Alignment method | Precise core alignment and cladding alignment |
Applicable fibers | Any common optical fibers.rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653,ITU-TG.655 and ITU-TG.657 |
Optical fiber diameter | Cladding:80~150mm,coatinglayer:0.1~3mm |
Cuttlinglength | 5-16mm(coated optical fiber diameterle250mum);10mm(coated optical fiberdiameter:0.25~3mm) |
Fusion splicing consum ption(typical value) | 0.02dB(SMF);0.01dB(MMF);0.04dB(DSF);0.04dB(NZDSF) |
Retum loss | Better than 60dB |
Fusion splicing time (typical value) | 7s |
Heating time(typical value) | 18s |
Pulling force test | 1.96~2.25N |
Thermal shrinkagetube | 60mm,40mm and a series of thermal shrinkage tubes |
Graphical display | High-performance 4.3 inch lcd |
Magnification time | 320 times/88 times |
Fusion splicing record | 10000 groups |
Battery capacity | 11.1V,6800mAh,typical value offusion splicing and thermal cycle is 330 times |
Battery servicelife | Cycle charging times reach 300-500,can be replaced by customers |
Electrode servicelife | Typical value is 4000 times,can be replaced by customers |
Construction lighting | Built-in lights with high-brightness and wide lighting area |
Working environment | Temp:-10~50℃;hum:0~95%RH,height above sealeve1:0~6000m |
Operation interfaces | GUI graphical operation interfaces |
Extemal power | AC:AC100~240V,60Hz,0~1.5A,DC:DC10~15v |
Extemal port | USB/SD |
Dimensions | 120mm(W)times130mm(H)times154mm(D),(without rubber anti-vibration pad) |
Weight | 1.59kg(host engine).0.37kg(battery) |
【High Accuracy and Low Splice Loss】 -----Orientek T45 Fusion Splcier 7s fast splicing, 18s highly efficient heating, 4 high precision motors. Auto checks fiber end-face technology, temperature and pressure compensation, high-speed image processing technology and special precision-positioning technology ensures high accuracy and low splice loss. |
【All-in-one fixer】 ----Orientek T45 Fusion Splicer the all-in-one fixture meet fusion demands of multiple optical fibers, jumpers and rubber-insulated wires with a cladding diameter of 80~150μm. 【Intelligent heat shrink】 ----Orientek T45 Fuion Splicer with a detection unit is embedded in the heater. The heating function will only be enabled when the protection sleeve is put in the heater, to avoid mishandling. 【Pluggable lithium-ion battery of large-capacity】 ----Orientek T45 Fusion Splicer built-in pluggable lithium-ion battery of large capacity. It can be recycled use for 220 times (Splicing+ heating ) after each full charge 【Ceramic V-groove and ceramic presser foot】 ----Orientek T45 Fusion Spliccer's Ceramic V-groove with high precision brings you convenient and accurate placement of optical fibers and makes cleanup easy. |
【Graphical interfaces and touch screen】
----Orientek T45 Fusion Splicer uses entirely new GUI and touch screen in design. Operators can set up the splicer and get to know relevant information of it simply and directly by graphical interfaces.
2: TR600-S OTDR Specification
Model | SM OTDR TR600 SV20A |
Wavelength(nm) | 1310/1550 |
Dynamic range(dB) | 32/30 |
Pulse width (ns) | 5,20,40,80,160,320,640,1280,2560,5120,10240,20480 |
Display | 5.6 inch TFT LCD touch screen |
Event blind zone (m) | 3 |
Attenuation blind zone (m) | 13 |
Linearity (dB/dB) | plusmn0.05 dB/ dB |
Loss threshold (dB) | 0.05 |
Loss resolution ratio (dB) | 0.01 |
Sampling resolution ratio (m) | 0.125 to 8 |
Sampling point | 32k |
Distance uncertainty (m) | plusmn(1 m + 5times10-5times distance + sampling interval) |
Distance scope (km) | 0.3 to180 |
Memory capacity of trace | SD Card (4G), > 10000 pieces |
Duration of measurement | Defined by user; 5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectable |
Optical interface | FC/UPC+SC/UPC+LC/UPC |
Data interface | USB interface, SD card interface |
Visual Fault Locator | Available |
Power supply | Lithium battery; continuing working duration ge 8 hours |
Warranty period | 12 months |
1 , World’s most compact, Lightweight and Fast Design | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 , Stable aerial operation Design | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 , Auto Splice & Auto HeatFunction | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 , Compatible with Fusion Splice-On Connector (FSOC) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 , Tool-less Electrodes replacement | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 , Extended-life electrodes, 5,000 splices (replaceable) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6, 3-Year Extended Warranty Applications:
|
Mini Optical Power Meter + Mini Light Source
TPM-25M Optical Power Meter① Wavelength : 800 ~1700 nm ② Detector : InGaAs ③ Measurement Range : -70~+3 dBm ④ Resolution : 0.01 dBm ⑤ Connector : 2.5mm universal (1.25mm for LC is Optional) ⑥ Power Supply : Alkaline Battery(3 AA 1.5V)
T15MS Optical Light Source
① Wavelength : 1310/1550nm ② Typical Output Power : -5dBm ③ Output Stability : plusmn0.05dB/15mins; plusmn0.1dB/ 8hours ④ Modulation Frequencies : CW,270Hz,1KHz,2KHz ⑤ Connector : SC+ 2.5mm universal (1.25mm for LC is Optional) ⑥ Power Supply : Alkaline Battery(3 AA 1.5V )