Product Feature:
* Application: Designed for clamp-on outboard motors up to 35 HP. Suitable for skiffs, aluminum boats, and inflatables.
* Wooden Block Included: Same as MJ-1-DP Jack Plate, Wooden Block Model # WOOD0002. Jack plate comes with pre-cut and pre-grooved wood block for a perfect fit. Ensure more firm and reliable installation of the motor.
* Function: Extends 4" off transom. Small boat that made for short shaft outboard engine equipped with a long shaft engine which results in not optimal performance and handling. This jack plate is designed to firmly attach to the transom and provides a higher mounting position for the engine.
* Benefits: Improves performance and handling of smaller or lighter boats. Allows long shaft motors mount to shorter shaft transom boats.
* 4" Setback: The jack plate extends 4" off transom. Engine mounting surface is 11-1/2" x 10", 4" Setback and 3" Vertical. Width of transom mounting flanges is 17". Max weight capacity: 150 lbs.
* Satisfaction Guarantee: CTY-Auto aims to provide the best service for our customer and built to provide exceptional levels of durability, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days. We support 12 month's Warranty. If you have any problems about our products, please feel free to contact us.
Product Description:
Small Engine Jack Plate for Outboard Motors Up to 35HP
. Designed for clamp-on outboard motors up to 35 HP. Suitable for skiffs, aluminum boats, and inflatables.
. WOODEN BLOCK INCLUDED. Wooden Block Model # WOOD0002. Jack plate comes with pre-cut and pre-grooved wood block for a perfect fit. Ensure more firm and reliable installation of the motor.
. The jack plate extends 4" off transom. Engine mounting surface is 11-1/2" x 10", 4" Setback and 3" Vertical. Width of transom mounting flanges is 17". Max weight capacity: 150 lbs.
How To Install Jack Plate for Outboard Motors?
Step 1:
1. Place the Jack Plate in the center of transom.
2. Clamp Jack Plate in place and drill six holes. Using six bolts (minimun size of 3/8”) mount jack plate to transom. 3. Use washers, lock-nuts and protective sealant around bolts. Tighten all bolts then remove clamps.
Step 2:
1. Mount engine to Jack Plate. Make sure that the wooden block is inside Jack Plate. Tighten engine mounts securely.
2. Drill two holes in the bottom of engine bracket and bolt bracket to jack plate with bolts, washers and locknuts. Be sure to bolt through wooden block.
Item Specifics | |
---|---|
Brand | CTY-Auto |
Manufacturer Part Number | MJ-1-DP |
Warranty | 1 Year |
Type | MJ-1-DP Jack Plate 4'' Setback Engine Jack Plate |
Material | Aluminum, Wood |
Fitment | For Clamp-on Outboard Motors Up To 35 HP |
Color | Silver |
Number of Pieces | 1 |
Set or Single Item | Single Item |
Engine mounting surface | 11-1/2" x 10 , 4" Setback and 3" Vertical |
Width of transom mounting flanges | 17" |
Max weight capacity | 150 lbs |
We accept payment visa payonner, paypal, credit card, debit card and many other mothods.
ShippingOrders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities.
Returns1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to 20% re-stocking fee.
3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Contact UsIf you have any question, please feel free to contact us 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US |
Shop Category Store Home
Other Body Mount Bushing Kit
|
MJ-1-DP Jack Plate 4'' Setback Small Engine Jack Plate for Outboard Motors Up to 35HP (Wooden Mounting Block Included) Manual Add Distance Between Engine and Transom
Product Feature:
* Application: Designed for clamp-on outboard motors up to 35 HP. Suitable for skiffs, aluminum boats, and inflatables.
* Wooden Block Included: Same as MJ-1-DP Jack Plate, Wooden Block Model # WOOD0002. Jack plate comes with pre-cut and pre-grooved wood block for a perfect fit. Ensure more firm and reliable installation of the motor.
* Function: Extends 4" off transom. Small boat that made for short shaft outboard engine equipped with a long shaft engine which results in not optimal performance and handling. This jack plate is designed to firmly attach to the transom and provides a higher mounting position for the engine.
* Benefits: Improves performance and handling of smaller or lighter boats. Allows long shaft motors mount to shorter shaft transom boats.
* 4" Setback: The jack plate extends 4" off transom. Engine mounting surface is 11-1/2" x 10", 4" Setback and 3" Vertical. Width of transom mounting flanges is 17". Max weight capacity: 150 lbs.
* Satisfaction Guarantee: CTY-Auto aims to provide the best service for our customer and built to provide exceptional levels of durability, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days. We support 12 month's Warranty. If you have any problems about our products, please feel free to contact us.
Product Description:
Small Engine Jack Plate for Outboard Motors Up to 35HP . Designed for clamp-on outboard motors up to 35 HP. Suitable for skiffs, aluminum boats, and inflatables. . WOODEN BLOCK INCLUDED. Wooden Block Model # WOOD0002. Jack plate comes with pre-cut and pre-grooved wood block for a perfect fit. Ensure more firm and reliable installation of the motor. . The jack plate extends 4" off transom. Engine mounting surface is 11-1/2" x 10", 4" Setback and 3" Vertical. Width of transom mounting flanges is 17". Max weight capacity: 150 lbs.
How To Install Jack Plate for Outboard Motors?
Step 1: 1. Place the Jack Plate in the center of transom. 2. Clamp Jack Plate in place and drill six holes. Using six bolts (minimun size of 3/8”) mount jack plate to transom. 3. Use washers, lock-nuts and protective sealant around bolts. Tighten all bolts then remove clamps.
Step 2: 1. Mount engine to Jack Plate. Make sure that the wooden block is inside Jack Plate. Tighten engine mounts securely. 2. Drill two holes in the bottom of engine bracket and bolt bracket to jack plate with bolts, washers and locknuts. Be sure to bolt through wooden block. We accept payment visa payonner, paypal, credit card, debit card and many other mothods. ShippingOrders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities. Returns1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice). 2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to 20% re-stocking fee. 3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Contact UsIf you have any question, please feel free to contact us 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us. All rights reserved. |