24"(600mm) Acrylic Light Box Plastic PVC Bending Machine, Heating Bender

24"(600mm) Manual Acrylic Light Box Plastic PVC Bending Machine Heater, 1-6mm Thickness Fast shipping from Monday to Friday • The  acrylic bending machine heater is the core part of bending machine. You can assemble various kinds of ideal practicalacrylic bender  with this heater.  • Processing Material:  Acrylic, Plastic, PVC, Plexiglass. • Used for: This  acrylic bending  machine heater can be widely used in decoration engineering, sign  making, display cabinet, aquarium wrapping, lighting  LED  channel letter, bending the supermarket  shelves, curtain wall, large light box, acrylic plates and plastic plates. • The acrylic bending machine heater can bend all kinds of plastic sheet. If the thickness of acrylic sheet  is beyond 6mm, you can use two heaters heat the top and bottom of the sheet at the same time, or you  need to cut a slot on the sheet.  • You can also use many acrylic bender heaters to heat more bents at the same time. • Reasonable design, small size, compact structure and beautiful appearance; • Heat even and temperature adjustable; • With circulating cooling water system on both sides of heating pipe; •  power supply joint and waterpipe joint are at the same end; • The body is made of special aluminum extrusions. • Portable, small occupation, low consumption and reliable operation; • Light and practical with low cost, value-priced; • Circulating cooling water system can make sure other parts (no heating is required) won’t get thermal deformation. • Free plugging and unplugging, easy to storage and assembles to worktable very conveniently; • Straight appearance, the effective heating length is 610mm (24"). • Low consumption, low cost; • Can be assembled to a hot bending machine or used alone; • Save space, light and practical; • Can bend all kinds of plastic sheet. Model ABM-BT-600 Maximum Bending Width 610mm (24") Power 1500W Power Supply AC 100V - 240V, 50Hz or 60Hz Heating Slot Width 8mm Heating Thickness 1mm - 6mm  (0.04" – 0.24") Heater Size 1.8" x 1.8" x 33.5" (45 x 45 x 850mm) Heater packing size 4.9'' x 4.9'' x 38" (125 x 125 x 965mm) Box packing Size 13.8'' x 7.9'' x 7.1'' (350 x 200 x 180mm) Gross Weight 6kg Temperature tips: • The temperature at the central of heating tube is the highest, which can be up to 500°, and greater the distance from the central the lower the temperature. • Actually, the appropriate temperature for bending acrylic is about 240°. • The heater can work 24 hours a day on the circumstance that the water temperature is not high. Water outlet material     The copycat are using the copper water outlet, the bronze looks really good and I think everyone think copper part will be better than others, but you should know the basic thing is the water will corrode copper and make it rusty and get holes, which will cause water leak.  Beside this copper part price is not higher than our nylon material part. The water oulet of our acrylic bender is Nylon material, the reason we use this material is this material do not inflate during water current flow and it do not have water corrosion problems. Alchrome Heating wire inside     The copycat heating wire width is not even and its material is not pure Alchrome, if the material is not pure, that will cause part of different temperature. It cause part of Acrylic is soft and other part is still hard. It will cause second time bending or part of Acrylic crack.  The heating wire of our acrylic bender is made by screw pitch which will insure the width and have even temperature to bend acrylic sheet. Thermostat   Copycat's thermostat is common thermostat without heat dissipation base. Thermolator of our acrylic bender is Solid-state thermostat, theirs are common thermostat We also design 4 stands below this thermostat to make sure has better heat dissipation. ABM-BT series acrylic bending machine heater has wide applications, such as lighting LED channel letter making, sign making, display cabinet, supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates making, etc. CS-HD-BC06 Model Sign Letter Tool is mainly used for lighting luminous channel letters or characters.                                                                                                                                                                                                                                      ABM-BT series acrylic bending machine heater is core part of bending machine, it soft the acrylic, you need to bend acrylic by hands. It is space saving, low cost. ABM-SB series acrylic bending machine bends acrylic by electric, with super high precision, but it is expensive relatively.                                                           Processing Material: Acrylic, Plastic, PVC, Plexiglass This acrylic bending machine heater can be widely used in decoration engineering, sign making,  display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves,  curtain wall, large light box, acrylic plates and plastic plates. Packing list:   Bending Machine Heater  1 pc     Water pump 1 pc    Silicone hose   2 pcs   Temperature controller  1 pc

• Condition: New
• Brand: Unbranded
• Model: 24"(600mm)
• MPN: ABM-BT-600
• Material: 1-6mm Thickness Acrylic Plastic PVC
• Type: bending mahcine
• UPC: 604776906384

See More