New Replacement Motorcycle Radiator SUZUKI OEM# 1771047H10, 1771047H00

Manufacturer Limited  One Year  Warranty

Our products carry a Manufacturer Limited One Year Warranty against workmanship and materials under normal driving conditions as long as the original purchaser owns the vehicle in which the parts were installed.  Any alternations or problems due to improper installation will not be covered.   In the event of failure due to defect in material or workmanship, the original purchaser is responsible for the cost of labor, antifreeze and any additional parts required for re- installation.

All vehicles used for commercial use like police vehicles, rental vehicles or any other fleet vehicles are excluded from  our   warranty due to extreme conditions beyond normal usage.

Also excluded from warranty are cooling products that have been   altered, subjected to misuse, abuse, negligence or operating conditions other what such equipment was designed. This also does not cover damage to connection threads stripped during installation or any chemical effects of water, steam, or other liquid, gases or agents present in the system or operating environment of the equipment or the failure of the vehicle warning system.

Flushing the system

It is important to flush (Drain and refill) your vehicles cooling system before installing the new radiator. Failure to do this will void warranty.  Distilled water is recommended to mix with your manufacturers recommended coolant. Evidence of hard water in the radiator will void warranty.

Warranty Exclusions

Warranty excludes  commercial vehicles  due to extreme conditions.

1.  Improper installation: Damage as the result of improper or incomplete installation, or abuse by the installer.

2.  Stripped threads: Cross-threading any fitting that results in damage to the threads. 

3.  Excessive heat  is the most common cause of radiator failure. Radiators are very vulnerable to steam erosion.

4.  Electrolysis:  Aluminum is vulnerable to electrolytic corrosion because aluminum is a highly reactive metal.

5.  Extreme Pressure:  Splits in radiator seams or between the tubes and header may be the result of too much pressure in the cooling system.