Arduino UNO R3 Atmega328P compat., 16MHz, CH340G USB, 32kB Flash Memory #0255

$7.99 Buy It Now 7d 13h, $3.40 Shipping, 30-Day Returns, eBay Money Back Guarantee

Seller: Top-Rated Seller universal-solder (3,372) 99.9%, Location: Yorkton, Saskatchewan, Ships to: CA, Europe, US, AU, Item: 262830262644 Please use the Shopping Cart to order multiple items and check out everything together.Ships from Yorkton, SK, CanadaShips same/next Business DayFREE Gift with every Order >30 CAD*FREE Expedited Shipping >100 CAD**30 Days Return PolicyVisit Our StoreClick Here Advanced Arduino Uno R3 comp. Atmega328P, FREE pin header, CH340G USB Arduino UNO R3 compatible micro controller development board with CH340G USB-TTL bridge. Our UNO R3 board comes with the essential features of the original Arduino UNO R3, with some additional advantages. With the included pin header and the special advanced board layout, is our UNO R3 board much better suitable for your bread board projects than any other UNO R3 board design, the original Arduino UNO R3 included (see picture). Essential features of the Original Arduino UNO R3, not included in many of the Chinese boards: - Diode "VD" avoids conflicts between different power supplies when connected to 2 different Vin sources same time - Transistor "Q1" protects your computer's USB port when UNO is connected to "Vin" source the same time - ML358 OPA decouples the LED on I/O13 to make the port usable for other purposes as well Additional features as advantage over the original Arduino UNO R3: - 3.3V LDO "U5" can deliver 200mA contiunously (original Arduino UNO R3 only 150mA) - additional tie points 3.3V, 5V, GND, SCL, and SDA for easier I2C bus access - precisely 16MHz crystal with 0.003% error (original Arduino UNO R3 only +/- 0.5%) For clock applications, the original Arduino UNO R3 board is not suitable because of its very bad clock generator: - A clock, built with the original Arduino UNO R3, would have an error of about 7 minutes per day!! - A clock, built with our UNO R3 board, would have an error of less than 3 seconds per day!! Windows 10 and most Linux distributions come with the necessary driver for the CH340G USB already on board. Drivers for older Windows versions and Mac OS can be downloaded fro our website. A set of FREE headers is included with every UNO controller. Atmega328P-AU with 16 MHz, 32kB, 20 I/O D13 status LED, RX/TX LEDs, and power LED 100% compatible to Arduino IDE, Arduino sketches, Arduino shields CH340G USB bridge with drivers for Mac and Windows Did you ever realize, that on pretty much every of those UNO R3 boards the letters "TX" or "RX" for the transmit and receive LEDs are upside down, or RX and TX are switched ;-) * FREE with every Order >30 CAD: Our beautiful USB Keychain "5 Stars For You" SMD Soldering Practice Kit. 5 sparkling RGB stars to show our appreciation. Also available separately for 1.49 CAD (klick HERE) ** FREE Expedited Shipping with every Order >100 CAD: Canada only. Standard Shipping is Canada Post Letter Mail. For all Details about Shipping Options and Fees see Tab "Shipping and payments".Documentation, Links and DownloadsShipping Fees and TimesReturnsDisclaimer (important)Documentation, Links and DownloadsShipping Fees and TimesReturnsDisclaimer (important) Open-Hardware has a strong Community Support, and Google will be your Friend to find Example Code, Hook-Up Guides, and Troubleshooting information. 99% of all information you could ask for is available on GitHub, Hackster, Instructables and similar Websites. Another Source for Links and Downloads, specially for our own CANADUINO® Brand Products, is UNIVERSAL-SOLDER® official Website. If you are not able to find necessary Information on any of the recommended Sources, please get in Touch with our Customer Support, and we will do everything possible to help you. Please find all information about combined shipping, available shipping services, rates and eBay's estimated average delivery times on the tab "Shipping and payments". If you order multiple Items, please add them to the Shopping Cart, and check out everything together, to avoid double paying of Shipping Fees. We are only able to refund over-paid Shipping Fees on your request, but not automatically. We strive to ship every order the same or next Business Day. Orders of 100 CAD and more receive a free upgrade to Expedited Parcel (Canada) or Tracked Package (US). Standard Shipping is always Canada Post Letter Mail, which can take up to 15 Business Days within Canada, 20 Business Days to United States, and 30 Business Days for International Shipments. Has this time passed without your Order being delivered, please get in Youch with our Customer Support, and we will find a Solution. Be fair, don't open a Case on eBay. Give us a Chance to solve the issue first. If you need Tracking for your Order, please upgrade to Expedited Parcel. If you need your Order very quick, please upgrade to Express Post. Returns are accepted within 30 Days after the latest expected Delivery Date. If you want to return a Product, make sure it is in unused condition, not modified, assembled or soldered. We will charge no rewarehousing fee for unused returns, but we will not accept returns of modified Products and assembled DIY Kits. Shipping fees have to be paid by the customer. We refund shipping fees if the reason for the Return is clearly our fault or a verifiable damaged product. If the customer prefers a replacement over a refund, we will send everything what is necessary to return the poduct (Box or Envelope, Lable etc.) together with the replacement part. Electronic Parts, Kits and Modules are no Toys. Electronic Technicians and Engineers spend years on College or University. You MUST possess necessary understanding, training, and skills about electronics, schematics, soldering, and programming. It is your responsibility to make sure you possess the necessary knowledge. We can't be held responsible if your project does not work the way you expect. You must have neccessary troubleshooting skills when you build DIY Soldering Kits. Since nobody is able to find out what you did wrong when you assembled it, there will be less support and no return for already assembled Soldering Kits. We also can't be held responsible or liable for damages, malfunction, injuries, fire, burns, or other results that may occur with incorrect or correct use of our products. Visit Our StoreClick HereArduino UNO R3 compatible micro controller development board with CH340G USB-TTL bridge. Our UNO R3 board comes with the essential features of the original Arduino UNO R3, with some additional advantages. With the included pin header and the special advanced board layout, is our UNO R3 board much better suitable for your bread board projects than any other UNO R3 board design, the original Arduino UNO R3 included (see picture). Essential features of the Original Arduino UNO R3, not included in many of the Chinese boards: - Diode "VD" avoids conflicts between different power supplies when connected to 2 different Vin sources same time - Transistor "Q1" protects your computer's USB port when UNO is connected to "Vin" source the same time - ML358 OPA decouples the LED on I/O13 to make the port usable for other purposes as well Additional features as advantage over the original Arduino UNO R3: - 3.3V LDO "U5" can deliver 200mA contiunously (original Arduino UNO R3 only 150mA) - additional tie points 3.3V, 5V, GND, SCL, and SDA for easier I2C bus access - precisely 16MHz crystal with 0.003% error (original Arduino UNO R3 only +/- 0.5%) For clock applications, the original Arduino UNO R3 board is not suitable because of its very bad clock generator: - A clock, built with the original Arduino UNO R3, would have an error of about 7 minutes per day!! - A clock, built with our UNO R3 board, would have an error of less than 3 seconds per day!! Windows 10 and most Linux distributions come with the necessary driver for the CH340G USB already on board. Drivers for older Windows versions and Mac OS can be downloaded fro our website. A set of FREE headers is included with every UNO controller. ---Atmega328P-AU with 16 MHz, 32kB, 20 I/O ---D13 status LED, RX/TX LEDs, and power LED ---100% compatible to Arduino IDE, Arduino sketches, Arduino shields ---CH340G USB bridge with drivers for Mac and Windows Did you ever realize, that on pretty much every of those UNO R3 boards the letters "TX" or "RX" for the transmit and receive LEDs are upside down, or RX and TX are switched ;-) Ships from Yorkton, SK, CanadaShips same/next Business DayFREE Gift with every Order >30 CAD*FREE Expedited Shipping >100 CAD**30 Days Return Policy Advanced Arduino Uno R3 comp. Atmega328P, FREE pin header, CH340G USB Arduino UNO R3 compatible micro controller development board with CH340G USB-TTL bridge. Our UNO R3 board comes with the essential features of the original Arduino UNO R3, with some additional advantages. With the included pin header and the special advanced board layout, is our UNO R3 board much better suitable for your bread board projects than any other UNO R3 board design, the original Arduino UNO R3 included (see picture). Essential features of the Original Arduino UNO R3, not included in many of the Chinese boards: - Diode "VD" avoids conflicts between different power supplies when connected to 2 different Vin sources same time - Transistor "Q1" protects your computer's USB port when UNO is connected to "Vin" source the same time - ML358 OPA decouples the LED on I/O13 to make the port usable for other purposes as well Additional features as advantage over the original Arduino UNO R3: - 3.3V LDO "U5" can deliver 200mA contiunously (original Arduino UNO R3 only 150mA) - additional tie points 3.3V, 5V, GND, SCL, and SDA for easier I2C bus access - precisely 16MHz crystal with 0.003% error (original Arduino UNO R3 only +/- 0.5%) For clock applications, the original Arduino UNO R3 board is not suitable because of its very bad clock generator: - A clock, built with the original Arduino UNO R3, would have an error of about 7 minutes per day!! - A clock, built with our UNO R3 board, would have an error of less than 3 seconds per day!! Windows 10 and most Linux distributions come with the necessary driver for the CH340G USB already on board. Drivers for older Windows versions and Mac OS can be downloaded fro our website. A set of FREE headers is included with every UNO controller. Atmega328P-AU with 16 MHz, 32kB, 20 I/O D13 status LED, RX/TX LEDs, and power LED 100% compatible to Arduino IDE, Arduino sketches, Arduino shields CH340G USB bridge with drivers for Mac and Windows Did you ever realize, that on pretty much every of those UNO R3 boards the letters "TX" or "RX" for the transmit and receive LEDs are upside down, or RX and TX are switched ;-) * FREE with every Order >30 CAD: Our beautiful USB Keychain "5 Stars For You" SMD Soldering Practice Kit. 5 sparkling RGB stars to show our appreciation. Also available separately for 1.49 CAD (klick HERE) ** FREE Expedited Shipping with every Order >100 CAD: Canada only. Standard Shipping is Canada Post Letter Mail. For all Details about Shipping Options and Fees see Tab "Shipping and payments".Visit Our StoreClick HereDocumentation, Links and Downloads Open-Hardware has a strong Community Support, and Google will be your Friend to find Example Code, Hook-Up Guides, and Troubleshooting information. 99% of all information you could ask for is available on GitHub, Hackster, Instructables and similar Websites. Another Source for Links and Downloads, specially for our own CANADUINO® Brand Products, is UNIVERSAL-SOLDER® official Website. If you are not able to find necessary Information on any of the recommended Sources, please get in Touch with our Customer Support, and we will do everything possible to help you.Shipping Fees and Times Please find all information about combined shipping, available shipping services, rates and eBay's estimated average delivery times on the tab "Shipping and payments". If you order multiple Items, please add them to the Shopping Cart, and check out everything together, to avoid double paying of Shipping Fees. We are only able to refund over-paid Shipping Fees on your request, but not automatically. We strive to ship every order the same or next Business Day. Orders of 100 CAD and more receive a free upgrade to Expedited Parcel (Canada) or Tracked Package (US). Standard Shipping is always Canada Post Letter Mail, which can take up to 15 Business Days within Canada, 20 Business Days to United States, and 30 Business Days for International Shipments. Has this time passed without your Order being delivered, please get in Youch with our Customer Support, and we will find a Solution. Be fair, don't open a Case on eBay. Give us a Chance to solve the issue first. If you need Tracking for your Order, please upgrade to Expedited Parcel. If you need your Order very quick, please upgrade to Express Post. Returns Returns are accepted within 30 Days after the latest expected Delivery Date. If you want to return a Product, make sure it is in unused condition, not modified, assembled or soldered. We will charge no rewarehousing fee for unused returns, but we will not accept returns of modified Products and assembled DIY Kits. Shipping fees have to be paid by the customer. We refund shipping fees if the reason for the Return is clearly our fault or a verifiable damaged product. If the customer prefers a replacement over a refund, we will send everything what is necessary to return the poduct (Box or Envelope, Lable etc.) together with the replacement part.Disclaimer (important) Electronic Parts, Kits and Modules are no Toys. Electronic Technicians and Engineers spend years on College or University. You MUST possess necessary understanding, training, and skills about electronics, schematics, soldering, and programming. It is your responsibility to make sure you possess the necessary knowledge. We can't be held responsible if your project does not work the way you expect. You must have neccessary troubleshooting skills when you build DIY Soldering Kits. Since nobody is able to find out what you did wrong when you assembled it, there will be less support and no return for already assembled Soldering Kits. We also can't be held responsible or liable for damages, malfunction, injuries, fire, burns, or other results that may occur with incorrect or correct use of our products. Arduino UNO R3 compatible micro controller development board with CH340G USB-TTL bridge. Our UNO R3 board comes with the essential features of the original Arduino UNO R3, with some additional advantages. With the included pin header and the special advanced board layout, is our UNO R3 board much better suitable for your bread board projects than any other UNO R3 board design, the original Arduino UNO R3 included (see picture). Essential features of the Original Arduino UNO R3, not included in many of the Chinese boards: - Diode "VD" avoids conflicts between different power supplies when connected to 2 different Vin sources same time - Transistor "Q1" protects your computer's USB port when UNO is connected to "Vin" source the same time - ML358 OPA decouples the LED on I/O13 to make the port usable for other purposes as well Additional features as advantage over the original Arduino UNO R3: - 3.3V LDO "U5" can deliver 200mA contiunously (original Arduino UNO R3 only 150mA) - additional tie points 3.3V, 5V, GND, SCL, and SDA for easier I2C bus access - precisely 16MHz crystal with 0.003% error (original Arduino UNO R3 only +/- 0.5%) For clock applications, the original Arduino UNO R3 board is not suitable because of its very bad clock generator: - A clock, built with the original Arduino UNO R3, would have an error of about 7 minutes per day!! - A clock, built with our UNO R3 board, would have an error of less than 3 seconds per day!! Windows 10 and most Linux distributions come with the necessary driver for the CH340G USB already on board. Drivers for older Windows versions and Mac OS can be downloaded fro our website. A set of FREE headers is included with every UNO controller. Atmega328P-AU with 16 MHz, 32kB, 20 I/O D13 status LED, RX/TX LEDs, and power LED 100% compatible to Arduino IDE, Arduino sketches, Arduino shields CH340G USB bridge with drivers for Mac and Windows Did you ever realize, that on pretty much every of those UNO R3 boards the letters "TX" or "RX" for the transmit and receive LEDs are upside down, or RX and TX are switched ;-) Condition: New, Model: Arduino Uno R3, MPN: Does Not Apply, Brand: UNIVERSAL-SOLDER®, Type: Arduino

PicClick Insights PicClick Exclusive
  •  Popularity - 11,169 views, 11.9 views per day, 935 days on eBay. Super high amount of views. 608 sold, 85 available.
  •  Price -
  •  Seller - 3,372+ items sold. 0.1% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.
Similar Items