Big Block Chevy Drag Race Engine All Aluminum Pro-Built 1,900hp+ Dyno Tuned

Unsold See similar items $33,971.27 Buy It Now, 14-Day Returns, eBay Money Back Guarantee
Seller: mikepetraliashardcorehorsepower ✉️ (902) 100%, Location: Franklin, Tennessee, US, Ships to: US, Item: 201704663662 Big Block Chevy Drag Race Engine All Aluminum Pro-Built 1,900hp+ Dyno Tuned.

BIG BLOCK CHEVY PROFESSIONAL

ALL-ALUMINUM DRAG RACE ENGINE

Hardcore Horsepower, LLC has been making serious power for more than three decades. We've built, dyno tested & tuned, and raced thousands of engine combination's and have devised some of the best recipes for ultimate, reliable, power anywhere on the planet!

All parts used to build these engines are the highest quality available giving them the utmost in durability and continued power potential.

 On the outside we make each engine look as good as it runs (Former test engine shown in photos). They're dyno-tuned, certified, and ready to perform. If you're looking for the ultimate lightweight, Big-Block Chevy race engine, you need to call Hardcore Horsepower, LLC!

  Why buy a Hardcore Horsepower Drag Race Engine?

  • All Hardcore Horsepower engines are built one at a time to ensure perfection.
  • We blueprint our assemblies to within +/- .0002" or +/- .5 gram where possible. Blueprint spec sheets are supplied with engine.
  • We only use parts and packages that we've tested and are sure will produce accurate and repeatable power.
  • We have thousands of dyno runs to rely on for making the best power from every combination.
  • We have a "no-compromise" Q&A inspection program. If the parts are not absolutely perfect, we either make them perfect, or send them back.
  • All engines are dyno tested/tuned in-house before delivery.
  • We keep our business small. It is 100% privately, American-owned, meaning we don't answer to any investors who're only interested in making money.

We're only interested in making POWER!!!

Bottom line - Our motto has always been

"Do it once. Do it right. Or don't do it at all!!!"

Note: Only the parts listed below are included with this engine, unless noted otherwise .

HP: 1,000+ N/A; 1,900+ w/ N2O

Compression ratio: 15:1+

RPM range: 4,000-8,000+ rpm

Fuel req'd: 114-120+ octane race gas (Can be setup to run Methanol, please specify your choice)

  • BLOCK: ARIAS ALUMINUM 6 BOLT, WET BLOCK, DEEP SKIRT w/ 9/16" dIa. MAIN STUDS & 1/2" dia. MAIN CAP SIDE BOLTS, AND 1/2" dia. HEAD STUDS ANCHORED AT THE MAIN WEB TO GIVE THE DECK SURFACE MAXIMUM RIGIDITY AND THICKNESS
  • CAM: COMP CAMS SOLID ROLLER CUSTOM DRAG RACE, N2O PROFILE
  • CAM DRIVE: JESEL BELT DRIVE
  • CARB: DYNO-TUNED 4500 DOMINATOR
  • CONNECTING RODS: OLIVER PARABOLIC I-BEAM 4340 FORGED USA STEEL (Alum. rods also available )
  • CRANKSHAFT: LUNATI PRO 4340 FORGED USA STEEL
  • CYL HEAD: DART PRO1 ALUMINUM, FULLY CNC-PORTED, O-RINGED, DEL-WEST TITANIUM VALVES, COPPER/BERYLLIUM SEATS, TRIPLE ROLLER SPRINGS
  • CYL HEAD GASKETS: COPPER
  • EXHAUST HEADERS: *NOT INCLUDED
  • FLYWHEEL or FLEXPLATE: *NOT INCLUDED
  • FRONT-MOUNTED ACCESSORIES: (i.e. A/C, ALTERNATOR, WATER PUMP, POWER STEERING, ETC.) *NOT INCLUDED
  • FUEL PUMP/PLUMBING: *NOT INCLUDED
  • HARMONIC DAMPER: ATI RACE DAMPER, SFI-APPROVED
  • IGNITION SYSTEM: MSD BILLET DISTRIBUTOR & CRANK TRIGGER
  • INDUCTION SYSTEM: EDELBROCK SUPER VICTOR MANIFOLD FULLY-PORTED & PLUMBED w/ N2O FOGGER & PLATE SYSTEMS
  • LIFTERS: JESEL ALUMINUM "DOGBONE" SOLID ROLLER .905" DIA.
  • N2O SYSTEM: WILSON "PRO-FLOW" 300+HP PLATE & 600+HP FOGGER w/ TWO 10-LBS. EMPTY BOTTLES w/ 6AN SUPPLY LINES/FITTINGS & COMPLETE PURGE SYSTEM WIRED AND PLUMBED READY TO RACE
  • N2O CONTROLS: PROGRESSIVE N2O SYSTEM CONTROLLER INCLUDED
  • OIL SYSTEM: 2-pc BILLET FAB ALUMINUM PAN, DRY SUMP OIL PUMP & INLINE OIL FILTER, and DRY SUMP OIL TANK (Wet sump oiling system is optional)
  • PISTONS: WISECO 2618 FORGED ALUMINUM DOME PISTONS
  • RINGS: TOTAL SEAL GAPLESS
  • ROCKER ARMS: JESEL PRO ALUMINUM SHAFT ROCKER SYSTEM
  • VACUUM PUMP SYSTEM: 3V BILLET ALUMINUM WITH 2qt BREATHER TANK
  • VALVE COVERS: BILLET FABRICATED ALUMINUM w/ SCREW-IN OIL FILL CAP & -12AN BULKHEAD
  • VALVETRAIN: 7/16" TAPERED PUSHRODS, TRIPLE SPRINGS, TITANIUM RETAINERS, HARDENED LASH CAPS

We install and tune! Purchase this item and receive professional installation, initial set-up, and dyno tuning at Hardcore Horsepower, LLC! (Installation and dyno tuning costs are extra)

If item is picked up, or shipped within the state of TN, must add 9.25% sales tax.

No-interest 12-month Layaway plan available

Terms: Minimum 20% down payment due at close of sale. The remaining balance due will be divided into 12 equal payments due each month thereafter until balance is paid in full. Item will be built and/or ordered and shipped after full payment has been received.

Engines will take approximately 4-12+ weeks to build. All Deposits and Layaway payments are non-refundable.

Photos shown are representational only.

See Hardcore Horsepower eBay Store for Warranty Details.

All items are subject to availability and may be substituted without notice.

Feel free to call for more info or to customize your kit accordingly.

Photos shown are representational only.

Actual item may differ.

Hardcore Horsepower, LLC Franklin, TN 615/595-0060 10am-6pm Monday thru Friday USA Central Time

Check out all of the other great deals available in our store!!!

We Make It Go Fast!!!

WARNING

Some of the products sold in this store contain/may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

California Health and Safety Code Section 25249.6

 

*Item is available for local pick-up, or will be shipped to US-48 states only by carrier of our choice.

*Allow 5-10+ days for delivery.

*Engine blocks will be shipped by truck to commercial addresses in US-48 states only. Residential shipping may be available in some areas for extra $$$

*Customer must arrange for unloading engine block pallet/crate weighing 200+ lbs from tractor trailer.

*All other items will be shipped Ground UPS to commercial or residential US-48 states only.

* International Shipping is available for extra cost.

 

  • Condition: New other (see details)
  • Country/Region of Manufacture: United States

PicClick Insights - Big Block Chevy Drag Race Engine All Aluminum Pro-Built 1,900hp+ Dyno Tuned PicClick Exclusive

  •  Popularity - 29 watchers, 0.2 new watchers per day, 153 days for sale on eBay. Super high amount watching. 0 sold, 1 available.
  •  Best Price -
  •  Seller - 902+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive