36V 20AH Li-Po /Li-ion Rechargeable E-Bike Battery with Slim Aluminum Case, Proprietary Battery Management System and Charger:
Recommend for use with 36V; 200W, 250W, 350W, 500W, 750W, 1000W Motors.
Matching Battery Rack is Optional
Voltage: 36v
Battery Model |
36V 20Ah |
Nominal Capacity (AH) |
20ah |
Nominal Voltage (V) |
36V |
Source Resistance (mΩ) |
about 40 |
Cell Specification |
3.7V 2.5AH |
Cell Combination |
8-parallel 10-series |
Cell Quantity (parallel*series) |
80 |
Discharge Cutoff Voltage (V) |
30 +/- 1V |
Charge Cutoff Voltage (V) |
42V |
Rated Discharge Current (A) |
30A |
Instantaneous Maximum Discharge Current (A) |
100A |
Maximum Continuous Discharge Current (A) |
30A |
Maximum Continuous Charge Current (A) |
5A |
Charge Mode |
CC/CV |
Standard Charge Current (A) |
2A |
Charge Time under Standard Charge Current |
10 |
Fast Charge Current (A) |
5A |
Charge Time under Fast Charge Current |
4 |
Charge Temperature Range |
-20 - 60 C |
Discharge Temperature Range |
-20 - 60 C |
Battery Size |
390*110*75MM |
Charging Cycles |
>700times |
Recommended for Motor |
Less than 1080w |
Battery Net Weight |
5.0kgs |
Battery Gross Weight |
6.5kgs |
Electrical Characteristic (Ta=25 ºC)
No. |
Parameter |
Min. |
Typ. |
Max |
Unit |
1 |
Input Charging Voltage |
54.4 |
54.6 |
54.8 |
V |
2 |
Input Charging Current |
|
3 |
5 |
A |
3 |
Output Discharging Current |
|
15 |
20 |
A |
4 |
Over-Current Discharging Protection |
40 |
45 |
50 |
A |
5 |
Current Consumption |
10 |
15 |
25 |
uA |
6 |
Balance Current |
40 |
45 |
50 |
mA |
7 |
Balance Voltage |
4.18 |
4.20 |
4.22 |
V |
8 |
Over-Charge Protection Voltage |
4.18 |
4.20 |
4.25 |
V |
9 |
Over-Charge Protection Voltage Release |
4.05 |
4.10 |
4.15 |
V |
10 |
Over-Charge Protection Voltage Delay Time |
1.0 |
1.5 |
2.0 |
S |
11 |
Over-Discharge Protection Voltage |
2.67 |
2.75 |
2.83 |
V |
12 |
Over-Discharge Protection Voltage Release |
2.9 |
3.0 |
3.1 |
V |
13 |
Over-Discharge Protection Voltage Delay Time |
1.0 |
1.5 |
2.0 |
S |
14 |
Short Circuit Protection Release |
Remove the load | |||
15 |
Impedance |
|
8 |
15 |
mΩ |
16 |
Operating Temperature |
-15 |
+25 |
+60 |
ºC |
17 |
Storage Temperature |
-20 |
+25 |
+70 |
ºC |
Parts included:
1. Lithium Battery with Aluminum case , mounting plate and key switch
2. Built-in 30 Amp Proprietary BMS board
3. Wall Charger (54.6V 2.0A 100-240V 50/60HZ US PLUG)
Matching Battery Rack is Optional
Features:
Proprietary Battery Management System which automatically provides protection from voltage, current and temperature problems, including over-current, overvoltage, under-voltage and short circuit protection.
Powerful 20Ah capacity with less than 60 percent discharge of battery capacity (for extended battery life). This can safely and reliably power any motor up to 1000 watts.
Key switch for locking out battery power.
Handy aluminum carrying case with handle.
Optional aluminum matching mounting rack.
Range:
60-100km for the 36v 1000w ebike motor.
50-70km for the 36v 1500w ebike motor
Note: The BMS Battery management system is the heart of any rechargeable battery pack. This is what determines how long your batteries will last, how much power they retain and how many usable recharge cycles you can expect. Before you buy any battery pack, be sure your BMS is properly engineered to work with your batteries to assure longer service life and safety.