I PROMISE I will take care of you. Thank you for buying from me,

---

Twenty-Five (25 Total) 10ml Wheaton Clear Borosilicate Glass Vial/Bottle perfect for Laboratory use where a sterile environment is needed.

         LOWEST PRICE ON ebay 

{OK the fine print, for sterile vials} If you can't prove it, then they aren't sterile; I'm starting to sound like a lawyer.

Simple - To the Point

THIS LISTING IS FOR 25 VIALS , NEW AMERICAN MADE, BULK PURCHASE, RECENT MANUFACTURE ROBUST!

Sterile MEANS No Pathogens (microscopic or other size bugs are dead, probably never got a foothold)

Sterile MEANS No Pyrogens (toxins left over from bugs after they are dead that make you sick)

Sterile through quality manufacture, Sterile through Autoclave processing, not done by other, be careful. I believe in the ancient tradition of honesty and integrity No fine print, no hidden feedback, my life is a open book, if its not right, I'll make it right, you want your money back, I'll give it back, and you can keep the bottles. YES I DO GET TAKEN ADVANTAGE OF, That's OK,"The Meek Will Inherit the Earth", buy with confidence. PLEASE READ ENTIRE LISTING BEFORE BIDDING.

This listing is for 10ml (plus some additional head space) clear Wheaton borosilicate glass serum bottles (Vials) with a 20mm industry standard opening (outside Diameter).  The size is 24mm diameter x 47mm tall (scientific stuff is always in SI units, there is 25mm to the inch), 1 inch diameter or so about 2 inches tall.  The ruggedness of the bottle facilitates is sterilization by gas, chemical, autoclaving, dry heat, gamma rays.

I can autoclave these bottles with or without closures . 

These bottles are commonly used for shipping, delivery, and mixing of low toxicity chemicals and biological cultures/media. Included is an industry standard septa serum synthetic rubber (not latex) closure and aluminum seal, the bottle will come sterile and sealed with a typically a "non removable" aluminum seal, you can remove the seal.  Under the aluminum seal is a reusable rubber closure.  The entire assembly is autoclaved with high pressure/temperature steam, and dried under high heat with high vacuum.   These will come sealed if you want the parts loose, you must ask for it.

This product is packaged in the least expensive container available. This type of container is used for that purpose. This container has a "Center Tear out Seal" Not a screw cap. Center Tear Out Seals are used as they are very inexpensive, for an inexpensive bottle. This is not for use as a means to facilitate injection into humans, animals, vegetables, or minerals; It is not for injection at all.  Please stop asking me if it for such use, selling items for injection is against US Federal Law.  Merely asking the question has apparently gotten me into trouble with PayPal (don't get me started about their draconian practices); they shut down my account, seized all my money, several thousand dollars, as punishment with no explanation. To access the contents (open the vial) you simply remove the "tab" covering the center, exposing the rubber under it.

If you don't know what this type of vial is used for you probably don't need it, please don't buy it.

Use this vial for storage and culturing bacteria, molds, etc. so long as such culturing is not against any laws, other items can be placed inside, so long as it is within the law.

PLEASE DON'T USE THIS FOR ANY ILLEGAL ACTIVITY, OR INFER SUCH.

▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼

How we monitor our processes to assure we are making sterile vials.

We use a Biological Indicator

A biological indicator is the only type of monitor that provides direct evidence that the sterilization process conditions are sufficient to kill bacteria and their spores. The worst kind of bacteria "spawn" from heat resistant spores (their offspring).  The biological indicator (small vials) we use contains Thermophilic Microbes that are highly resistant to the type of sterilization process we are monitoring .

How it is done

Using standard industry practices we include these little units (the yellow and purple small vials in Biological Indicator picture) to verify we're using a safe process to sterilize the vials.  The Vials contain a bacteria called Geobacillus stearothermophilus. (see below for explanation from Wikipedia*)  THESE (BIOLOGICAL INDICATOR VIALS ARE NOT SHIPPED TO CUSTOMER)

We buy these prepared vials specifically for this purpose.  We put one of the small plastic vials which contains the Thermophilic Bacteria, their robust spores, and its nutrients(nutrients are sealed in glass capsule) in with the vials being sterilized into the steam autoclave.  After autoclaving {high temperature and pressure} we pull the little vial out, break its nutrient capsule, and put it in the incubator.  Also we ready another vial (the control) and put it in the incubator.  The incubator holds the test vials at 135º F (57ºC), after a day or so we check the vials.  The biological indicator vial that has been in the autoclave will have all the Thermophilic bacteria and their spores killed and so will not show any growth as indicated by the vial remaining purple in color.  The "Control" vial will be yellow and turbid meaning the vials had "healthy" bacteria and spores to grow; this implies that both vials were good to use as biological indicators .

*Geobacillus stearothermophilus (formally Bacillus stearothermophilus) is a rod-shaped, Gram-positive bacterium and a member of the division Firmicutes.   The bacteria is a thermophile and is widely distributed in soil, hot springs, ocean sediment, and is a cause of spoilage in food products.   It will grow within a temperature range of 30-75 degrees Celsius.   Some strains are capable of oxidizing carbon monoxide aerobically.   It is commonly used as a challenge organism for sterilization validation studies and periodic check of sterilization cycles.   The biological indication contains spores of the organism on filter paper inside a vial.   After sterilizing, the cap is closed, an ampule of growth medium inside of the vial is crushed and the whole vial is incubated.   A color and/or turbidity change indicates the results of the sterilization process; no change indicates that the sterilization conditions were achieved, otherwise the growth of the spores indicates that the sterilization process has not been met.

 

▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼▲▼

     ▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄

       I hope I'm not making things worse by addressing this "non-issue" Depyrogenated (not really a word)

     STERILE VIALS HAVE NEVER HAD ANY BIOLOGICAL SUBSTANCES IN THEM (DEFINITION OF STERILE)

      I have been getting a lot of email lately asking me about this.  {I  know things}

      I have been in this business for a long time, vials have always not had any proteins of any type in them.

     Especially (Prions) I suppose what your really worried about (me to)

       From Wikepedia

         Depyrogenation refers to the removal of pyrogens from solution, most commonly from injectable pharmaceuticals.

         A pyrogen is defined as any substance that can cause a fever.

        Bacterial pyrogens include endotoxins and exotoxins, although many pyrogens are endogenous to the host.

        Endotoxins include . . . Endotoxins may become pyrogenic when released into the bloodstream or other tissue where they are not usually found.

        A prion   is a Protein that can fold in multiple, structurally distinct ways, at least one of which is transmissible to other prion proteins.

        It is this form of replication that leads to disease that is similar to viral infection.

       This infectious agent causes mammalian transmissible spongiform encephalopthies, including bovine spongiform encephalopathy

       (BSE, also known as "mad cow disease") . . .

Were on top of it, a good question.

▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄

Sold as is, Not returnable.  Be certain of what you’re buying before you bid. I'm not an ogre, nor am I trying to be devious; you would not want to buy an item like this if there was any possibility of tampering.  You will receive what you see and it will be what it says it is.  "It is what it is"   You can check my feedback, its not private, I have nothing to hide, my prices are low, I do the best I can, please be fair and honest with me, if your not "delighted" I will give you a refund. There may be slight variations in color and packaging, the aluminum seal comes in varying colors.
Please don't get confused by our manufacturing standards, please read my feedback if your concerned.  Quality can't be inspected into a product, it is or it isn't. Shipping:
Sometimes we need to ship VIA UPS. Generally if a lot of an offering is bought, the free shipping becomes huge amounts of shipping as by weight the USPS costs go up exponentially. Write if this is a problem.  Canada: NOTE: 1.  Import duties,taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility. 2.  Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. 3.  This is a high quality product, I'm sorry no one else sells this quality level, I provide Canadian shipping for those who want or as they say "need this" I have reinstated Canadian sales using Federal Express International Ground Shipping to Canada, I have been told that packages will arrive usually in 5 days or less.  It costs $36.34 for Fed Ex, and because of recent dishonesty by one customer and another who can't read or count I have to add signature confirmation, pay for customs Brokerage {not taxes, you work that part} build a special PayPal fund to cover credit card disputes and supposed fraud (I am truly sorry)  plus packaging costs, and I have to take it to a Fed Ex shipper in town.  PLEASE DON'T BUY FROM ME if you feel the cost is excessive ; no argument here, I can't loose money selling to Canada, it isn't fair to my US Customers. ONCE AGAIN IF YOU DON'T LIKE THE COSTS OR ANYTHING ELSE - DON'T BUY FROM ME.  I was getting beat up on performance numbers because First Class International shipping was taking 3 weeks.  Lets hope this does better. Customs:  You must provide a phone number, Please. Domestic: I have been working with EbaY tech support on/off for over a year; EbaY's shipping program has some flaws, It won't calculate shipping accurately,  I have First Class US Mail and Priority First Class listed, pick the lower of the two please, YES they expect you to do that, or me to send an invoice (which makes the cost to you go up), I'm sorry, if we want low shipping costs, this is how it must be done UNTIL EBAY FIXES THE PROGRAM.  Example: You can test this "glitch" by changing the shipping number from 1 to 2, or 4 you will see the cost doubles, and will double again.  The shipping calculator has problems with going from  8 ounces [6 ounce for vials, 2 ounces for packing, box, etc.]  For two items the shipping weight will be 8 ounces for the first item, 6 ounces for the second. I have the shipping costs figured to the penny, The cost of a 2 ounce stamp (figuratively) does cost $1.75 to ship 2 ounces First Class US Mail; This before buying boxes, padding, laser labels, tape and taking the box to the post office, which I need to add on for shipping to be accurate for you and me.  Performance Numbers: Please don't give me low performance numbers because your unhappy with shipping costs, EbaY literally has 4 out of 5 to be failing for a seller; I have the lowest prices on Ebay for these bottles because I get a 20% discount for my high performance marks.  Low marks mean higher prices, if there is a problem with my shipping PLEASE DON'T BUY FROM ME. Feedback:   I know your busy, me to, feedback is how we as an EbaY community tell each other how our buying experience is.  I'm sorry a few bad sellers holding feedback ransom from sellers as messed up the whole system, I have always left feedback when I ship, your getting the package has nothing to do with your honest rating. I enjoy selling on EbaY, I am disabled, this gives my some meaningful work to do; I keep the prices low for you and I both.  I have met some wonderful people through EbaY, keep writing with your questions and suggestions, I will keep reading, improving, and I Always answer my Emails; My mom taught me, you answer a letter when someone writes, of course in those days we put a stamp on our letters.
Thank you for buying from me. JJ Manufacturing Standards: GMP, USP Class 100, ISO 9001, ISO 2000, And yes - FDA Inspected (We passed)

Please ask questions prior to bidding. Thank you for looking!
International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

• Condition: New
• Brand: Delphi Ranch
• Country/Region of Manufacture: United States

See More