Passive PoE Injector Switch / PoE Power Swith
PASS CE & ROHS TEST
9 Ports (1*Uplink, 8 *PoE) 10/100Mbps
Compatible with IEEE 802.3af/at
Midspan Mode-B Unsolicited Power(4,5+/7,8-)
Price do not included power adapter .
( can select from 12v to 55v power adapter according to actual requirements )
9 port network switch poe 8 port 12v 15v 18v 24v 36v 48v 50v wide range power supply dc adapter for mimosa / ubnt / wifi nanostation
Used for wireless AP,Security CCTV IP camera,IP telephone,wireless bridge,IP print server etc.
Double check if your devices suitable for this switch. If not sure,welcome to contact us before place order!
1, this switch+15v6a power adapter→to power 12v poe wifi access point
2, this switch+15v6a power adapter+passive poe splitter →to power 12v non-poe ip camera
3, this switch+24v3a/6a power adapter →to power UBNT/MikroTik/Mimosa 24v poe wifi access point/router/CPE
4, this switch+48v2a/3a power adapter →to power 48v passive poe ip camera/ip phone(4/5+,7/8-)
If your device does not support poe,need to add a passive poe splitter cable!
If your device only support 1/2+,3/6- poe,this product is not suitable for you,and you can buy our IEEE802.3af POE switch.
It is a non standard passive poe switch,power pin 4/5+,7/8-,supporting wide range voltage input from 12-55v.
POE distance max 150meters(48v power supply), 75meters(24v power supply),40meters(15v power supply).
This is an Passive Power Over Ethernet of 9 port 10 / 100Mbps-T Ethernet switches, including 8 unsolicited PoE Ethernet ports and 1 Uplink ports. Support 12v 15v 18v 24v 36v 48v 50v power supply adapter, any one of the 8 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable.
This passive poe power switch compatible with IEEE 802.3af/at Mode-B(4,5+/7,8-) , but it can not detect the 802.3af/at terminal device.
It supplies power NO MATTER WHAT, so don't plug the "Power Link 1~8" side into anything not fit for it .
This POE switch only support 10/100Mbps, PoE ports do not support Gigabit ethernet, because "Power Link 1~8" port using 4,5,7,8 pin for power transfer, Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "Power Link 1~8" port, this will damage your device.
Gigabit(1000Mbps) ethernet Uplink device can only access "Up link" port, Please do not access it to "Power Link 1~8", it will damage your device.
Compatible all 802.3af/at device , such as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....
Features:
Specification:
ALL Port: | Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode ,must work with 4 pairs UTP Cat5/5e/6 cable . | |||||
Power Link Port 1-4: | any supported unsolicited power on pairs 45-78 pins compliant Powered Devices (PDs) |
Power LED | LED ON : power on. LED OFF : power off | |||||
Yellow Light LINK/ACT | LED ON Indicates the port is connected to a network device and it is working | |||||
LED OFF Indicates that this port is not connected to a network device or stop working |
Standard | IEEE 802.3 10BASE-T Ethernet | |||||
IEEE 802.3u 100BASE-TX Fast Ethernet | ||||||
IEEE 802.3x Full-Duplex flow control | ||||||
Protocol | CSMA/CD Ethernet | |||||
Data Transfer Rate | Ethernet: 10Mbps (Half Duplex),20Mbps (Full Duplex) | |||||
Fast Ethernet: 100Mbps (Half Duplex) ,200Mbps (Full Duplex) | ||||||
Network Media(Cable) | 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) | |||||
100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) | ||||||
PoE Power on RJ45 | Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8 | |||||
DC Output: 12-55V according to the power adapter you use, max power per port is 30W. | ||||||
Number of Ports | 9 x 10/100Mbps Auto-Negotiation RJ45 ports with 8 PoE enabled (port-1 ~ port-8) | |||||
AC Power Adapte | Not included | |||||
Power Consumption | 3.2 Watts (max. no PD connected) | |||||
According to the actual power consumption of equipment | ||||||
Temperature | Operation Temperature:0 ~40℃ (32 ~104℉ ) | |||||
Storage Temperature: -40 ~70℃(-40 ~158℉) | ||||||
Humidity | Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing | |||||
Product Dimensions | 198mm W x 74mm D x 30mm H | |||||
RAM Register Capacity | 64K bytes per device | |||||
MAC Address List | 1K entries per device | |||||
Frame Forward Rate | 10Mbps Ethernet: 14880pps/Port | |||||
100Mbps Ethernet: 14880pps/Port |
Item Included:
9 ports 8 PoE Unsolicited(Passive) PoE switch x1
15 Months Warranty from the date of purchase, exclude man-made damage or improper use.
Feedback:
· WX ELECTRONIC is a professional supplier, work on poe swith / poe injecter / poe splitter / poe cable, sincerely to supply good quality product to client.
· If you are satisfied with our items, please kindly leave us 5 Star feedback.
Warranty: 15 months, exclude man-made damage or improper use.
Shipping:
· Ship to US and worldwide.
· Ship within 2 business day, after receive payment.
· Ship via ePacket post / Economy Int’l shipping, it takes 7-25 business days. Arrival time depends on some factors and different areas.
· Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses.
Shipping Pricing:
· Shipping cost base on Economy Int’l shipping.
· To use the UPS/DHL/Fedex services, please email us for quotation.
· Any questions or concerns, please feel free to contact or call +8617701987150.
· Please contact us before leaving any negative or neutral feedback, 1 or 2 star ratings, or open claims. We would try best to solute the problem.
Payment: We accept PayPal payment and all major credits through Paypal only.
· If you are not satisfied with items for any reason, you could request for an exchange or refund within 30 days since received order. Buyers will be responsible for any shipping and handling charges for returns or exchanges.
· Items returned or exchanged, must be in new and sell-able condition.