4~20mA PLC Signal Generator Current Transducer Test Two Wire Output

$11.78 Buy It Now or Best Offer, $1.69 Shipping, 60-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller cayin35 ✉️ (135,533) 99.8%, Location: 深圳, 廣東省, CN, Ships to: WORLDWIDE, US, NZ, Item: 194069359838 4~20mA PLC Signal Generator Current Transducer Test Two Wire Output. 4~20mA PLC Signal Generator Current Transducer Test Two Wire Output Description:
1. LCD (with backlight);
2. 9 programmable output (can simulate the actual environment of dynamic testing, each section can be set up t running time /A current /b current);
3. digital rotary encoder adjustment (the use of potentiometer, easily affected by temperature and humidity, the resistance value will change);
4. can be connected to the positive and negative (two-wire system, no matter how wiring, can work, will not burn meter);
5. high precision, good linearity (display accuracy of "0.05" of the decimal point, the actual output accuracy of + 0.5%) (two);
6. imported chips, ultra-low power consumption, no heat, more stable output;
7. the shell is beautiful and easy to install;

System operation:
The working mode of the signal generator is two: 1, manual adjustment mode; 2, dynamic output mode;
Manual mode adjustment output current: rotary encoder knob, clockwise current increase, counter clockwise current decreases;
The manual mode saves the output value, short press encoder knob, after the opening, the screen shows "...", saved successfully, output the next boot is the value stored value; when debugging equipment, we need to adjust the random output values, as long as you don't press the encoder knob after reboot or the original save this value;
Dynamic output mode: is a programmable set of good curve continuous automatic output;
Parameter setting: press the encoder knob, after 5 seconds, enter the set state, the first parameter "model": the screen FUNX X said the number of segments in the curve, the rotary encoder knob to adjust the value of X, X=0 said there is no curve in manual mode, X>0 uses dynamic output mode;
After adjusting the first parameter "mode of operation", press the encoder knob again. If X=0, exit the setting mode and enter the manual mode. If X>0, then enter the first curve;
Each curve is provided with 3 parameters, "tXXX" running time "AXXX" "bXXX" to end the current starting current, so enter the first curve set, the screen shows "t1XX", the rotary encoder knob to adjust the value of XX, the running time adjustment range 1--99 seconds;
Then click the encoder knob into the first curve of the "start current" settings, the screen shows "A1XX", the current setting range 3-21 mA;
Then click the encoder knob to enter the first curve of the "end of the current" settings, the screen shows "b1XX", the current setting range 3-21 mA;
Second curves and so on, until set the number of the end of the set, automatically exit the set state.
If the next time just need to change one of the parameters, the parameters remain unchanged, then set the length of the encoder button for 5 seconds can be set directly out of the state.

  Package Include:
1 x 4-20mA PLC signal generator Payment Mathord

1. PayPal payment accepted only.

2. Items will be shipped to your eBay address. Please make sure it is correct.

3. Payment must be received 4 days after auction ended.

Returns Policy

1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.

2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer. 

3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.

4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response. 

About Feedback

When you satisfied with our product and services please leave us positive feedback.

If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay. 


On 27-Apr-21 at 08:35:46 BST, seller added the following information:


On 27-Apr-21 at 08:37:05 BST, seller added the following information:

  • Condition: New
  • Brand: Unbranded/Generic

PicClick Insights - 4~20mA PLC Signal Generator Current Transducer Test Two Wire Output PicClick Exclusive

  •  Popularity - 5 watchers, 0.0 new watchers per day, 1,068 days for sale on eBay. Super high amount watching. 175 sold, 10 available.
  •  Best Price -
  •  Seller - 135,533+ items sold. 0.2% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive