RGB MCU Adjustable Display Pattern 24 LED VU Level Indicator Meter Dual Channel

Sold See similar items $8.76 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: lu_cytime208 ✉️ (53,602) 0%, Location: 香港, HK, Ships to: WORLDWIDE, Item: 331993839712 RGB MCU Adjustable Display Pattern 24 LED VU Level Indicator Meter Dual Channel.

 

5V RGB MCU Display Pattern Dual Channel 24 LED VU level indicator meter


 
 
 
 Description:
  • Features:


    This three color SMD LED, colorful, color flexible configuration, prefabricated a variety of color scheme, can set a color scheme specific to the color of each point, there are various design can choose, can adjust the brightness, the sensitivity adjustable, can set the infrared remote control self learning convenient control, infrared remote control need to match, only supports theN/E/C, this format is more common, can take home try television, set-top boxes, I get home in nine receiver remote control, remote control, haier TV Tmall magic box remote control and a waste of VCD remote control test can be used, remote control of home electric fans and air conditioning remote control test can't use).

    Size: length: 100 mm width :35 mm thickness :12.5 mm installed two hole center distance : 52 mm ,hole diameter: 3.2 mm (installation note mounting holes around the wiring insulation plus insulation gasket)

    Power supply: DC5v -6 v / 250 mA(Maximum current is LED the whole amount and the highest brightness, generally less than 100 mA)

    Audio signal: pick up the three lines on the headphone jack, respectively is a signal Ground (together with the power of the board negative) )left sound channel, right channel.

    Functional status and buttons operation: K1 and K2 two buttons, press is have short press and long press .
    The following statement didn't explain the long press is said short press
    1, level display status: according to the last time after the power supply power, the brightness of the former, figure, color scheme and sensitivity to normal level.

    This state the button function: K1 / show pattern selection click in a pattern, pattern at the end of the cycle from the very beginning.

    K1 long press/to enter the pattern of color scheme selection state (note: the bottom upward emission pattern buttons on long press to enter the infrared learning state).

    K2 / sensitivity select click change sensitivity level, the order is the highest sensitivity.....The lowest sensitivity > > sensitivity automatically return to the highest sensitivity.

    K2 long press/entered into a state of brightness adjustment.

    2, Brightness adjustment status: the left section 24 of the bright display 8 red 8 green 8 blue, on the right shows the current brightness (red), 3 pieces according to grade 1, Toatl grade 8.

    This state the button functions: K1 / click the higher brightness level, the highest is all bright.

    K1 long press/return level the brightness of the display status and return before entering the set.

    K2 / brightness click on the lower level, the lowest level is the low end of the three led light.

    K2 long press/save the brightness of the set and returns the level display status.

    3, color scheme selection state: left and right sides of each led all bright led displays the current color keep on top of the mode leds (peak said the color of the peak point).
    This state the button functions: K1 / click the show next prefabricated color configuration scheme, the order is a scheme > > the current program, the last a prefabricated scheme > custom solutions (note that custom solutions when the factory is empty, that is, all black, the need to define the color of each dot) > prefabricated plan 1, so cycle.

    K1 long press/to save and select the current scheme return level display state.

    K2 / press with K1 instead choose order.

    K2 long press/to enter a custom color configuration status.

    4, custom color configuration status: left and right side shows a custom color (not after custom shows full red) keep on top of the mode leds (peak said the color of the peak point) on the left side of the low end of the led flashing said the current led is selected.

    This state the button functions: K1 / click on the selected led moving up , the top the most low-end will move to another column.

    K1 long press/color change to the next, change order red, yellow, green, blue, blue, magenta, six colors cycle show.

    K2 / click on the selected led moves down a, the bottom will be moved to another column led one of the most high-end.

    K2 long according to save the current color scheme and returns a color scheme selection state.

    5, infrared learning key state: enter the state of all lights all out K1 and K2 button press any returns level display status

    Need N/E/C of the infrared remote control (the remote control need since with) general TV set-top boxes, such as remote control can try sure no air conditioning, remote control or a lot of N/E/C format, is actually use the four buttons on the remote control to the corresponding board K1 short press and press K2 short press and long according to the four functions.

    Since the learning process: the first is the K1 short according to the corresponding function, with the remote control of the sensor of the board (without getting too close to) press the button, if learn to work on the left will light up six led and into the K1 long according to the corresponding function learning state again press the corresponding K1 long press the remote control button again to add 6 led into the same process in order to learn the K2 short press and K2 long press after the four keys will automatically save and return to the level display status at that time you can use the remote control to control, convenient try?

    If press buttons have no reaction, estimation is infrared remote control code format is not suitable for, can only change the remote control to try again.

     
  • Package Contents
    100% Brand New
    1pc 5V RGB MCU Display Pattern Dual Channel 24 LED VU level indicator meter


 

 
Shipping :
    • We only accept your Paypal Address,Please Make sure it's 100% right.
      The items you ordered will be shipped out in 1 business day by Air Mail when your payment is clear.

      Country

      Delivery Time

      Working Days (not including holiday) 5-7 8-10 11-14 15-19 20-22 >25
      Working Days + Saturday + Sunday 5-9 10-14 15-20 21-25 26-30 >35
      United States Rate (item arrived)     9% 50% 21% 13% 7% Refund or Resend
      United Kingdom Rate (item arrived) 10% 62% 20% 3.5% 4.5% Refund or Resend
      Australia Rate (item arrived) 23% 50% 13% 8% 6% Refund or Resend
      France Rate (item arrived) 1.5% 20.5% 45% 23% 10% Refund or Resend
      Germany Rate (item arrived) 5.5% 25% 35% 19% 15.5% Refund or Resend

      Canada

      Rate (item arrived)

      0.0%

      44 %

      35%

      18%

      3%

      Refund or Resend

      Spain Rate (item arrived) 1.5% 25% 50% 14% 9.5% Refund or Resend
 
Payment : 
  • We accept PayPal Payment only !!!!.
    All major credit cards are accepted through secure payment processor PayPal.
    Payment must be received within 7 days of auction closing.
    If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.

 
Feedback

  • We maintain high standards of excellence  and strive for 100% customer satisfaction!  Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.
    We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.We will try our best to solve any problem.
    If you have any questions, please feel free to contact us by ebay message.
    We will reply you within 48 Hours.
     
 
Refund&Reship:
  • If you are dissatisfied with our item or service, then please follow the good eBay practice to contact us by ebay message before leaving
    any feedback. We are committed to resolve all issues in a friendly and satisfactory manner.
    We always reply to ebay messages within 1-2 business days. If you do not get a response from us, then please check your ebay message. we only reply ebay message, no send email.
    Original and return shipping fee will not be refunded or reimbursed under all circumstances. You must agree and acknowledge this term if you bid for this item. Therefore, please do not complain about having to ship back at your own expense.


    Contact US::

    If have any question, Please contact us by ebay message(no e-mail). Reply within 24hours.
    We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you.
    We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference,
    we may not be able to reply your emails immediately.


Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.

  • Condition: New
  • Brand: Unbranded

PicClick Insights - RGB MCU Adjustable Display Pattern 24 LED VU Level Indicator Meter Dual Channel PicClick Exclusive

  •  Popularity - 9 watchers, 0.0 new watchers per day, 300 days for sale on eBay. Super high amount watching. 16 sold, 10 available.
  •  Best Price -
  •  Seller - 53,602+ items sold. 0% negative feedback. Good seller with good positive feedback and good amount of ratings.

People Also Loved PicClick Exclusive