Up for your consideration is a vintage 1970's Pioneer Stereo Amplifier Model Sa-500a. This classic unit has been serviced and works great, No static and all the lights and switches work as they should. Very clean also with minimal wear(Check pics). Just a cool looking compact piece that would look great in your vintage stereo setup. What you see in the pics is what you will receive. I will package your item with upmost respect so it gets to your door fast and safe. Buy with confidence! Please message me with any questions you might have. Thxs!
Music Power Output 44 watts at 4ohm and 36 watts at 8ohms
Continuous Power Output (each channel driven): 16 watts/16 watts at 4Ω; 13 watts/13 watts at 8Ω
Continuous Power Output (Both Channel Driven): 12 watts + 12 watts at 4Ω; 10 watts + 10 watts at 8Ω
Harmonic Distortion: Less than 0,5% (continuous power output)
IM Distortion: Less than 0,7% (continuous power output)
Power Bandwidth (IHF): 20 to 40,000 Hz (8Ω, 0,5% THD)
Frequency Response (Aux): 30 to 50,000 Hz +1 dB -2 dB
Input Sensitivity/Impedance (1kHz for rated output):
Phono 1 Mag : 2,5 mV/50 kΩ
Phono 2 Mag : 2,5 mV/50 kΩ
Tuner : 200 mV/100 kΩ
Aux 1, 2 : 200 mV/100 kΩ
Tape Monitor 1, 2 : 200 mV/100 kΩ
Recording Output:
Tape Rec 1, 2 (pin jack) : 200 mV
Tape Rec (DIN connector) : 30 mV
Controls:
Bass : -11 dB, +12 dB ( at 100 Hz)
Treble : -10 dB, +9,5 dB (at 10 kHz)
Loudness Contour : +10 dB/100 Hz; +5,5 dB/10kHz (with volume control set at -40 dB)
Phono Equalization Curve: RIAA standard
Hum and Noise (IHF):
Phono : more than 75 dB
Tuner, Aux : more than 90 dB
Channel Separation (IHF):
Phono : more than 50 dB
Tuner, Aux : more than 55 dB
Speaker Impedance : 4 Ω to 16 Ω
Damping factor: 40 (8Ω, 1kHz)
Power Requirements: 110, 120, 130, 220, 240 V AC, 50/60 Hz
Power Consumption: 75 watts Max
Dimensions (W x H x D): 330 x 118 x 316 mm ( 13" x 4-5/8" x 12-7/16")
Weight: 5,5 kg (12 lb 2 oz ) net
Free Expedited Shipping!!
Fast N Free!!