The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube, so this flowmeter will handle MIG and TIG welding both steel and aluminum. The fitting is a CGA-580 fitting, so it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. This does not fit CO2 cylinders. If you want a CO2 Flowmeter see our listing for those.
A very nice thing about this Flowmeter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut.
Watch out for knock-off flowmeters that do not use the standard N-24 nut and NP-72 outlet nipples. These flowmeters use nylon washers to seal, where our fittings seal on the fitting and do not require any nylon washers! Also, watch our for import flowmeters that do not have CGA-580 fittings - they will not connect to your tank!
If you need a gas hose to go with this flowmeter they are available in our store under e-bay item number 140781122107.
***Save on shipping by combining purchases of select MIG, TIG, or Plasma parts. However, you must pay for all items with one combined payment for this shipping discount. Separate payments for each item are not eligible for a shipping discount .
Go to our store and see all the items we have for sale: https://stores.ebay.com/welders4less
If you need any other hard to find welder parts that are not listed, send us an e-mail with a digital photo- we might have just what you need.
Buy in confidence from HTP America, Inc., your total welding specialist since 1981, where all we sell are quality welding supplies at affordable prices. Please send us a message if you have any questions on our items.
12020-30