Foundation machine mill finish, Beeswax rollers for the production of honeycombs

Sold See similar items $543.54 Buy It Now or Best Offer, eBay Money Back Guarantee
Seller: kuzlion ✉️ (408) 0%, Location: Gulkevichi, RU, Ships to: WORLDWIDE, Item: 252717335640 Foundation machine mill finish, Beeswax rollers for the production of honeycombs. Rollers for honeycombs with a maximum angle of 120 degrees cell hand-engraved for worker  bees. : : Apiroy pheromone included : : Default beeswax rolls set to 11-12 sheets on 1 kilogramm (recomended thickness). Why benefit? - This machine will save your much money in the future.

- Always quality honey combs produced from purely own raw materials!

- V ery   easy to install.
Dimensions (mm): 380 × 150 × 95, the width of the engraving 300 mesh size 5,4 ± 0,05 This is for worker bees. The diameter of the rollers 59 mm. Weight (kg): 6.40 Materials and components used in the manufacture of the goods: the kit includes:
1.  Etched shaft made of special durable and hardened steel, coated with a special (non-wax gives priliput) protective polymer - 2 pcs; 2.  Base assembly - 1 pc; 3.  Bearing - 4 pieces; 4.  Remote Ring - 2 pieces; 5.  Gear - 2 pcs; 6.  Spacer gear; 7.  Screw locking M6 - 1 pc; 8.  Bolt locking - 2 pcs; 9.  Damper - 2 pcs; 10.  Adjusting Bolt M8 - 2 pieces; 11.  fixing bolts M8 - 4 pieces; 12.  Spacer body - 4 pieces; 13.  Pen - 1 piece; 14.  Detailed instructions for use of Russian - 1 pc. 15. English Manual - 1 pc. Description: This is beeswax rollers for worker bees. It is the most natural angle cell 120° slope of the larvae cells. Default beeswax rolls set to 11-12 sheets on 1 kilogramm (recomended thickness). Production smooth plates: combs made of thin plates of wax which is most simply obtained by immersing or thin glass plates (e.g., plywood) with a size of 400 × 265 × 3 mm in the molten wax. The immersion and taking out a template of the molten wax should take place without delay. 3-4 seconds it is cooled in air and then dive again and taking out. Thus, layer after layer is formed by a smooth sheet of wax. Usually it is sufficient to repeat the procedure 3-4 times to build up a sufficient thickness of the template. Installing the roller: it is best to install the rollers on the board of any thickness chipboard, whose plane is 680 × 320mm. Edge should reliably paint over the paint to isolate it from moisture. Four pieces of wood 30 mm high and 20 mm in width must form together with chassis roller tray, which will subsequently be poured release agent solution. The first board is fastened with screws to the bar of 320 mm. The next step should be close to the bar to attach the body rolls. Next on the perimeter of the remaining three bars are sewn. The variant using as bath galvanized steel. Preparing for rolling: formed with the board bases tub filled with a liquid release agent. As such a composition can take honey Situ liquid or a solution consisting of glycerin soap or other soap white odorless, which adds a certain amount of glycerol (in 1 liter of water and 100 g of soap 2 h. Spoon glycerol). In Situ 1g can add funds to attract a swarm of Apiroy pheromone (http://www.ebay.com/itm/Apiroy-For-attracting-bait-for-the-swarms-bee-colonies-pheromon-beekeeping-/252518259213?hash=item3acb42da0d:g:OEgAAOSwKtVW0lzH) containing a queen bee pheromones. Careful rotation of the handle, make sure that the rollers rotate easily. This wetting achieve both shaft surface. Rolling: through laminating rollers engraved workpiece to be smooth, that have been made in advance and lie down had a few days in air at room temperature. Aged smooth sheets have greater strength in comparison with the just manufactured workpieces. Smooth waxy leaf is placed in a bath of liquid separation, and moving forward with your left hand. Its front edge abuts on the guide into the gap between the rollers. At this time, the right hand should gently turn the handle on my own. Maintenance and storage: in the end of its rollers, they should be rinsed with clean water and dry. Keep gear in a dry place at temperatures between + 5 ° to + 40 ° C. Delivery from Russia Federation. Delivery time 2 - 4 weeks.
  • Condition: New
  • Country/Region of Manufacture: Russian Federation

PicClick Insights - Foundation machine mill finish, Beeswax rollers for the production of honeycombs PicClick Exclusive

  •  Popularity - 18 watchers, 0.5 new watchers per day, 35 days for sale on eBay. Super high amount watching. 5 sold, 0 available.
  •  Best Price -
  •  Seller - 408+ items sold. 0% negative feedback. Good seller with good positive feedback and good amount of ratings.

People Also Loved PicClick Exclusive