We Can Customize Your Unique Sword Blade Struture/ Length / Sori / Hamon Type / Kissaki Type / Engraving / Fittings
Please Click Here!!!
ABOUT THE SWORD:
Fully functional and fully battle ready. The accessories of the sword are all authentic. It is made of folded steel, designed by our experienced swordsmith with perfect craftmanship of differential hardening to creat a high-performance blade for real battle. The sword is really cost-effective, functional and will be your best choice to show to your friends or keep it as a collection. Also, it is very suitable for training or display for its special differential hardening and exquisite craftsmanship of forging process.
SPES:
Overall Length: | 40.9 inch 104cm | Blade Material: | Folded steel |
Nagasa Length: | 28.7 inch 73cm | Saya Material: | High quality hard wood + buffalo horn |
Handle Length: | 10.6 inch 27cm | Handle Material: | Genuine Ray skin + Hard wood |
Kissaki Length: | 1.77 inch 4.5cm | Tsuba Material: | Alloy Tsuba Set |
Blade Width(near Habaki): | 1.26 inch 3.2cm | Weight (without Saya): | 0.85kg (approximately) |
Blade Width(near Kissaki): | 0.91 inch 2.3cm | Weight (with Saya ): | 1.17kg (approximately) |
Kissaki Shape: | CHU-KISSAKI | Package Weight: | 1.5kg (approximately) |
Blade Shape: | SHINOGI-ZUKURI | Condition: | Brand new |
SWORD P ICTURES
CUSTOMIZATION SERVICES: (You can choose the following sword fittings to replace the original ones!)
Reference Diagram:
Habaki: You Can choose the Following Habakis to replace This Sword's Original Habaki #01-#03 free for choosing , #4 cost $5, #05- #07 cost $15, #08-#11 cost $25, #12 cost $25
Seppa: You Can choose the Following seppa to replace This Sword's Original seppa Free for choosing
Iron Tsuba: You Can choose the Following Iron Tsuba to replace This Sword's Original Tsuba #001-#060 cost $10, #061-#075 cost $20
Fuchi/Kashira: You Can choose the Following Fuchi/Kashira to replace This Sword's Original ones #001-#005 cost $10, #006-#018 free for choosing, #019-#021 cost $10
Menuki: You Can choose the Following Menuki to replace This Sword's Original Menuki Free for choosing
Copper Koshirae Set : You Can choose the Following Copper Koshirae Set to replace This Sword's Original ones Extra $45 for choosing
Genuie Rayskin: You Can choose the Following Genuie Rayskin to replace This Sword's Original Genuie Rayskin Free for choosing
Tsuka-ito&Sageo: You Can choose the Following ito to replace This Sword's Original ito Free for choosing
L eather Tsuka-ito : You Can choose the Following leather ito to replace This Sword's Original ito Free for choosing
Tsuka-Maki: You Can choose the Following Tsuka-Maki to replace This Sword's Original Tsuka-Maki Free for choosing
High-Class S AGEO: You Can choose the Following Sageo to replace This Sword's Original Tsuba Sageo Extra $10 for the choosing
Sheath(Saya) : You Can choose the Following Saya to replace This Sword's Original Saya Free for the choosing High-Class Saya : You Can choose the Following High-Class Saya to replace This Sword's Original saya
E NGRAVING S ERVICES
1. <1>TANREN: FORGING <2>TSURIKOMI AND SUNOBE: FORMING THE BLANK The balde was made of folded steel, it was Fully hand forged in a completely traditional manner. AISI 1060 High carbon steel and 1095 high carbon steel were smelted and pounded to fold 13 times to creat 8192 layers, Not only can remove the remain impurities of the carbon steel and better distribute the carbon to form the blank, But also allow the layers to bend at rates that differ very,very slightly when lateral (sideways) stress is placed upon the blade. Layering the steel creats resilience (toughness) that makes each par of the blade more likely to bend, and spring back,but not broken. The obvious undulating texture on the balde was resulted from folded repeatedly during forging.
2. <1>HIZUKURI: FULLY SHAPING THE BLADE <2>ARA-SHIAGE: ROUGH FINISHING <3>YAKI-IRE: HEAT TREATING The blade would be fully hand shaping, and then heat treating after grinding (rough finishing), then quickly oil and water quenching (tempering) to greatly improve the hardness and flexiblity of the balde. This way allow the layers to cool at different rates during the tempering process, The faster steel cools,the harder it becomes; this is a product of the carbon that is mixed with the steel. The slower steel cools,the softer it remains. This creats a nature mix of hardness and flexibility. 3. <1>SHIAGE: FINISHING THE BLADE <2>HI AND HORIMONO: GROOVES AND ENGRAVINGS Hand shaping the balde after the second time polished (Finishing the blade), And two long Hi (blood groove) were made on each side of the blade to create a lighter blade while swung and balance it to achive an optimal performance. Meanwhile, engraving services will be implemented in this step. (pls contact us through ebay message if you have something engrave or no Bo-hi needed on the blade.)
4. NAKAGO AND MEIKIRI: FILING AND SIGNING THE TANG This blade comes with a full length Tang which greatly enhances the strength of the sword while swung. The tang will be filed to match well with the handle, and it will be signed according to your requirements. (pls contact us through ebay message if you want to sign the DATE or NAME on the Tang.)
5. TOGI:SWORD POLISHING Fully hand polished by our experience swordsmith with more than 15 process hand sharpening work by the multiple grade abrasive stone in the most traditional Japanese craftmanship way. Making a mirror-like surface. The point of the blade is medium length. NOTICE: A free&random sword bag comes with the sword. The display stand in the sword pictures is NOT include. Due to All of our products are full handmade, So it varies a little from sword to sword.
We will do whatever we can do to serve for you, feel free to contact us if any questions,thanks very much!!!
无标题文档 无标题文档 无标题文档 无标题文档 无标题文档 无标题文档 无标题文档