Din Rail Solide state relay
Input 3~36V DC
Output 10~36VDC
quintuplicate output
Rate current 5A
Type | Standard type | Isolation type | |
Model | ST5-5DDK | ST5-5DDG | PN5-10DA |
Rated load current | 5A | 5A | 10A |
Input Data | |||
Input voltage | 3~36VDC | 3~32VDC | |
Min. ON/OFF Voltage | ON>4V. OFF<1.0V | ON>2.4V. OFF<1.0V | |
Trigger current | 7.5mA/12V | 4mA/12V | |
Output Data | |||
Operating Voltage | 10~36VDC | 5~36VDC | 24~380VAC |
Voltage Drop | 1.6V/25°c | ||
Leakage Current | 0.8mA | 0.7mA | |
Response Time | < 1ms | ON<10ms, OFF<10ms | |
Dielectric Strength | Over 2.5KVAC/1min. | ||
Isolation Strength | Over 50M/500VDC | ||
Operation Temperature | _20°c ~ +80°c | ||
Housing Material | Intensive ABS | ||
Weight | 65g | 85g | |
Installation | Din rail installation |
This product is a semi-isolated, product inputs have optocoupler isolation to ensure the safety and reliability of the control signal, and improve equipment compatibility of the input signal can be able to adapt to a variety of control signals (SCM; PLC; various types of sensors, etc. ), the control current of only 5mA can work reliably. Semi-isolated input and output means quarantined but when using two or more power supply two power needed common ground (negative), two different voltage power supply can be different in different types of power as long as they can be negative together on it. Specific wiring diagrams see below
Track Page Views With Auctiva's FREE Counter