Seller: costcocity003✉️(192,622)97.8%,
Location:China, CN,
Ships to: WORLDWIDE,
Item:3045095103834mm Shank 0.8mm x 10mm Solid Carbide Uncoated 2 Flute Square End Mill Cutter. DocumentSpecifications:Cutting Diameter: 0.8mm / 0.031"Effective Cutting Length: 10mm / 0.39"Cutting Edge Length: 2.5mm / 0.1"Shank Diameter: 4mm / 0.16"Overall Length: 50mm / 2"Material: Tungsten CarbideFinish: UncoatedCutting Hardness: HRC55End Cut Type: Square EndPackage Content: 1pcs x Square Nose End MillDescriptions:Made of fine grain carbide, it has high hardness (HRC90), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. The passivation treatment greatly increases corrosion resistance and wear resistance.Suitable for cutting materials with hardness below HRC55, such as aluminum, aluminum alloy, copper, magnesium alloy, etc.. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas. Used for groove machining, side milling and finishing.Features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. Features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications. Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. Universal chamfered round shank for easier clamping and stable cutting process.The longer the length of the tool clamped by the chuck, the better.Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
1/8" Shank 2mm x 12mm Diamond Film Coated Carbide End Mill Router Bits 10pcs AUD 31.12
1/8" Shank 3.175mm x 12mm Titanium Coated Carbide End Mill CNC Router Bits 4pcs AUD 18.24
12mm Dia 12mm Straight Shank Carbide Tip 3 Flutes Square Nose End Mill AUD 14.11
1/8" Shank 0.5mm x 4mm Diamond Film Coated Carbide End Mill Router Bits 10pcs AUD 25.86
1/8" Shank 1.6mm x 8.5mm Diamond Film Coated Carbide End Mill Router Bits 10pcs AUD 25.42
PAYMENT SHIPPING RETURNS
We accept eBay payment.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended..
International Buyers - Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Note that delivery times may vary, particularly during peak periods or inclimate weather conditions.
All items will be dispatched from our warehouse in China or Hong Kong directly.
We will ship worldwide EXCEPT Italy, Nigeria, Vietnam, India, Indonesia, Malaysia, Philippines, Thailand, India, China, Hong Kong, Macau Due to Custom restrictions, we do not ship lighters to US We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery.
All our items will be shipped to buyer's PayPal address, please confirm your address on PayPal before you bid.
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
Buyers are responsible for the return shipping costs under any circumstances.
Description Policy
4mm Shank 0.8mm x 10mm Solid Carbide Uncoated 2 Flute Square End Mill Cutter Specifications:
Cutting Diameter: 0.8mm / 0.031"
Effective Cutting Length: 10mm / 0.39"
Cutting Edge Length: 2.5mm / 0.1"
Shank Diameter: 4mm / 0.16"
Overall Length: 50mm / 2"
Material: Tungsten Carbide
Finish: Uncoated
Cutting Hardness: HRC55
End Cut Type: Square End
Package Content: 1pcs x Square Nose End Mill
Descriptions:
Made of fine grain carbide, it has high hardness (HRC90), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. The passivation treatment greatly increases corrosion resistance and wear resistance.
Suitable for cutting materials with hardness below HRC55, such as aluminum, aluminum alloy, copper, magnesium alloy, etc.. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas. Used for groove machining, side milling and finishing.
Features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. Features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. Universal chamfered round shank for easier clamping and stable cutting process.The longer the length of the tool clamped by the chuck, the better.
Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
Item Specifics
Brand
uxcell
End Mill Type
Routing End Mill
MPN
Does Not Apply
Number Of Flutes
2
Shank Diameter
0.16 in
Overall Length
2 in
End Type
Square End
upc
745065261149
1/8" Shank 2mm x 12mm Diamond Film Coated Carbide End Mill Router Bits 10pcs AUD 31.12
1/8" Shank 3.175mm x 12mm Titanium Coated Carbide End Mill CNC Router Bits 4pcs AUD 18.24
12mm Dia 12mm Straight Shank Carbide Tip 3 Flutes Square Nose End Mill AUD 14.11
1/8" Shank 0.5mm x 4mm Diamond Film Coated Carbide End Mill Router Bits 10pcs AUD 25.86
1/8" Shank 1.6mm x 8.5mm Diamond Film Coated Carbide End Mill Router Bits 10pcs AUD 25.42
PAYMENT
We accept eBay payment.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended..
SHIPPING
International Buyers - Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Note that delivery times may vary, particularly during peak periods or inclimate weather conditions.
All items will be dispatched from our warehouse in China or Hong Kong directly.
We will ship worldwide EXCEPT Italy, Nigeria, Vietnam, India, Indonesia, Malaysia, Philippines, Thailand, India, China, Hong Kong, Macau Due to Custom restrictions, we do not ship lighters to US We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery.
All our items will be shipped to buyer's PayPal address, please confirm your address on PayPal before you bid.
RETURNS
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
Buyers are responsible for the return shipping costs under any circumstances.
Condition:New
Brand:uxcell
End Mill Type:Routing End Mill
Number Of Flutes:2
Shank Diameter:0.16 in
Overall Length:2 in
End Type:Square End
UPC:745065261149
PicClick Insights - 4mm Shank 0.8mm x 10mm Solid Carbide Uncoated 2 Flute Square End Mill Cutter PicClick Exclusive
Popularity - 0 watchers, 0.0 new watchers per day, 668 days for sale on eBay. 0 sold, 2 available.
Popularity - 4mm Shank 0.8mm x 10mm Solid Carbide Uncoated 2 Flute Square End Mill Cutter
0 watchers, 0.0 new watchers per day, 668 days for sale on eBay. 0 sold, 2 available.
Best Price -
Price - 4mm Shank 0.8mm x 10mm Solid Carbide Uncoated 2 Flute Square End Mill Cutter
Seller - 192,622+ items sold. 2.2% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.
Seller - 4mm Shank 0.8mm x 10mm Solid Carbide Uncoated 2 Flute Square End Mill Cutter
192,622+ items sold. 2.2% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.