4mm Shank 0.6mm x 10mm Solid Carbide Uncoated 2 Flute Square End Mill Cutter

$17.51 Buy It Now or Best Offer, $8.12 Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller buonshopping ✉️ (203,561) 98.9%, Location: China, CN, Ships to: WORLDWIDE, Item: 354086785068 4mm Shank 0.6mm x 10mm Solid Carbide Uncoated 2 Flute Square End Mill Cutter. DocumentSpecifications:Cutting Diameter: 0.6mm / 0.024"Effective Cutting Length: 10mm / 0.39"Cutting Edge Length: 2mm / 0.08"Shank Diameter: 4mm / 0.16"Overall Length: 50mm / 2"Material: Tungsten CarbideFinish: UncoatedCutting Hardness: HRC55End Cut Type: Square EndPackage Content: 1pcs x Square Nose End MillDescriptions:Made of fine grain carbide, it has high hardness (HRC90), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. The passivation treatment greatly increases corrosion resistance and wear resistance.Suitable for cutting materials with hardness below HRC55, such as aluminum, aluminum alloy, copper, magnesium alloy, etc.. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas. Used for groove machining, side milling and finishing.Features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. Features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications. Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. Universal chamfered round shank for easier clamping and stable cutting process.The longer the length of the tool clamped by the chuck, the better.Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
  • 4mm Shank 2mm x 10mm Titanium Coated Solid Carbide 2 Flutes Square End Mill USD 11.47
  • 3mm x 25mm x 4mm x 75mm AlTiSin Coated Solid Carbide 4 Flute Square End Mill USD 14.43
  • 1.5mm x 10mm x 4mm x 50mm AlTiSin Coated Carbide 4 Flute Square End Mill 2pcs USD 16.02
  • 16mm Dia 16mm Straight Shank Carbide Tip 3 Flutes Square Nose End Mill USD 13.91
  • 10mm Dia 10mm Straight Shank Carbide Tip 3 Flutes Square Nose End Mill USD 8.43
  • 15mm Dia MT2 Morse Taper Shank P35 Carbide Tip 3 Flutes Square Nose End Mill USD 19.89

    4mm Shank 0.6mm x 10mm Solid Carbide Uncoated 2 Flute Square End Mill Cutter Specifications:
    • Cutting Diameter: 0.6mm / 0.024"
    • Effective Cutting Length: 10mm / 0.39"
    • Cutting Edge Length: 2mm / 0.08"
    • Shank Diameter: 4mm / 0.16"
    • Overall Length: 50mm / 2"
    • Material: Tungsten Carbide
    • Finish: Uncoated
    • Cutting Hardness: HRC55
    • End Cut Type: Square End
    • Package Content: 1pcs x Square Nose End Mill
    Descriptions:
    1. Made of fine grain carbide, it has high hardness (HRC90), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. The passivation treatment greatly increases corrosion resistance and wear resistance.
    2. Suitable for cutting materials with hardness below HRC55, such as aluminum, aluminum alloy, copper, magnesium alloy, etc.. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas. Used for groove machining, side milling and finishing.
    3. Features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. Features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
    4.  Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. Universal chamfered round shank for easier clamping and stable cutting process.The longer the length of the tool clamped by the chuck, the better.
    5. Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
    Hot Item
    • 1/8" Shank 3mm x 12mm Diamond Film Coated Carbide End Mill Router Bits 10pcs USD 26.11
    • 1.5mm x 4mm 7 Degree Angle TiSiN Coated Carbide Tapered Ball Nose End Mill USD 13.6
    • 1/8" Shank 0.7mm x 5.5mm Diamond Film Coated Carbide End Mill Router Bits 10pcs USD 20.97
    • 6mm Dia 6mm Shank 75mm Long HRC55 Carbide AlTiN Coated 4 Flute Square End Mill USD 16.03
    • 2.5mm Dia 4mm Shank HRC45 Carbide AlTiN Coated 4 Flute Square Nose End Mill 2pcs USD 11.47
    Payment
    • We accept eBay payment.
    • Please do not email us to ask for other payment option.
    • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
    Shipping
    • Usually we ship your order out within 24 hours in business day.
    • For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
    • Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
    Return Policy
    • Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
    • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
    About Us
    • We are continually expanding our product selection to better serve your need.
    • We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
    • If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
    Description Policy

      4mm Shank 0.6mm x 10mm Solid Carbide Uncoated 2 Flute Square End Mill Cutter Specifications:
      • Cutting Diameter: 0.6mm / 0.024"
      • Effective Cutting Length: 10mm / 0.39"
      • Cutting Edge Length: 2mm / 0.08"
      • Shank Diameter: 4mm / 0.16"
      • Overall Length: 50mm / 2"
      • Material: Tungsten Carbide
      • Finish: Uncoated
      • Cutting Hardness: HRC55
      • End Cut Type: Square End
      • Package Content: 1pcs x Square Nose End Mill
      Descriptions:
      1. Made of fine grain carbide, it has high hardness (HRC90), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. The passivation treatment greatly increases corrosion resistance and wear resistance.
      2. Suitable for cutting materials with hardness below HRC55, such as aluminum, aluminum alloy, copper, magnesium alloy, etc.. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas. Used for groove machining, side milling and finishing.
      3. Features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. Features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
      4.  Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. Universal chamfered round shank for easier clamping and stable cutting process.The longer the length of the tool clamped by the chuck, the better.
      5. Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
      • 4mm Shank 2mm x 10mm Titanium Coated Solid Carbide 2 Flutes Square End Mill USD 11.47
      • 3mm x 25mm x 4mm x 75mm AlTiSin Coated Solid Carbide 4 Flute Square End Mill USD 14.43
      • 1.5mm x 10mm x 4mm x 50mm AlTiSin Coated Carbide 4 Flute Square End Mill 2pcs USD 16.02
      • 16mm Dia 16mm Straight Shank Carbide Tip 3 Flutes Square Nose End Mill USD 13.91
      • 10mm Dia 10mm Straight Shank Carbide Tip 3 Flutes Square Nose End Mill USD 8.43
      • 15mm Dia MT2 Morse Taper Shank P35 Carbide Tip 3 Flutes Square Nose End Mill USD 19.89
      Hot Item
      • 1/8" Shank 3mm x 12mm Diamond Film Coated Carbide End Mill Router Bits 10pcs USD 26.11
      • 1.5mm x 4mm 7 Degree Angle TiSiN Coated Carbide Tapered Ball Nose End Mill USD 13.6
      • 1/8" Shank 0.7mm x 5.5mm Diamond Film Coated Carbide End Mill Router Bits 10pcs USD 20.97
      • 6mm Dia 6mm Shank 75mm Long HRC55 Carbide AlTiN Coated 4 Flute Square End Mill USD 16.03
      • 2.5mm Dia 4mm Shank HRC45 Carbide AlTiN Coated 4 Flute Square Nose End Mill 2pcs USD 11.47
      Payment
      • We accept eBay payment.
      • Please do not email us to ask for other payment option.
      • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
      Shipping
      • Usually we ship your order out within 24 hours in business day.
      • For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
      • Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
      Return Policy
      • Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
      • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
      About Us
      • We are continually expanding our product selection to better serve your need.
      • We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
      • If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
      • Condition: New
      • Brand: uxcell
      • End Mill Type: Routing End Mill
      • Number Of Flutes: 2
      • Shank Diameter: 0.16 in
      • Overall Length: 2 in
      • End Type: Square End
      • UPC: 745065261064

      PicClick Insights - 4mm Shank 0.6mm x 10mm Solid Carbide Uncoated 2 Flute Square End Mill Cutter PicClick Exclusive

      •  Popularity - 0 watchers, 0.0 new watchers per day, 668 days for sale on eBay. 0 sold, 1 available.
      •  Best Price -
      •  Seller - 203,561+ items sold. 1.1% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

      People Also Loved PicClick Exclusive