Buy recommendations:
Solenoid valve :V Series, DV Series
Longer service life and more power saving. Quite suitable for use in such as greenhouses or spray system and other frequent watering environments.
Ball vale :L Series, S Series, T Series
Can operate at ZERO water pressure. Suitable for use in rain barrels
Connector Specifications:
US : 3/4 Inch
Europe : G 3/4 (26.5mm)
***:1.Does not include faucets and connecting pipes inside the picture
*** : 2.Our every product can be used in 0-120psi pressure or close to 0 psi pressure
*** : 3. To avoid the loss of goods, please provide the recipient's phone number,
*** to facilitate contact when the postman to send goods.
We are the manufacturer.
Here you can buy cheap and high quality water timer, for your own use.
Also welcome as a dealer. Sell this product. If want to be a dealer, please contact me.
Greneds Electronic Water Timer
(Item: S1201, S1202, S1203)
1. 1 2 watering frequency options ( 5 ,10 ,15 ,30 mins, 1, 2, 4, 8, 12, hours, 1, 2, 3 days)
2. 1 2 watering duration options (off, on, 15, 30 sec 1, 3, 5, 10, 15, 20, 30, 60 min )
3. Save energy, solar-powered operation, and environment-friendly product for solar version. (S1201, S1202)
4. Rain stop feature.Timer will stop working when it is raining. (S1201)
5. Low battery indicator.
6. AA (1.2V) rechargeable batteries or 2 AA 1.5V batteries required (not included),
WE have 12 Type on ebay USA ( search for water timer )
L01 : 2 Mode LCD Electronic Water Timer + Solar + Rain Stop function
L02 : 2 Mode LCD Electronic Water Timer + Solar
L03 : 2 Mode LCD Electronic Water Timer
PS: EL series = T Series + LCD display + RunOnce function
EL01: EASY LCD Electronic Water Timer + Solar +Rain Stop Function
EL02: EASY LCD Electronic Water Timer + Solar
EL03: EASY LCD Electronic Water Timer
T01 : Easy Electronic Water Timer + Solar + Rain Stop function
T02 : Easy Electronic Water Timer + Solar
T03 : Easy Electronic Water Timer
S1201 : Easy Electronic Water Timer +Solar + Rain Stop Function
S1202 : Easy Electronic Water Timer + Solar
S1203 : Easy Electronic Water Timer
Instructions
◎ Installation
1. The timer must be a fixed installation.
2. The faucet connection should be towards the top. Screw connection up by hand. Do not over tighten or use a wrench to avoid nut breaking.
3. The flow direction must be from top to bottom, otherwise the timer will be leaking, seriously can lead to timer failure.
4. Always keep transparent cover closed to prevent dirt and water from entering and incorrect operation.
◎ Battery installation
1. Open the transparent cover.
2. pull the battery compartment out of the timer.
3. For S1201 and S1202, place cloth or use your hand to cover the solar panel before you install two full 1.2V~1.5V Ni-MH rechargeable batteries. (The batteries must be fully 2.4V at least for the first time use; otherwise, timer will not work.);
For S1203, please use two alkaline batteries which voltage is higher than 2.4V.
4. Place the battery compartment back in the timer and screw it, after you insert the batteries. Then close the cover fully.
‧ When the battery voltage is below a safe operating voltage, the indicator will appear red light and the valve will be closed. When batteries are broken, please replace two 1.2V~1.5V rechargeable batteries for S01 and S02 or two 1.5V alkaline batteries for S03.
◎ Set the watering interval
Turn the frequency dial to the desired watering frequency. The frequency dial has 12 settings:
‧ 5 ,10 ,15 ,30 mins – water will come on every 5 ,10 ,15 ,30 minutes.
‧ 1 ,2 ,4 ,8 ,12 hr – water will come on every 1 ,2 ,4 ,8 ,12 hour.
‧ Daily - the water will come on once every day.
‧ 2 ,3 day – the water will come on every 2n d ,3rd day.
Note:
* When the batteries installation is done, the valve will be turned on and off one time automatically right away. It means the timer works with no problem.
**The water will not come on until after the first complete interval. For example, if the timer is programmed at 1 pm, and the interval dial is set to come on every four hours. At 5 pm, the valve will open.
If immediate watering is needed, then a manual watering interval may be started.
*** Timer will not work when the duration is the same or longer than the frequency. For example, the timer will think this is meaningless setting if you set up timer to work 30 mins every 10 mins.
◎ Set the watering duration
Program your timer before connecting to the tap. Rotate the Duration Dial to the desired watering duration. The Duration dial has 12 settings:
‧ OFF – the valve will close and remain closed when the dial is in this setting.
‧ ON – the valve will open and remain open when the dial is in this setting.
‧ 15, 30 sec 1, 3, 5, 10, 15, 20, 30, 60 min - the water will come on automatically at the intervals shown by the frequency dial and remain on for the chosen duration .
To change the watering duration while the valve is open simply rotates the dial to the new duration. The valve will close first and open again for the duration shown on the duration dial regardless of how long the valve had been open prior to the change.
◎ Rain stop function (For S1201)
There are a water collecting area on top. you must put timer on outdoors. timer will stop immediately when raining, and it will not work until next running time after water collecting area is dry
◎ Watering interval delay feature
Pressing the interval delay switch one time is one hour delay. For example: you set up the timer at 1 pm, and it will work for 10 minutes every 1 hour. Then you want it to start 3 hours later, please press the delay switch three times. Then the timer will start at 5:00 pm.