See Details on eBay Watch Contact

Vtg 60s CROUSE HINDS explosion proof industrial pendant light - RESTORED REWIRED

CAD 171.09 Buy It Now 2d, CAD 17.34 Shipping, 30-Day Returns

Seller: industrial-antiquities (804) 100%, Location: Urbandale, Iowa, Ships to: US & many other countries, Item: 201585684341 Here's a 1960s-vintage explosion proof light with cast-aluminum housing, prismatic glass globe, and cast-aluminum cage in pristine condition. It has been completely refurbished, rewired, and tested. Its completely original except for its gasket (where the housing meets the globe) which has been replaced with a new and completely safe cork/nitrile rubber gasket. We've paired it with a vintage Appleton swiveling ceiling hanger and 6"-long, 1/2"-diameter iron pipe. With that pipe the fixture measures 16" long from the ceiling hanger to the tip of the cage. The fixture alone (not including pipe and ceiling hanger) measures 9" long and 5.5" in diameter at its widest point. You can, of course, easily substitute a shorter or longer 1/2" iron pipe (available at any hardware store) to decrease or increase how far the fixture hangs down. The fixture's porcelain socket accepts any regular household medium-base bulb (incandescent, CFL, or LED). We've included 3' of new wiring to give you plenty of flexibility should you decide to lengthen the iron pipe. This fixture could easily have another 50 years of service in it! At Industrial Antiquities we guarantee your complete satisfaction because each light is: *Completely disassembled and thoroughly cleaned. Before you buy any light, make sure it has been disassembled, cleaned, and refurbished. We've taken apart thousands of them, and believe us, when you buy them "as is" you will find many of them nearly impossible to take apart, with unsafe and inoperable parts.*Refurbished to the highest standards. Each light-fixture component, down to the tiniest fastener, is inspected and then thoroughly refurbished. Threaded parts are "chased" and lubricated as necessary to ensure everything fits snugly and precisely as it should. We try to keep fixtures as original as possible, but we don't hesitate to replace fasteners, gaskets, and other internal components as necessary, always using parts of equal or better quality than the originals. Though these old lights were generally built to a level of quality unmatched in today's world of imported light fixtures, we'll occasionally run across rusty steel screws and other fasteners that are better replaced with stainless steel or brass fasteners. If we replace any major components we always mention that in the description. Metal housings are treated in a way to restore their former glory while preserving their vintage look, then treated with a no-film corrosion inhibitor. Every fixture is different and requires a customized course of treatment, but rest assured that the fixture you are buying has been professionally restored in every way to ensure many more years of enjoyment and safe, reliable operation.*Guaranteed to work. We typically rewire each fixture with copper wire of a gauge sized appropriately for any type of light bulb intended for the fixture, including incandescent, CFL, and LED. We include extra-long wires so that you have flexibility in mounting the fixture using a longer (or shorter) pipe than we supply. Iron pipes are readily available and inexpensive to purchase, but expensive to ship due to weight, so we just think it makes sense for you to purchase those on your end rather than supply longer lengths with each light. And, of course, we test each fixture to make sure it's in perfect working order.*Accurately photographed and described. Check our outstanding feedback and know that these lights are clearly photographed, from all angles, in sharp detail, so you can see exactly what you're buying. Our descriptions are honest, accurate, and detailed. If you require any more photos or information, don't hesitate to contact us and we'll get back to you quickly.*Ready to hang. Anyone with a modicum of electrical skills can hang a light fixture, but we recommend an electrician do the job.*Carefully packaged. We generously pad our light fixtures in accordance with the standards established by our major shippers (FedEx, UPS, and USPS), and use sturdy boxes, often double boxing if necessary. Though these lights have prices assigned to them, in many ways we consider them "priceless" because of their rarity, beauty, and the fact that you simply cannot buy a comparable modern-day replacement -- and we keep that front of mind in thoughtfully packing every fixture. We typically ship within 24 hours of payment. Most light fixtures are slightly disassembled for safe and economical shipping -- an easy reassembly on your end. We combine shipping to save you money when buying more than one fixture.*Guaranteed to please. We can't remember the last time a customer was unhappy, but if you don't like your fixture for any reason, simply return it for a full refund. FREE shipping to the lower 48 states. Thanks for looking. FOR MORE ABOUT US AS WELL AS INTERESTING INFO ABOUT INDUSTRIAL LIGHTING CHECK US OUT ON FACEBOOK! Condition: Completely refurbished, tested, and guaranteed to work perfectly. New wiring. Socket is in perfect working condition. All parts, including glass, are undamaged. All of Its gasket was replaced with a new nitrile/rubber gasket. The fixture has been completely disassembled down to the tiniest component, thoroughly cleaned, and inspected., Maker: Crouse-Hinds

PicClick Insights PicClick Exclusive

  •  Price -
  •  Popularity - 356 Views, N/A Watching, High amount of views. 0 sold, 1 available.
  •  Seller - Top-Rated Seller! Ships on time with tracking, 0 problems with past sales, over 50 items sold, eBay account active for over 90 days.

People Also Loved