Pm1440Bv Metal Lathe, 2" Spindle Bore 2-Axis Dro Installed, Qctp, Variable Speed 3 YEAR WARRANTY!

Unsold See similar items $8,151.75 Buy It Now, $270.41 Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller qualitymachinetools ✉️ (4,935) 98.8%, Location: Pittsburgh, Pennsylvania, US, Ships to: US, CA, Item: 232236028219 PM1440BV METAL LATHE, 2" SPINDLE BORE 2-AXIS DRO INSTALLED, QCTP, VARIABLE SPEED.

This Listing is for a:

BRAND NEW MODEL PM-1440BV METAL WORKING LATHE WITH VARIABLE SPEED, 2" SPINDLE BORE AND 2 -AXIS DIGITAL READOUT INSTALLED!

HERE ARE THE MAIN FEATURES OF THIS LATHE:

  1. Large 2” Spindle Bore clear through spindle, Best in class for larger diameter work that can pass  through the spindle for  much 
    easier setup
  2. Large Morse Taper #4 bore in tail stock, to allow for larger accessories and more gripping power  for those tough drilling  jobs, yet 
    you can just use a reducing sleeve for smaller Morse Taper  accessories
  3. Power feed on Carriage, and Cross Slide, both left and right, and in and out, for both turning and  facing operations with  automatic 
    feed. Allows for the best surface finish in all directions.
  4. Variable Spindle Speeds from 4 0 - 1 8 00 RPM (1440BV Model) with High and Low,  to perfectly match  the speed for the job  for 
    increased cutting tool life and better surface finishes, without stopping  spindle to change speeds
  5. Solid Cast Iron base, for the ultimate in rigidity and vibration dampening
  6. Induction Hardened and Precision Ground Bed Ways to resist wear and give a long service life
  7. All gears and shafts in headstock hardened and precision ground for long life and quiet running
  8. High quality electronics used throughout machine
  9. Slip Clutch on feed rod, to help prevent overloading damage of feeds and allow the use of a solid  carriage stop for  repetitive work
  10. Precision Tapered Roller Bearings used in spindle, for the ultimate in long life, high precision, and  best surface finishes
  11. Inch AND Metric thread cutting ability is a standard feature, with a full range of all common threads
  12. True INCH PITCH main lead screw, cross feed, and compound lead screws  make it easy to use for  the INCH measurement  System, 
    yet still has the Metric readings on dials for the ultimate in  versatility for any job that may come about
  13. Splash oil bath lubrication in Headstock, Thread/Feed Gearbox, and Apron, for efficient lubrication,  and long life,  especially 
    compared to traditional open-non lubricated Thread/Feed Gearbox design,  yet simple and reliable, and does  not require any filter 
    changes or pump maintenance as with oil  pump lubrication systems. Also no risk of losing oil flow to  expensive parts as there can 
    be with  pump lubricated systems
  14. Foot Brake, Coolant System, and Work Light included as standard equipment
  15. Slide out chip tray for easier cleaning                                       

PLUS INCLUDES A 3 YEAR WARRANTY!

Fast delivery times, these machines are IN STOCK here in Pittsburgh, PA and we can ship them right away. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Or pick up at our location in Pittsburgh.

Standard Accessories: 

  • 8" 3 Jaw Chuck
  • 8" 4 Jaw Chuck
  • 10" Face Plate
  • Steady Rest
  • Follow Rest
  • Coolant System
  • Work Light
  • Wedge Type Quick Change Tool Post Set
  • Inch and Metric Threading Capability
  • Cast Iron Base
  • Foot Brake
  • Splash Guard
  • Live Center
  • Drill Chuck w/ Key for Tailstock
  • 2-Axis Digital Readout Installed
  • 3 Year Warranty

Shipping is a flat rate of $249 for this machine to the 48 US States and many areas in Canada (Please ask if this applies to your location.  You would be responsible for clearing customs), or you can pick up at our location and we can load you for free.  If you require liftgate service at delivery (bringing the machine from truck height to ground level) please let us know.  There is no additional cost, but noting it at time of shipping makes the delivery process smoother.

If you would like to stop in and see one in person, we are at 

Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. 

Our Phone # [phone number removed by eBay] 

Parts are easy to come by, we fully support these machines and the machine comes with a 3 year warranty on all parts, so you don't have to worry about that down the road if you need anything. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help.

PM-1440BV Main Specifications 

  • Max. Swing over bed 14” 
  • Max. Swing over cross slide 8.81” 
  • Max. Swing in gap 18.74” 
  • Center Height 7” 
  • Spindle Center Line Distance from Floor Approx. 46” 
  • Max. Distance Between Centers 40” 
  • Spindle Chuck Mount D1-5, Camlock Spindle Face to Tail Stock Spindle Face Max Distance 43-1/4” 
  • Width of Bed 7.362” 
  • Bed Height 11.5” 
  • Spindle Bore 2” 
  • Spindle Taper, Internal MT #6 Spindle Mounting System Camlock, D1-5 
  • Spindle Speeds 40-1800 RPM Variable, 2 Steps 
  • Bed Length 54” 
  • Lead Screw Diameter / Pitch 7/8” / 8 TPI 
  • Feed Rod Diameter 3/4” 
  • Inch Thread Cutting Range 4-56 TPI, 34 Different Threads List of Threads in TPI: 4, 4-1/2, 5, 5-1/2, 6, 6-1/2, 7, 8, 9, 9-1/2, 10, 11, 11-1/2, 12, 13, 14, 16, 18, 19, 20, 22, 23, 24, 26, 28, 32, 36, 38, 40, 44, 46, 48, 52, 56 
  • Metric Thread Cutting Range .4-7mm Pitch Longitudinal Feed Range (Left and Right) 
  • .0006-.0159 Inches Per Revolution Cross Feed Range (In and Out) .0003-.0098 Inches Per Revolution 
  • Spindle Length through headstock, Protruding End to D1-5 Chuck Mounting face Approx. 16-1/2” 
  • Spindle Length through headstock, Protruding End to 3 Jaw Chuck face Approx. 19-1/4” 
  • Max Carriage Travel, Along Bed Ways 36” W/Taper Attachment and Splash Guard Installed 38-1/2” Without Taper Attachment 
  • Cross Slide Travel, With Taper Attachment 6-1/4” 
  • Compound Travel 3-3/4” 
  • Tail Stock Quill Diameter 1.259” 
  • Tail Stock Quill Taper MT #3 
  • Tail Stock Quill Travel 4” 
  • Main Motor Horsepower 2HP 
  • Speed Control Type - 2 Speed Geared Head with VFD on motor 
  • Voltage / Phase/ Amps 220 Volts +/- 10%, 1 Phase / 12 Amps Max. Max. 
  • Dimensions, Assembled (Includes cross slide handles) 51”H x 31”W x 71-1/2”L Foot Print (without Handles Included) 71-1/2”L x 24” Front of chip pan to back of splash guard 
  • Approxomate Machine Weight, With Accessories and Base 1800 LBS

We have these IN STOCK and can ship anywhere in the US that a truck can get to, and we can work out arrangements with you to get this delivered, no problem. You will need to unload at your end, but shipping is no problem. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. We just need to know before shipment.

If you have ANY questions, feel free to give us a call at [phone number removed by eBay] or email us.

For payment we take all types including Paypal, Visa, M/C, AMEX, and Discover.

Check out our other auctions for more lathes and mills.

               Our Part # PM-1440BV w/DRO

  • Condition: New
  • Brand: Precision Matthews
  • MPN: PM-1440BV w/DRO
  • Country/Region of Manufacture: China
  • Model: PM-1440BV w/DRO

PicClick Insights - Pm1440Bv Metal Lathe, 2" Spindle Bore 2-Axis Dro Installed, Qctp, Variable Speed PicClick Exclusive

  •  Popularity - 23 watchers, 0.8 new watchers per day, 30 days for sale on eBay. Super high amount watching. 0 sold, 7 available.
  •  Best Price -
  •  Seller - 4,935+ items sold. 1.2% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive