100
SPI 74-111 Non-Reversing Tapping Head$40.69 Buy It Now
Hardinge Tt-5/8 Tapping Head + Collet$312.45 Buy It Now or Best Offer
Hardinge Tt-3/4 Tapping Head + Collet$312.45 Buy It Now or Best Offer
Hougen 6-12234 1-1/16" X 6" "12,000-Series" Annular Cutter$251.32 Buy It Now
Jarvis Torqomatic Tapping Head 101. Capacity 0 to 10
$108.67 Buy It Now
Parlec Numertap 80 Tapping Chuck + Collets - B40-80Ta3$543.41 Buy It Now or Best Offer
Procunier 57413 1" Straight Shank Tension Tapping Chuck With Collets Read$135.84 Buy It Now
Lot B1 Burgmaster Tapper Tapping Head With 5/8-16 Mount$74.72 Buy It Now
Lot A6C 2 Tapmatic Metal Threading Tapping Tapper Heads For Parts Missing Parts$74.72 Buy It Now
Walton Tap Holder$44.15 Buy It Now
Lot A6A Tapmatic Metal Threading Tapping Tapper Head Ncr1A Untested For Parts$135.84 Buy It Now
SUHNER GSR5 reversible tapmatic head #6-1/2" cap 1/4-1/2" Jacob's rubber flex$407.55 Buy It Now
Tapmatic N/CR1 reversible tapping head #10-1/2" M4.5-M12 capacity **FOR PARTS**$108.67 Buy It Now
Tapmatic N/CR0A reversible tapping head #4-1/4" M2.5-M7 capacity W/flex collet$305.66 Buy It Now
Tapmatic NSM6 tension compression tap chuck #10-3/4" or 5mm-18mm capacity$271.70 Buy It Now
652092 Geometric Tapping Die Head 1"-14tpi Vintage USA Machinist Tools$407.55 Buy It Now or Best Offer
Reversible Tapping Attachment M 6 - M 16 Tap Capacity MT3 Shank
$325.78 Buy It Now
Tap Handle - 7/16 To 7/8 Shank Capacity$23.77 Buy It Now
Tapmatic SM 6 Tapping Chuck 1in Shank, Tension & Compression CAP. M5-M18 #10-5/8$360.02 Buy It Now
Command B4T4-0002 Quick Release Chuck Tap and Tool Holder (Not through Cooled)$135.84$129.05 Buy It Now
Command B4T4-0002 Quick Release Chuck Tap and Tool Holder$135.84$129.05 Buy It Now
tapmatic 50x automatic reversing tapping head with armless atactment$305.67 Buy It Now
tapping head proctiour #3 3/4 cap # 3morse taper$122.27 Buy It Now or Best Offer
Floating Tap holder Emuge F3151H36.1.44 Softsynchro 1 - Weldon 1" Capacity 7/16
$480.00 Buy It Now
Ettco Tapper Tapping Head 1/2” Tap TELCO Pair NICE RARE Vtg Machinist Mill Tools$433.38 Buy It Now
Lot B9 Burgmaster Tapper Tapping Head With 5/8-16 Mount Model 1D$61.13 Buy It Now
Lot B2 Burgmaster Tapper Tapping Head With 5/8-16 Mount Model 1D$74.72 Buy It Now
Sandvik Varilock 391.60-02 50 140A compression tension tap chuck holder size 2$135.85 Buy It Now
The Procunier Double Jaw Tapping Head 0-7/32" Looks Good, Very Old - - E1348$105.97 Buy It Now or Best Offer
Lot A6B Tapmatic Metal Threading Tapping Tapper Head Rdt15 Untested For Parts$135.84 Buy It Now
Procunier Tapping Head 3MT Mount No 0 Min Tap Capacity No 10 Max 11003$815.13$415.72 Buy It Now or Best Offer
Errington MT2 10B Tapping Head for Drill Press or Milling machine
$135.85 Buy It Now or Best Offer
# 2 to # 3 Morse Taper Shank Tool Extension Adapter Sleeve, Steel, Tang Twisted$10.83 Buy It Now or Best Offer
# 4 to # 3 Morse Taper Shank Tool Adapter Sleeve, Steel Reducer, Very Good, VGC$10.83 Buy It Now or Best Offer
SCULLY JONES # 1 Morse Taper Shank Tap Holder Split Adapter, .140" Open, # 24DR$12.19 Buy It Now or Best Offer
GLENZER DETROIT # 4 Morse Taper Shank x 5/8" Pulley Tap Holder Split Adapter, VG$14.90 Buy It Now or Best Offer
TM Smith Tool TMS-FITH 222-716 1104 124001 Quick Change Tool Holder$101.88 Buy It Now or Best Offer
Ettco Tool & Machine Tapping Head Model 1B 6-32 to 1/4-20 Capacity With Mount
$101.89 Buy It Now
Tapmatic Ncr-0A Tapping Attachment / Head - Bt40 Shank$407.55 Buy It Now or Best Offer
Tapmatic RDT25 Tapping Attachment Head 1" Straight Shank$95.03 Buy It Now or Best Offer
carboloy systems BT40-TH4.80-0200 L.C. 3986 tesion tapping head collet holder$271.70 Buy It Now or Best Offer
New Smith Tools Tms-850-288-5 Extended Rangetap Adapter Collet Holder$54.33 Buy It Now
(GS-TER32-D25)Collet Chuck Holder High Concentricity Adapter Floating Tap AOE
$66.87 Buy It Now
Iscar Its-Bore Modular Tapping Chuck + Collets - Tp Mb50-M3-12$950.97 Buy It Now or Best Offer
Iscar Its-Bore Modular Tapping Chuck + Collets - Tp Mb50-M8-20$1,086.83 Buy It Now or Best Offer
Lyndex Tension/Compression Tapper Head C4505-0875 CAT45 L 5.66 D 2.00-in$88.31 Buy It Now
Tapmatic Sft Ii 100 Rigid Tapping Head / Attachment + Collets$1,154.75 Buy It Now or Best Offer
Self Tap & Reamer Aligner Holder for Perfect Alignment for Tapping Drills
$46.81 Buy It Now
KALANJARI Self Tap & Reamer Aligner Holder for Perfect Alignment for Tapping
$46.60 Buy It Now
Self Tap & Reamer Aligner Holder for Perfect Alignment for Tapping Drills
$46.60 Buy It Now
SL25-TER25-80L C25 ER25A Floating Tapping Collet Chuck Holder Straight Shank$28.94 Buy It Now
SL25-TER20-80L Collet Chuck Holder Straight Shank Lathe Machine Tapping Tool$27.17 Buy It Now
Size #2 Quick Release Tension Compression Tap Chuck, 1" Shank, 4.25" OAL$40.69 Buy It Now
Emuge Soft Synchro Tapping Head Er 20 W/ Hsk63A Hsk 63 A Shank
$407.56 Buy It Now or Best Offer
Emuge Soft Synchro Tapping Head Er32 W/ Hsk63A Hsk 63 A Shank
$407.56 Buy It Now or Best Offer
Boyar Schultz 5/8 non-releasing tap holder
$101.89 Buy It Now or Best Offer
NEW SANDVIK COROMANT C5-391.61-01 097 CAPTO to BILZ QUICK CHANGE TAPPING CHUCK$1,120.80 Buy It Now or Best Offer
Guhring Goldring Power Tap Bg 1/4 Hss 5731-13.157 New & Boxed 8721
$76.83 Buy It Now or Best Offer
Guhring Goldring Power Tap B-5/8- 11 Unc-2B 05725 15.875 New & Boxed 8722
$76.83 Buy It Now or Best Offer
(5) Size 4 Tapping Collets for Procunier 4E Tap Head ALL DIFFERENT 1/8P-3/4$216.01 Buy It Now or Best Offer
(6) Size 1 Tapping Collets for Procunier 1E Tap Head ALL DIFFERENT 1/4-#8$202.42 Buy It Now or Best Offer
TM Smith 253-SA20-212 Floating Tap Holder Quick Change SA20 Collet ACME 3/4"-12$62.48 Buy It Now
TM Smith 105-212 Floating Tap Holder ER20 Collet Automotive Shank ACME 3/4-12$50.25 Buy It Now
Photocutter 30mm x 40mm (right angle specification) with adjustmen From Japan$82.65 Buy It Now
Brookfield Floating Adjustable Non-Releasing Tap Holder - 100-400$101.88 Buy It Now or Best Offer
(gs-ter32-d25)collet Chuck Holder Er32 High Concentricity Adapter Floating Tap
$61.12 Buy It Now or Best Offer
(gs-ter32-d25)collet Chuck Holder Er32 High Concentricity Adapter Floating Tap
$62.33 Buy It Now or Best Offer
n/c-R1 tapmatic #6-1/2 m3-m12 tapping head (Joe)
$237.75 Buy It Now or Best Offer
ettco tap head no. 2B tapper No 10 To 3/8 In Steel Great Shape (Joe)
$149.44 Buy It Now or Best Offer
Used Tapmatic Cat40 Reversing Tapping Head N/C-R1 #10 To 1/2"$258.12 Buy It Now or Best Offer
Bilz Tapping Adapter CAT50 Coolant Thru 0 to 9/16" Tap Cap 117012$353.22$173.08 Buy It Now or Best Offer
CST Tapmatic RDT50$760.77 Buy It Now or Best Offer
Tapmatic Synchroflex Sft50 Rigid Tapping Er20 Collet Chuck Loc11640
$67.91 Buy It Now or Best Offer
Tapmatic 30X Reversible Tapping Head Attachment 0-1/4" M1.4-M6 No. 3 Morse Arbor$543.41 Buy It Now or Best Offer
Tapmatic SPD5 Reversible Tapping Attachment 7/8"-20 Thread Mount #6-1/2" M3-M12$813.77 Buy It Now
(GS-TER32-D25)Collet Chuck Holder ER32 Concentricity Adapter Floating Tap AOE
$64.23$61.03 Buy It Now
Ettco Tool # 4 Tapper Tapping Head 1/4 - 1/2” Tap MADE IN THE USA!$203.78 Buy It Now
Lyndex W1005-0562 Weldon Shank Tension / Compression Tap Holder$326.05 Buy It Now or Best Offer
Kennametal Bilz #2 CNC Rigid Tapping Set, Lyndex holder$944.19$849.77 Buy It Now or Best Offer
omegadrill tap extractor set 5/64 1/8 3/16 1/4 15-937-004 (Joe)
$224.16 Buy It Now or Best Offer
SPV Tapping head. Model SAR 100$224.16 Buy It Now or Best Offer
Tapmatic A3 #0-1/4" M1.4-M7 Tap Size Tapping Head Attachment Morse Taper MT#2$407.55 Buy It Now or Best Offer
SL20-TER16M-80L ER16M Floating Tapping Collet Chuck Holder Straight Shank$23.08 Buy It Now
Universal Eng Kwik Switch 200 Collet Chuck W. Holder Tightener$163.03 Buy It Now or Best Offer
Universal Eng Kwik Switch 200 Tapping Head Accu Flex$190.20 Buy It Now or Best Offer
TM Smith 311-51-716 Tap Holder Weldon Shank, #1 Tap Size$95.08 Buy It Now or Best Offer
TM Smith 311-51-716 Tap Holder 1'' Shank 6-7/8'' OAL$88.29 Buy It Now or Best Offer
TM Smith Tap Holder Tool Holder 3/4'' Opening 1'' Shank 6-1/2'' OAL$67.91 Buy It Now or Best Offer
Tm Smith Tool Quick Change Tap Holder 311-51-716 1'' Shk$88.29 Buy It Now or Best Offer
Tm Smith Tool Usa Quick Change Tap Holder 311-51-716 1'' Shk$88.29 Buy It Now or Best Offer
Tm Smith Tool Usa Quick Change Tap Holder 311-51-716 1'' Shk Tms-Mc111$88.29 Buy It Now or Best Offer
Scully Jones Hand Tap Holder 1-5/8 #4 Morse Taper Shank Part No. 04115$95.75 Buy It Now or Best Offer
Osg Cc-Sft M18X2.5 6Hx Hsse Spiral Tapping Flute 8360
$78.43 Buy It Now or Best Offer
Nikken CAT40 Tapping Holder 3/4" Capacity CAT40-WE3/4A-65U (Stk37)$67.93 Buy It Now or Best Offer
UNIVERSAL WE-1 TENSION / COMPRESSION TAPPING CHUCK w/ BT40 SHANK "E"$40.76 Buy It Now
Parlec CAT50 Numertap 770 Tension Compression Tapping Chuck C50-77TA4C (Stk1)$270.35 Buy It Now or Best Offer
CAT40 x 1" 2.93 Tension/Compression Tap Holders
$421.59 Buy It Now
WM Ziegler Floating Tool Holder Qty 2. 5/8” Shank 1-BG-5/8” -12$54.33 Buy It Now
Erickson C-123401 Safe-Drive Tap Holder: CAT40$122.27 Buy It Now or Best Offer
Tm Smith 51-110 #1 Quick Change Tap Adapter For #10 Taps Tapping Collet Holder$27.16 Buy It Now or Best Offer
- BT30 Face Mill 50MM with inserts - Uses industry standard APKT1604 inserts.
- SPI Bilz #1 Rigid Tapping Chuck 75-836 w/ Command CAT50 C6P2-0001 (Stk52) - (Stk52) SPI Bilz #1 Rigid Tapping Chuck 75-836 w/ Command CAT50 1" Tapping Chuck Holder C6P2-0001.
- Hardinge TT-5/8 Collet Style Releasing Tap Holder, Used - Hardinge TT-5/8 Collet Style Releasing Tap Holder in very good condition. (4) Available, this listing is for one.
- Scully Jones Hand Tap Holder 1-5/8 #4 Morse Taper Shank Part No. 04115 - Scully Jones Hand Tap Holder 1-5/8 #4 Morse Taper Shank Part No. 04115
- (GS-TER32-D25)Collet Chuck Holder ER32 High-Concentricity Adapter Floating Tap S - Adapter Chuck: ER32. Made after quenching and hardening, possess high concentricity and good processing effect. Item Type: Collet Chuck holder. Purpose: CNC lathe tapping. Feature: 1. Surface: >0.08mm.
- RITMAR 707B-8 Tap Extension 5'' OAL - Title: RITMAR 707B-8 Tap Extension 5" OAL. We're down to earth, easy to work with people. Fast Dispatch Service.
- brown sharpe non releasing tap holder 1” shank - brown sharpe non releasing tap holder 1” shank. Takes a 1” bushing
- Jarvis 3-375 tapping head 0-3/8" cap 2MT shank rubber flex collet chuck
- Parlec No. 2 Tension Compression Tapping Chuck Tap Holder NumerTap S12-77TA5 - Tension & Compression. w/ 1/2" Holder.
- Parlec EXT125-16 Double Angle Extension Collet 1000 - Fast Dispatch Service. We're down to earth, easy to work with people. PRODUCT INFORMATION.
- Parlec EXT125-16 1000 Double Angle Extension Collet 16-1/2'' OAL - Fast Dispatch Service. We're down to earth, easy to work with people. PRODUCT INFORMATION.
- Parlec EXT125-16 Double Angle Extension Collet 16-1/2'' OAL - Fast Dispatch Service. We're down to earth, easy to work with people. PRODUCT INFORMATION.
- New Ingersoll 2913228 ING Tool Holder Extension 1.14" X 6.75" S125MOD16SA-90
- TSD Italy 16902BF 3/4" collet 2B tap tapping quick change chuck adapter holder - Very good used shape - works perfect.
- SPI 15/16" Tap Positive Drive Quick Change S2 Tap Holder 74-362-5
- 1" Tap Positive Drive Quick Change Tap Holder S2 1.5" Projection SPI 74-363-3 - SPI 74-363-3 1″ Tap Positive Drive Quick Change Tap Holder.
- Ettco 3B Tapper 1/4" to 1/2" - Good used tool.
- ACCUPRO CAT40 Taper Shank Rigid Tapping Adapter 5/16 to 7/8″ Tap Capacity 778586 - Taper Size CAT40. Tapping Adapter. Tapping Style Rigid. Shank Type Taper Shank. Adapter Size 2. Cab Bullet Bottom. September 20 2022.
- Ettco Tool & Mach Co. 4B Tapper Tapping Head 1/4 - 1/2” Tap MADE IN THE USA! - You are looking at a Ettco Tool & Mach Co. 4B Tapper Tapping Head 1/4 - 1/2” Tap MADE IN THE USA! MADE IN THE USA!
- 7/8" 2B size collet tap tapping quick change chuck adapter NICE - Very good used shape - works perfect.
- BILZ WES2B WES 2B 3/4" collet tap tapping quick change chuck adapter NICE - Very good used shape - works perfect.
- Erickson B-57949 Tap Extension Holder 0.210'' 4-5/8'' OAL - Title: Erickson B-57949 Tap Extension Holder 0.210" 4-5/8" OAL. We're down to earth, easy to work with people. Fast Dispatch Service.
- Erickson B-57949 Tap Extension Holder w/tap - We're down to earth, easy to work with people. Fast Dispatch Service.
- Erickson Tool B-54726 Tap Extension Holder 0.130'' 4-3/4'' OAL - Title: Erickson Tool B-54726 Tap Extension Holder 0.130" 4-3/4" OAL. We're down to earth, easy to work with people. Fast Dispatch Service.
- Erickson B54722 Tap Extension Holder 0.310'' 4-3/4'' OAL - Title: Erickson B54722 Tap Extension Holder 0.310" 4-3/4" OAL. Model: B54722. MPN: B54722. We're down to earth, easy to work with people. Fast Dispatch Service.
- Erickson BM-1-B-54720 0-213216 Tap Extension Holder 0.162'' 4-3/4'' OAL - Title: Erickson BM-1-B-54720 0-213216 Tap Extension Holder 0.162" 4-3/4" OAL. We're down to earth, easy to work with people. Fast Dispatch Service.
- Erickson B-54721 Tap Extension Holder 0.190'' 4-3/4'' OAL - Title: Erickson B-54721 Tap Extension Holder 0.190" 4-3/4" OAL. We're down to earth, easy to work with people. Fast Dispatch Service.
- Erickson BM-1-B-54720 0-213216 Tap Extension Holder, Missing Screw - We're down to earth, easy to work with people. Fast Dispatch Service.
- TAPMATIC 0 to 1/4" (M1.4-M7) TAPPING HEAD ATTACHMENT w/ 1" SHANK - #NCR0A - Model #: NCR0A. Made in the U.S.A. by Tapmatic. Flex Collet Size Included.100" to. 176".
- Accupro QCK-2 CAT-40 Taper Shank Rigid Tapping Adapter #0 to 7/8″ Tap Capacity - Taper Shank Rigid Tapping Adapter. #0 to 7/8″ Tap Capacity 90mm Projection, Size 2 Adapter, Quick Change, Through Coolant.
- Accupro QCK-1 BT-40 Taper Shank Rigid Tapping Adapter #0 to 9/16″ Tap Capacity - 72mm Projection, Size 1 Adapter, Quick Change, Through Coolant.
- J467 Tapping Chuck M2-M7 Reversible Tapping Head Drilling Machine Accessories - Tapping range: M2-M7. Easy to operate. Adjustable torque. Overload protection.
- Pioneer 1.0" Straight Shank er 20 Precision Syncronization er Tapping Holder
- Pioneer CAT 40 er 20 x 4.43" Precision Syncronization er Tapping Holder
- Pioneer 1.0 " Tige Droite Er 20 Précision Syncronization Er Entaillage Support
- 12 Pcs. Techniks CAT 40 Bilz Style #1 Rigid CNC Tapping Kit
- 12 Pièces Techniks Chat 40 Bilz Style #1 Rigide CNC Entaillage Kit
- Techniks 1 " S.S Microflaot #1 CNC Robinet Chuck + Er 16 Adapter-295 %+
- Pioneer Double Contact Chat 40 Er 20 x 4.43 " Précision Syncro Entaillage
- Pioneer CAT 40 er 32 x 5.00" Precision Syncronization er Tapping Holder
- Pioneer Chat 40 Er 32 x 5.00 " Précision Syncronization Er Entaillage Support
- Techniks CAT 40 MicroFLAOT #1 CNC Tap Chuck+ER 16 Adapter-295%+ Productivity
- Pioneer Chat 40 Er 20 x 4.43 " Précision Syncronization Er Entaillage Support
- Techniks 1 " S.S Microflaot #1 CNC Robinet Chuck + ER16 Adaptateur, Collet
- Pioneer Double Contact Chat 40 Er 32 x 5.0 " Précision Syncro Entaillage Support
- Techniks 1" s.s MicroFLAOT #1 CNC Tap Chuck+ER 16 Adapter-295%+ Productivity
- Pioneer Dual Contact CAT 40 er 32 x 5.0" Precision Sync er Tapping Holder
- 12 Pcs. Techniks CAT40 Bilz Style #1 Tension/Compression CNC Tapping Kit
- Pioneer Hsk 63A Er 32 x 7.25 " Précision Syncronization Er Entaillage Support
- 14 Pcs. Techniks CAT 40 Bilz Style #2 Tension/Compression CNC Tapping Kit
- 14 Pièces Techniks Chat 40 Bilz Style #2 Tension / Compression CNC Entaillage
- Pioneer HSK 63A er 20 x 6.68" Precision Syncronization er Tapping Holder
- 12 Pièces Techniks CAT40 Bilz Style #1 Tension / Compression CNC Entaillage Kit
- Pioneer HSK 63A er 32 x 7.25" Precision Syncronization er Tapping Holder
- Pioneer Hsk 63A Er 20 x 6.68 " Précision Syncronization Er Entaillage Support
- Pioneer Dual Contact CAT 40 er 20 x 4.43" Precision Sync er Tapping Holder
- Techniks Chat 40 Microflaot #1 CNC Robinet Chuck + Er 16 Adapter-295 %+
- Techniks 1" s.s MicroFLAOT #1 CNC Tap Chuck+ER16 Adapter,Collet Set-Complete Kit
- Techniks Chat 40 Microflaot #1 CNC Robinet Chuck + ER16 Adaptateur, Collet
- Pioneer 1.0" Straight Shank er 32 Precision Syncronization er Tapping Holder
- Pioneer 1.0 " Tige Droite Er 32 Précision Syncronization Er Entaillage Support
- Techniks CAT 40 MicroFLAOT #1 CNC Tap Chuck+ER16 Adapter,Collet Set-Complete Kit
- Valenite BT35-S125-175 BT35 Tapping Tool Holder Made In USA - Valenite BT35-S125-175 BT35 Tapping Tool Holder Made In USA.
- TM Smith 51-003 9/16'' Tap Adapter Collet Quick Change Holder - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- COMMAND XTC2-0875 7/8 TAP ADAPTER #2 Holder - We're down to earth, easy to work with people. Fast Dispatch Service.
- TM Smith 51-006 3/8'' Tap Adapter Collet Quick Change Holder - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith 51-010 5/8'' Tap Adapter Collet Quick Change Holder - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith 51-41000 Tap Adapter Collet Quick Change Holder - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- Walter Valenite VE 1250 Collet Chuck Extension 1.250'' - MPN: VE 1250. We're down to earth, easy to work with people. Quality Products at Lowest Prices.
- TM Smith 51-012 3/4'' Tap Adapter Collet Quick Change Holder - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith JMS 51-012 3/4'' Tap Adapter Collet Quick Change Holder - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith TMS 51-006 3/8'' Tap Adapter Collet Quick Change Holder - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith TMS 51-006 Tap Adapter Collet Quick Change Holder - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith TMS 51-012 3/4'' 0.750 Tap Adapter Collet Quick Change Holder - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- Walter Valenite VE 1000 Collet Chuck Extension VE1000 USA - Model: VE1000. MPN: VE1000. We're down to earth, easy to work with people.
- Walter Valenite VE0750 Collet Chuck Extension 3/4'' w/ bit DVC4 - Model: VE0750. MPN: VE0750. Shank has wear as shown. We're down to earth, easy to work with people. Quality Products at Lowest Prices.
- TM Smith TMS 51-41000 Tap Adapter Collet Quick Change Holder USA - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith TMS 51-008 1/2'' Tap Adapter Collet Quick Change Holder USA - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith TMS 51-012 3/4 Tap Adapter Collet Quick Change Holder USA - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- Walter Valenite VE 0500 Collet Chuck Extension VE0500 NO Nut - Model: VE0500. MPN: VE0500. We're down to earth, easy to work with people.
- Valenite 51-2040 Tap Adapter Collet Quick Change Holder USA - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith TMS 51-50700 212632 Tap Adapter Collet Quick Change Holder USA - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith TMS 51-50800 0414 Tap Adapter Collet Quick Change Holder USA - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- Walter Valenite VE 1000 Collet Chuck Extension VE1000 USA Shank has wear - Model: VE1000. MPN: VE1000. We're down to earth, easy to work with people. Quality Products at Lowest Prices.
- Valenite 51-009 9/16'' Tap Adapter Collet Quick Change Holder USA - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- 9/16'' Tap Adapter Collet Quick Change Holder - We're down to earth, easy to work with people. Model: Does Not Apply. MPN: Does Not Apply. Fast Dispatch Service. PRODUCT INFORMATION.
- Valenite VE 1250 Collet Chuck Extension Holder VE1250 1-1/4'' - Model: VE1250. MPN: VE1250. We're down to earth, easy to work with people. Quality Products at Lowest Prices.
- Yuasa accu tapping head - Yuasa accu tapping head.
- #772340 2-1/2" Geometric tapping head - #772340 2-1/2" Geometric tapping head.
- Tapmatic SPD5 #6-1/2" reversible tapping head 1" straight shank 1500RPM max - Tapmatic SPD5 #6-1/2" reversible tapping head 1" straight shank 1500RPM max. It is used and has nicks and scratches but is in good condition overall. Please look at pictures in detail and ask questions before bidding.
- Parlec 7716CG-12-062 5/8'' Tap Adapter Through Coolant 14-1/2'' OAL - Title: Parlec 7716CG-12-062 5/8" Tap Adapter Through Coolant 14-1/2" OAL. We're down to earth, easy to work with people. Fast Dispatch Service.
- Parlec 7716CG-12-037 3/8'' Tap Adapter Through Coolant 14-1/2'' OAL - Title: Parlec 7716CG-12-037 3/8" Tap Adapter Through Coolant 14-1/2" OAL. We're down to earth, easy to work with people. Fast Dispatch Service.
- TM Smith 51-110 #10 Tap Adapter Collet Quick Change - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith 53-018 1-1/8'' Tap Adapter Collet Quick Change - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith 52-51800 18mm Tap Adapter Collet Quick Change - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith 51-012 3/4'' Tap Adapter Collet Quick Change - We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- Parlec EXT100 TOOL EXTENSION TH04844514 7-1/2'' OAL - Model: TH04844514. MPN: EXT100. We're down to earth, easy to work with people.
- TM Smith 51-012 3/4'' 0.7500'' Tap Adapter Collet Quick Change - Title: TM Smith 51-012 3/4" 0.7500" Tap Adapter Collet Quick Change. We're down to earth, easy to work with people. Fast Dispatch Service. PRODUCT INFORMATION.
- TM Smith 0.378'' Tap Adapter Collet Quick Change - We're down to earth, easy to work with people. Model: Does Not Apply. MPN: Does Not Apply. Fast Dispatch Service. PRODUCT INFORMATION.
- Ettco Model 2B Tapping Head Tapper Morse Taper #2 Shank #10 to 3/8" Cap
- Ettco Model 2B Tapping Head Tapper Morse Taper #2 Shank #10 to 3/8" Cap. - Ettco Tapping Head. Specifications: Model: 2B Shank: Morse Taper No. 2 Capacity: #10 to 3/8" Condition: Good Working Please contact us if you need overnight shipping! International Shipping with DHL Express is available for all items: Please contact for Quote Mullett Industrial Sales contact info: mark at mullettindustrialsales.com Office: [phone removed by eBay] Also please check out our website for FREE shipping!.
- J467 Tapping Chuck M2-M7 Auto-Reversing Tapping Head Reversible Tapping Clamp - Tapping range: M2-M7. Easy to operate. Adjustable torque. Overload protection.
- NEW Ingersoll 4540850 AW80/40 D'Andrea Tool Head ADAT - MPN: 4540850. We're down to earth, easy to work with people. Model: AW80/40. PRODUCT INFORMATION.
- Kennametal SS075FC188688 Double Angle Collet Chuck Fully Floating Holder SS DA08 - Model: SS075FC188688. Double Angle Collet Chuck. Type: Fully Floating Holder. Tool Holder. make Supersized seem small. The item is exactly as pictured.
- Vintage Tapmatic 30 Tc / Dc Tapping Head
- Reversible Tapping Attachment M 6 - M 16 Tap Capacity MT3 Shank
- Rascamat Module Tap Capacity 5/16"-5/8" R40520F
- High Precision Hand Crank Tapper with 0.6MM-6MM Tap Chuck - 1 x Manual Tapping Machine. 1 x 0.6MM-6MM Tap Chuck. Chuck range: 0.6-6MM. 1 x Chuck key.
- PARLEC 7717CG-3-012 TAP ADAPTERS 1/8'' NPT Tool Holder - We're down to earth, easy to work with people. Fast Dispatch Service.
- ENCO #53000 REVERSIBLE TAPPING HEAD ATTACHMENT Cap. 0 to 1/4"; Max RPM 2000; USA - Model No.: 53000. Max RPM: 2000. (2900) You are purchasing what is shown in photos only. All photos are of the actual product(s) you will receive and are intended to help describe the quality and condition of the piece(s).
- Nikken Coventry ZR-12 Self Reversing Tap Head 3-12 No.4-1/2 UNTESTED - Nikken Coventry ZR-12 Self Reversing Tap Head 3-12 No.4-1/2 UNTESTED / sold AS IS / WHAT YOU GET IS WHAT IS SHOWN.
- Command Cat40 C4T4-0001 Bilz#1 Tension Compression Tapping Chuck Fadel Pull Std
- TSD 508045 1/2" ANSI Tap Extension: 3-1/4" Long, Used in Good Condition - Up for sale is aTSD 508045 1/2" ANSI Tap Extension: 3-1/4" Long, Used in Good Condition. Used in good condition.
- (GS-TER32-D25)Collet Chuck Holder ER32 High Concentricity Adapter Floating Tap - Adapter Chuck: ER32. Made after quenching and hardening, possess high concentricity and good processing effect. Item Type: Collet Chuck holder. Purpose: CNC lathe tapping. Feature: 1. Surface: >0.08mm.
- Procunier 1MT Tapping Head No 0 Min Tap Cap x 1/2 Shank Diam 11006 PARTS/REPAIRS - Tapping Head. Shank Type Straight Shank. Minimum Tap Capacity (mm) M2. Maximum Aluminum Tap Capacity (mm) M6. Maximum Mild Steel Tap Capacity (mm) M4. Rack Morgan Top. PARTS/REPAIR/USED. Unit appears to be in good condition however it may have issues unknown to us.
- Procunier INCOMPLETE Tapping Head No 6 Min Tap Cap x 1/2" Shank Diam 12006 - Tapping Head (INCOMPLETE). Shank Type Straight Shank. Minimum Tap Capacity (mm) M4. Maximum Aluminum Tap Capacity (mm) M12. Maximum Mild Steel Tap Capacity (mm) M8. NEW-OPEN BOX. INCOMPLETE MISSING STEEL BAR and does not include collets.
- BT40 #3 Tap Holder (7.50" Gage) - Sowa (USED)
- Procunier Haut Débit Entaillage Attachement Capacité Laiton 1/4 Acier
- Procunier High-Speed Tapping Attachment Capacity Brass 1/4 Iron 1/4 Steel 3/16
- Hardinge TT .194" Collet Tap Chuck 3/4" Straight Shank Tension Compression - Hardinge TT. 194" Collet Tap Chuck 3/4" Straight Shank. Tension Compression.
- Command CAT40 Tapping Holder 3/4" Capacity C4P5-0001 (Stk72) - (Stk72) Command CAT40 Tapping Holder 3/4" Capacity C4P5-0001.
- Command CAT40 Bilz #1 Rigid Tapping Chuck 3/4" Shank C4P5-0001 (Stk71) - (Stk71) Command CAT40 Tapping Holder 3/4' Capacity, Bilz #1 Rigid Tapping Chuck 3/4" Shank C4P5-0001.
- Procunier High-Speed Tapping Attachment Capacity Brass 1/4 Iron 1/4 Steel 3/16 - Recently removed from working service and guaranteed functional. Cosmetically in fair condition showing moderate to heavier scuffs / scratches / blemishes from previous use. Includes Capacity Brass 1/4 Iron 1/4 Steel 3/16 as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. .
- TACO S-232 Rubber Flex Collet .079" - .177" (2mm - 4.5mm), For Use In HR2 - Rubber Flex Collet. 079" -. 177" (2mm - 4.5mm), For Use In HR2 Tapping Head. TACO S-232. We are experts in applications. If you need inserts for this bar, we can help choose suitable options. S-623 0.630-0.905" 16.0 – 23.0 J462 1.848 0.748 25° 9.
- TACO S-222 Rubber Flex Collet .256" - .394" (6.5mm - 10mm), For Use In HR2 - Rubber Flex Collet. 256" -. 394" (6.5mm - 10mm), For Use In HR2 Tapping Head. TACO S-222. We are experts in applications. If you need inserts for this bar, we can help choose suitable options. S-623 0.630-0.905" 16.0 – 23.0 J462 1.848 0.748 25° 9.
- TACO S-171 Rubber Flex Collet .177" - .256" (4.5mm - 6.5mm), For Use In HR1 - Rubber Flex Collet. 177" -. 256" (4.5mm - 6.5mm), For Use In HR1 Tapping Head. TACO S-171. We are experts in applications. If you need inserts for this bar, we can help choose suitable options. S-623 0.630-0.905" 16.0 – 23.0 J462 1.848 0.748 25° 9.
- TACO S-151 Rubber Flex Collet .040" - .098" (1mm - 2.5mm), For Use In Model HR1 - .040" -. 098" (1mm - 2.5mm) Range, For Use In Model HR1 Tapping Head. TACO S-151. We are experts in applications. If you need inserts for this bar, we can help choose suitable options. S-623 0.630-0.905" 16.0 – 23.0 J462 1.848 0.748 25° 9.
- SPI 74-954-9 2" Tap Holder Quick Change S4 - We are happy to help.
- Cat50 Tapmatic 23953 1In. Tool Holder Loc12220 - MODEL; 23953. SHANK; CAT50. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE.
- Cat50 Tapmatic 23953 1In. Tool Holder Lot Of 2 Loc12216 - MODEL; 23953. SHANK; CAT50. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE. US FIRST BEFORE YOU START A.
- Cat50 Tapmatic 23953 1In. Tool Holder Lot Of 2 Loc12215 - MODEL; 23953. SHANK; CAT50. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE. US FIRST BEFORE YOU START A.
- Cat50 Tapmatic 23983 5.75'' G.l. 5/8 Bore Tool Holder Loc12205 - MODEL; 23983. SHANK; CAT50. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE. US FIRST BEFORE YOU START A.
- (GS-TER25-D20)Collet Chuck Holder Telescoping Floating Tap Tool Holders For - Collet chuck holder have stable structure, excellent performance and long service life. Item Type: Collet Chuck holder. Feature: 1. Purpose: CNC lathe tapping. Adapter Chuck: ER25. If you do not receive our reply within 48 hours, pls.
- Reversible Tapping Attachment M 6 - M 16 Tap Capacity MT2 Shank
- SL16-TER20-80 C16 ER20A Floating Tapping Collet Chuck Holder Straight Shank tool - ER straight shank floating tapping collet holder has longer shank (150L 200L 250L 300L 350L) suitable for deep hole machining. Floating tapping shank retractable ER tapping arbor extension rod on machine.
- BT40-ER32 Floating Tap Holder with 16 Tap Collets Inch & NPT #BT40-ER32T-SET16 - The ER32 Tap Collets includes: #6(1/8"), #8(5/32"), #10(3/16"), #12(7/32"), 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 1/8" NPT, 1/4" NPT. Includes an ER32 spanner.
- BT30-ER32 Floating Tap Holder with 16 Tap Collets Inch & NPT #BT30-ER32T-SET16 - The ER32 Tap Collets includes: #6(1/8"), #8(5/32"), #10(3/16"), #12(7/32"), 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 1/8" NPT, 1/4" NPT. Includes an ER32 spanner.
- Genuine Tapmatic CAT50 to 1" Stubby Tapping Head Holder 23953 Machinist 50 Taper - Gently Used CAT50 to 1" Holder Made in the U.S.A. from Tapmatic. Model No. 23953. Id# Tapmatic c50 23953 5/20 50B.
- Sandvik C6 Capto Quick Change Tapping Chuck #2 Bilz C6-391.60-02 120A - Sandvik / Bilz C6 Capto Tapping Chuck. Part #C6-391.60-02 120A. Tap Adapter Size: #2.
- Sandvik C6 Capto Quick Change Tapping Chuck #1 Bilz C6-391.60-01 090A - Part #C6-391.60-01 090A. Sandvik / Bilz C6 Capto Tapping Chuck. Tap Adapter Size: #1.
- Sandvik C6 Capto Quick Change Tapping Chuck #3 Bilz C6-391.60-03 170A - Sandvik / Bilz C6 Capto Tapping Chuck. Part # C6-391.60-03 170A. Tap Adapter Size: #3.
- Scully-Jones 01135 1/2" Hand Tap Split Sleeve Holder Taper 952686 & TAPIN LOT - Scully-Jones 01135 1/2" Thread Pipe Hand Tap Split Sleeve Holder Taper 952686 & TAPIN LOTMade in USAPlease see all pictures for details. OFFERS ARE WELCOME!All prices are listed competitively lower to compared websites with shipping cost taken into consideration for the buyer’s final cost. Offers are still always welcome!Everything displayed in the listing photographs is included. *minus measuring device displaying item length,size & caliber. Packaging & Shipping is done with pride to exceed the standards and requirements of other shipping companies and businesses to include the USPS, FedEx, UPS, ect.SHIPPING IS USPS PRIORITY MAIL WITH INSURANCE & TRACKING(04)
- ACCUPRO CAT50 QCK-1 IK/CAT50 Taper Shank Rigid Tapping Adapter 64686793 - Taper Size CAT50. Tapping Adapter. Tapping Style Rigid. Shank Type Taper Shank. Minimum Tap Capacity (mm) M3. Maximum Tap Capacity (mm) M12. Rack Aussie Shelf 2.
- Parlec CAT40 Taper Shank Rigid Tapping Adapter #1 #0 to 9/16" Tap Capacity - Tap adapter with Tap to fit .
- Accupro CAT40 Taper Shank Rigid Tapping Adapter #2 5/16 to 7/8" Tap Capacity - 3/16 to 1-3/8″ Tap Capacity, 4-3/4″ Projection, Size 3 Adapter, Quick Change.
- Accupro CAT40 Taper Shank Rigid Tapping Adapter #3 13/16 to 1-3/8" Tap Capacity - 3/16 to 1-3/8″ Tap Capacity, 4-3/4″ Projection, Size 3 Adapter, Quick Change.
- Drill Taper Chuck B16-GT12 Durable M3- Pneumatic Machine Overload Protection - Applicable Chuck: GT12 GT12B TC312 G3. High in hardness, not easy to deform. With overload protection. Feature: 1. This product is used in machine tool to hold the tapping chuck for female thread hole processing.
- Lyndex BT35 Tapper Size 1 Tap Adapter Holder: 7-1/2" OAL - OAL: ~ 7-1/2".
- Safety Return Procunier Lead Screw Tapping Attachment Used
- Jarvis Torqamatic Tapping Head (CTAM #8541) - Jarvis Torqamatic Tapping Head. 2 Morse Taper. Includes 2 Rubber Flex Collets & Wrench.
- Ettco 2-B Tapping Tapper Head Attachment MT 2 Morse Taper Shank - The brown stuff you see at borders are sawdust and dry oil. Was sitting in a cabinet by a belt sander. Used need cleaning.
- Collis& Other MT #4 Morse Taper Shank 1-1/4" Hand Tap Holders Qty.2 (AP11)
- Erickson Cat 40 Safe Drive Tap Holder CV40SD73 Tension Compression Tapping... - Erickson Cat 40 Safe Drive Tap Holder CV40SD73 Tension Compression Tapping Holder. Feel free to check out my other great items for sale!!
- Tapmatic NCR25 Tapping Head With BT35 Holder Max Cap 1/4 M7 Max Rpm 3000 - Tapmatic NCR25 Tapping Head With BT35 Holder Max Cap 1/4 M7 Max Rpm 3000.Tapmatic NCR25 Tapping Head With BT30 Holder Max Cap 1/4 M7 Max Rpm 3000. Feel free to check out my other great items for sale!!!
- Tapmatic NCR-0A Tapping Head #4-1/4 M2.5-M7 Max RPM 3000 With Collis CV40 CAT40 - Tapmatic NCR-0A Tapping Head #4-1/4 M2.5-M7 Max RPM 3000 With Collis CV40 CAT40.Tapmatic NCR-0A Tapping Head #4-1/4 M2.5-M7 Max RPM 3000 With Collis CV40EM 1.3750-1000 CAT40 tool holder sticker and nut is missing on tapmatic holder. Feel free to check out my other great items for sale!!
- Tapmatic NCR-0A Tapping Head #4-1/4 M2.5-M7 Max RPM 3000 With Collis CV40 CAT40 - Tapmatic NCR-0A Tapping Head #4-1/4 M2.5-M7 Max RPM 3000 With Collis CV40EM 1.3750-1000 CAT40 tool holder sticker is missing on tapmatic holder. Feel free to check out my other great items for sale!!
- BT30 ER20 Tension/Compression Tapping head - BT30 ER20 Tension/Compression Tapping toolholder that a ccepts ER20 collets. Good quality and works well on Tormach 1100MX and 770MX mills to smooth minor RPM variations when using rigid tapping. Allows 5mm of extension travel and 5mm of compression travel.
- SL16-TER11-80L C16 Floating Tapping Collet Chuck Holder Straight Shank tool - ER straight shank floating tapping collet holder has longer shank (150L 200L 250L 300L 350L) suitable for deep hole machining. Floating tapping shank retractable ER tapping arbor extension rod on machine.
- Collis Tap Tool No. 70301, MT3 3/4 HT Taper Shank Standard Tapping (M59)
- Collis Tap Tool No. 70405, MT4 1-1/4 HT V9 Taper Shank Standard Tapping (M58)
- SL20-TER16A -100L C20 ER16A Floating Tapping Collet Chuck Holder Straight Shank - ER straight shank extension floating tapping collet holder has longer shank (150L 200L 250L 300L 350L) suitable for deep hole machining. It can reduce the use of lengthened tools, thereby reducing costs and increasing efficiency.
- Collis 3/4" Tap 1.38" Tap Entry Depth MT4 Taper Shank Standard Tapping Driver - Collis 3/4" Tap 1.38" Tap Entry Depth MT4 Taper Shank Standard Tapping Driver. 2-3/8" Projection, 0.59" Tap Shank Diam, 0.442" Tap Shank Square
- Erickson Tools Bm-1-8-4715 5/8" Tap Extension - USED, BUT IN GOOD WORKING CONDITION. Warranty Information 8am-5pm CST.
- Bilz #2 Rigid Tapping Chuck Automotive Shank WF 2/TR 36x2 (Stk37) - (Stk37) Bilz #2 Rigid Tapping Chuck Automotive Shank WF 2/TR 36x2.
- TecNara CAT40 Tapping Chuck 140-024-5 w/ 3/4" Collet (Stk61) - (Stk61) TecNara CAT40 Tapping Chuck 140-024-5 with 3/4" Collet TPD24-3/4.
- Hardinge TT 5/8” Floating Tap holder With 1” Shank Extension - Hardinge TT 5/8” Floating Tap holder.
- Tapmatic Synchroflex Sft50 Rigid Tapping Er20 Collet Chuck Loc11639 - MODEL NUMBER; SFT50. COLLET SIZE; ER20. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE.
- Tapmatic Synchroflex Sft50 Rigid Tapping Er20 Collet Chuck Loc11638 - MODEL NUMBER; SFT50. COLLET SIZE; ER20. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE.
- Tapmatic Synchroflex Sft50 Rigid Tapping Er20 Collet Chuck Loc11637 - MODEL NUMBER; SFT50. COLLET SIZE; ER20. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE.
- Houston Straight flute chucking reamer 533EL6719 43/64 x 12" SSSF - Shows little to no use. Flutes are sharp to the touch.
- Sandvik Synchroflex BT30 - Sandvik bt30 synchroflex tapping. New and unused.
- Fellows 63-31-9677-4 Hydraulic Tapping Head Tool Holder AD-1522903 13D - Location: 13D. Manufacturer: Fellows. Item was removed from a local automotive plant assembly line. It was working when removed and there are no known issues. We are here to help! The sale of this item may be subject to regulation by the Food and Drug Administration and state and local regulatory agencies.
- Unbranded Hydraulic Tapping Head Tool Holder (Like Fellows 63-31-9677-4) 41D - Location: 41D. Item was removed from a local automotive plant assembly line. It was working when removed and there are no known issues. We are here to help! The sale of this item may be subject to regulation by the Food and Drug Administration and state and local regulatory agencies.
- Procunier Tapping Head - PROCUNIER SIZE 3 MODEL E TAPPING HEAD.
- Collis Split Sleeve 3/4" Tap Holder 4 Morse Taper 74420 - THIS IS A COLLIS SPLIT SLEEVE 74420 3/4" TAP HOLDER 4 MORSE TAPER IN EXCELLENT CONDITION.
- SPV Sip Tapping Holder Morse #4 Taper Shank w/ holders SA-2E/NC - SA-2E/NC with Morse no. 4 Taper Shank. Tapping range: M7-M36, 5/16"-1 1/8". Includes manual and carrying case.
- SPV Sip Tapping Holder Morse #4 Taper Shank w/ holders SA-1E/NC - SA-1E/NC with Morse no. 4 Taper Shank. Tapping range: M3-M16, 1/8"-5/8".
- Valenite Tension Compression Tapping Holder 311-51-716 In Command C4E4-1000 BT40 - Valenite Tension Compression Tapping Holder 311-51-716 In Command C4E4-1000 BT40 1" Endmill Holder. Feel free to check out my other great items for sale!!
- Procunier Tapping Head Size No. 1 Style E - Procunier Tapping Head Size No. 1 Style E. Morse Taper Shank. Appears to be in good shape! Feel free to check out my other items for sale!!!
- ASQUITH No 3A HALIFAX TAPPER England quick change tapping head 5MT 5 morse taper - 5MT taper is smooth.
- Accupro CAT40 Taper Shank Rigid Tapping Adapter #3 13/16 to 1-3/8" Tap Capacity - Accupro CAT40 Taper Shank Rigid Tapping Adapter 13/16 to 1-3/8" Tap Capacity, 4-3/4" Projection, Size 3 Adapter, Quick Change.
- Procunier Commander Multi-Drill Tapper Universal Joint Spindle Arm 1.5" X 3" - We are not a distributor of original manufacturer/s and we are not a party to any manufacturer’s warranty that may or may not apply. Great Priced Great Parts.
- SCULLY JONES Morse Taper Shank 1/2" Tap Split Adapter Sleeve, 952685, 01133, EC - SCULLY JONES Morse Taper Shank 1/2" Tap Split Adapter Sleeve, Marked with # 952685, and # 01133. The extension is in excellent condition for the age. It is 3-1/4" overall length. The tap shown is for reference only and NOT included.
- SPI 74-974-7 Change Tapping Adapter Size 2 - We are happy to help.
- SL20-ER16A-100 Floating Tapping Collet Chuck tool Holder Straight Shank - ER straight shank extension floating tapping collet holder has longer shank (150L 200L 250L 300L 350L) suitable for deep hole machining. ▲Mid-end products, higher cost performance, lower price, suitable for small batch processing.
- Reversible Tapping Attachment M 6 - M 16 Tap Capacity MT3 Shank
- Reversible Tapping Attachment M 6 - M 16 Tap Capacity MT2 Shank
- Ziegler 7/16" & M10 Floating Tap Collet Holder 1" O.D. Shank Accepts JT-2 Arbor - We are not a distributor of original manufacturer/s and we are not a party to any manufacturer’s warranty that may or may not apply. Great Parts Great Price.
- Reversible Tapping Attachment M 6 - M 16 Tap Capacity MT2 Shank - GREASE OIL DAILY. RIGHT OR LEFT HAND TAPPING WITHOUT MODIFICATION. Suitable for batch & mass production tapping in components. Suitable for right hand & left hand tapping in blind/through holes. Axial float ensures smooth tapping & better thread profile.
- Reversible Tapping Attachment M 6 - M 16 Tap Capacity MT3 Shank - GREASE OIL DAILY. RIGHT OR LEFT HAND TAPPING WITHOUT MODIFICATION. Suitable for batch & mass production tapping in components. Suitable for right hand & left hand tapping in blind/through holes. Axial float ensures smooth tapping & better thread profile.
- Reversible Tapping Attachment M3 -M 12 With Mt2 Shank
- Reversible Tapping Attachment M3 -M 12 With Mt2 Shank - Available in MT2 Shank. GREASE OIL DAILY. RIGHT OR LEFT HAND TAPPING WITHOUT MODIFICATION. Suitable for batch & mass production tapping in components. Suitable for right hand & left hand tapping in blind/through holes.
- SPi 74-971-3 1" Positive Drive Stub Length Tapping Head Adapter 4" Adapter - We are happy to help.
- Walton Tap Extension, 45037, Style A, 3/8" Size, 5" Length, .206 Sq. Shank, 2Pc - TAP EXTENSION. APPROXIMATE WEIGHT: 1 LBS.
- Parlec CAT50 Numertap 700 Tension Compression Tapping Chuck C50-70TA5 (Stk58) - Gage Projection: 5.5".
- Kennametal CAT50 Type F Safe T/C Tapping Chuck CV50SDF688 (Stk2) - MPN: CV50SDF688. Tapping Type: F. Tapping Range: #0 to 7/8" - 1/16" Pipe to 1/2" Pipe.
- Sandvik CAT50 Bilz #3 T/C Tapping Chuck 391.60-03 63 210A (Stk53) - CAT50 MPN: A390.45-50 63 050M. MPN:391.60-03 63 210A. Connection: Varilock 63.
- Command CAT50 Bilz #3 Rigid Tapping Chuck C6T4-0003 (Stk58) - Collet Type: Bilz #3.
- Carboloy CAT50 ZK24 Tapping Chuck CV50-TH 5.15-0200 (Stk43) - Collet Type: ZK24. Gage Projection: 4.5".
- Sandvik CAT50 Varilock 63 Modular Holder A390.45-50 63 050M (Stk12) - MPN:A390.45-50 63 050M. Connection: Varilock 63. Gage Projection: 50mm.
- Parlec S12-20Ta5 Numertap 200 Tension And Compression Rotating Tapping Head - PARLEC S12-20TA5 NUMERTAP® 200 TENSION AND COMPRESSION ROTATING TAPPING HEAD, STRAIGHT SHANK, SZ 2 ADAPTER, 7/8 IN MAX TAP CAPACITY, 1/2 IN MAX PIPE TAP CAPACITY As you can see in photos it has surface rust and easy clean. Please look at photos for more information. Thank you for looking.
- Ettco 4B Tapper Tapping Head / Attachment 1/4 - 3/4” Tap In Steel Capacity #2MT - Ettco 4B Tapper Tapping Head.
- NIKKEN-COVENTRY TAPPING HEAD ZR-8 with 5 Quick Change Tap Holders & MT2 Shank - 5 Nikken Quick Change Tap Holders. MT2 J33 Shank (Made in Germany).
- SPI 78-421-5 Shank Tapping Head Taper Size JT33 - We are happy to help.
- Sandvik CAT50 Bilz #2 T/C Tapping Chuck 391.60-02 63 145 (Stk51) - CAT50 MPN: A390.45-50 63 050M. MPN:391.60-02 63 145. Connection: Varilock 63.
- Sandvik Varilock 63 Bilz #3 T/C Tapping Chuck 391.60-03 63 210A (Stk47) - Connection: Varilock 63. MPN:391.60-03 63 210A. Tension Compression.
- The Procunier High-Speed Tapping Attachment Size: 2 Style: E - Cast Iron: 3/8".
- Accupro CAT50 Taper Shank Rigid Tapping Adapter 778590 - Taper Size CAT50. Tapping Style Rigid. Shank Type Taper Shank. Adapter Size 1.
- Collet Chuck Holder Floating Tapping Tool Extension Rod For CNC(GS-TER25-D20 ) - Collet chuck holder have stable structure, excellent performance and long service life. Item Type: Collet Chuck holder. Purpose: CNC lathe tapping. Feature: 1. Adapter Chuck: ER25. If you do not receive our reply within 48 hours, pls.
- Collet Chuck Holder Floating Tapping Tool Extension Rod For CNC(GS-TER25UM-D25 ) - Collet chuck holder have stable structure, excellent performance and long service life. Item Type: Collet Chuck holder. Purpose: CNC lathe tapping. Feature: 1. Adapter Chuck: ER25. If you do not receive our reply within 48 hours, pls.
- Jacobs Chuck 441-J9 #10-1/2 Tap Capacity Tap Holder - For Sale - Jacobs Chuck 441-J9. #10 to 1/2 Tap Holder. Used and shows normal signs of wear. Being sold as is. We only buy and use new boxes when we have no other choice. We believe the little things will help preserve our world for future generations.
- Procunier #3 Morse Taper #2 Type E High Speed Tapping Attachment - Morse Taper #2. 5/8 Cast Iron.
- Torqomatic Tapping Head (Appears to be Jarvis no tag) 5/16" to 5/8" Tap - 5/16" to 5/8" Tap.
- Torqomatic Tapping Head (appears to be Jarvis ?) Capacity 3/16" to 5/16" tap - Torqomatic Tapping Head (appears to be Jarvis ?). Capacity 3/16" to 5/16" tap.
- Jarvis Torqomatic Tapping Head Capacity 0-10
- Tapping Head M20 Taper Shank for Reversing Tapping Head 354066 - We are happy to help.
- PROCUNIER #1E HIGH-SPEED TAPPING HEAD ATTACHMENT w/ 2MT SHANK - #11002 - Made in the USA by Procunier Safety Chuck Co. Series: 11002. Minimum Tapping Capacity: #0. Maximum Tapping Capacity: #10 Steel / 1/4" Aluminum. Shank: 2 Morse Taper. Maximum Speed: 3,000 RPM.
- MT2-GT12-110 tapping collet set MTB2 Tool Holder workholding + 7pcs collets - MT2-GT12-110 tapping collet set MTB2 Collet Chuck Tool Holder workholding. tap collet: M4 Φ 4 3.15. 5pcs BT40 APU16 120 CNC Milling Chuck Holder Milling Workholding BT40 APU16 120 152639554853. Holder : MT2-GT12-110.
- MT2-GT12-110 tapping collet set MTB2 Tool Holder workholding with 7pcs collets - MT2-GT12-110 tapping collet set MTB2 Collet Chuck Tool Holder workholding. tap collet: M4 Φ 4 3.15. 5pcs BT40 APU16 120 CNC Milling Chuck Holder Milling Workholding BT40 APU16 120 152639554853. Holder : MT2-GT12-110.
- MTA2-GT12-110 tapping collet set MT2 Tool Holder workholding with 7pcs collets - MTA2-GT12-110 tapping collet set MTA2 Collet Chuck Tool Holder workholding. Holder :MTA2-GT12-110tap collet: M4 Φ 4 3.15. 5pcs BT40 APU16 120 CNC Milling Chuck Holder Milling Workholding BT40 APU16 120 152639554853.
- MTA2-GT12-110 tapping collet set MT2 Tool Holder workholding + 7pcs collets - MTA2-GT12-110 tapping collet set MTA2 Collet Chuck Tool Holder workholding. tap collet: M4 Φ 4 3.15. 5pcs BT40 APU16 120 CNC Milling Chuck Holder Milling Workholding BT40 APU16 120 152639554853. Holder :MTA2-GT12-110.
- Procunier 3/4" Straight Shank Diam Tapping Chuck/Holder 57440 - Collet Series 4F. Shank Type Straight Shank. Through Coolant No.
- J467 tapping chuck M2-M7 (5/64-1/4) automatic reversing head drilling machine - Tapping range: M2-M7. Easy to operate. Adjustable torque.
- Ettco 4B tapper/tapping head #1/4 to 5/8" capacity - Ettco 4B tapper, #1/4 to 5/8" capacity. Turns smoothly and has nice action.
- Jarvis Torqmatic tapping head #0 to #10 Model 102 MT2 - Jarvis 102 tapping head, 0 to #10 capacity. Turns smoothly and has nice action. MT2 taper mount.
- BOYAR SCHULTZ 00RR Knurling Tool 5/8”Shank - BOYAR SCHULTZ 5/8”Shank.
- BOYAR SCHULTZ 00DRH-S Tool Tap Holder 5/8”Shank - BOYAR SCHULTZ 00DRH-S Tool Tap Holder 5/8”Shank.
- BOYAR SCHULTZ 00AP Tool Tap Holder 5/8”Shank - BOYAR SCHULTZ 00AP Tool Tap Holder 5/8”Shank.
- Narex Bt50 Tapping Chuck Bilz Size We3 Tap Holders 15/16"-1-1/8" ***Vgc***
- Seibert & Sons 23004S Tap Chuck JT #2 Short No Collet - Thanks for looking. For all of your industrial equipment needs contact.
- Morris Tooling England 12.4078 B Quick ChangeTool Holder - Thanks for looking. For all of your industrial equipment needs contact.
- Collis 3/4" Tap 1.38" Tap Entry Depth MT3 Taper Shank Standard Tapping Driver - Outside Shank Taper Size MT3. Outside Shank Type Taper Shank. Tap Size 3/4. Driver Design Standard. Date Sept 08 21.
- BT40 Tapping Heads + Collets Package
- SPV SA-2E Tapping Chuck & Collets Tension & Compression 1½" Sh. Machinist Tap - SA-2E Adjustable Tapping Head & Twelve Collets Quality Made in Sweden by SPV. SA-2E Has a tap range of M7-M36 or 5/16"-1⅛" when paired with correct collets. SPV SA-2E 9/3 Shelf w.b.
- SL20-TER20-80L Straight handle telescopic ER tapping chuck Taps chucks HOLDER - {{aboutus}}. {{titleaboutus}}.
- SL20 TER20 80L ER20 Floating Tapping Collet Chuck Holder Straight Shank - Collet series: ER20-A. Shank: 20mm. Shank length: 80mm. Holder precision: 0.008. total length: 115mm. Clamping range: 1-13mm.
- Ettco Emrick 3B Sensitive Tapping Attachment - Good used tool.
- BT40 GT12 110 full set of overload protection tapping tool holder BT40 GT24 +box - BT40-GT12-110L Holder Milling Workholding BT40 +7PCS GT12 collets. tap collet: GT12-M4 Φ 4 3.15. Holder :BT40-GT12-110. High quality, high precision.
- SL32-TER32-80L Straight handle telescopic ER tapping chuck Taps chucks HOLDER
- SL20 TER16 80L C20 ER16A Straight Shank Floating Tapping Collet Chuck Holder
- Value Collection 12.50mm Shank Diameter, Tapping Head Die Holder For Use with... - Value Collection 12.50mm Shank Diameter, Tapping Head Die Holder For Use with Reversible Tapping Heads
- Up to 2 Parlec Numertap 100 Positive 7/16" Tap Size Tap Holders 10-043 - Parlec was established in 1948.
- Up to 2 Parlec Numertap 100 Positive 5/16" Tap Size Tap Holders 10-31 - Parlec was established in 1948.
- Up to 4 Parlec Numertap 100 Positive #12 Tap Size Tap Holders 10-#12 - Parlec was established in 1948.
- Up to 8 Parlec Numertap 100 Positive #10 Tap Size Tap Holders 10-#10 - Parlec was established in 1948.
- Up to 6 Parlec Numertap 100 Positive #8 Tap Size Tap Holders 10-#8 - Parlec was established in 1948.
- Up to 6 Parlec Numertap 100 Positive Tap Size (IN): #0 - 6 Tap Holders 10-#0-6 - Parlec was established in 1948.
- Up to 3 Parlec Numertap 100 Positive 9/16" Tap Holders No. 10-056 - Parlec was established in 1948.
- Techniks CAT 40 MicroFLAOT #1 CNC Tap Chuck+ER16 Adapter,Collet Set-Complete Kit - 23410-ER16 ER16 MicroFLOAT #1 Adapter 2.16" 1.10". 79". Techniks ER 16 Tap Capacity #6 to 3/8" Rigid Tap Collet Set, Part# 05320-9IS. Techniks CAT 40 MicroFLOAT #1 CNC Tap Chuck, Part# 23400-40CAT. Techniks ER 16-A Hex Collet Chuck Wrench, Part# 04609.
- Techniks CAT 40 MicroFLAOT #1 CNC Tap Chuck+ER 16 Adapter-295%+ Productivity - Techniks CAT 40 MicroFLOAT #1 CNC Tap Chuck, Part# 23400-40CAT. Techniks ER 16-A Hex Collet Chuck Wrench, Part# 04609. Techniks ER 16 MicroFLOAT #1 CNC Tap Adapter, Part# 23410-ER16. Tap Capacity #6 to 3/8".
- Sandvik Coromant Straight Shank Tool Holder, 1 1/2” Shaft, w 10-15mm Flex Collet - Tapmatic NSM6 Straight Shank Tap Holder. Condition is "Used". Visit our store. We combine shipping when possible.Includes S 243 Rubber-Flex Collet, 10-15mmTap Range: #10-3/4”, M5-M18Shank Dia: 1”OAL: 6.”
- Accupro Cat50 Shank Tapping Chuck & Holder M8 to M20 Capacity 84532720 - Cat50 Shank Tapping Chuck & Holder M8 to M20 Capacity. CAT50 Taper Shank Tension & Compression Tapping Chuck. 1/4” to 7/8” Capacity. Industry Recycles. 12.50mm Conpression.
- Sandvik M7 - M16 Tap Tool Holder Tapping Head Adapter Rubber Flex Collet C4-391 - SANDVIK TAP CHUCK. It Takes a Rubber Flex collet but no collets are with it. C4 Capto connection.
- NEW! LYNDEX W10R5-0875(C) Cat50 1”-Tapping Chuck_WARRANTY_FAST SHIPPING! - LYNDEX W10R5-0875(C) Cat50 1”-Tapping Chuck.
- New Sandvik Coromant A392.4560B-50 03 112 Quick Change Tapping Chuck - Adaptive interface workpiece direction (ADINTWS)Collet DIN6345 (Rubberflex) -size J46x. Tap range max (TRMAX)1 1/8. Connection retention knob thread size (CRKS)1"-8. Rotational speed maximum (RPMX)8,000 1/min.
- The Walton Co. 5" Tap Extension for 5/16" M7 M8 Taps 45031 - The Walton Co. 5" Tap Extension for 5/16" M7 M8 Taps 45031. Shipped with USPS First Class.
- Tapmatic SPD-3 Reversible Tapping Attachment #0-1/4" with 5/8" Straight Arbor - Tapmatic SPD-3 Reversible Tapping Attachment #0-1/4" with 5/8" Straight Arbor. It is used and has nicks and scratches but is in good condition overall. Please look at pictures in detail and ask questions before bidding.
- Universal DeVlieg 1/2" Capacity Acura-Flex Collet Chuck W/ 1" Straight Shank USA - Up for sale is a Universal/DeVlieg 1/2" Capacity Acura-Flex Collet Chuck W/ 1" Straight Shank. Light scuffs and marks from use. Works as it should.
- Universal DeVlieg Bilz #1 Tension Compression Quick Change Tapping Chuck WE 1 - Up for sale is a Universal/DeVlieg. Model 151000. Bilz #1 Tension Compression Quick Change Tapping Chuck for WE-1 adaptors. Has a 3/4" shank. Light scuffs and marks from use. Works as it should.
- Tapmatic Rct 85 Tapping Head Er25 Collet
- Carboloy Systems BT40-TH4.80-0200 Quick Change Tension Tapping Collet Chuck - BT40 Shank. Carboloy Systems Quick Change Tension Tapping Collet Chuck. To Find Our Phone Number. 4.0" Gage Length.
- Pioneer 1.0" Straight Shank ER 20 Precision Syncronization ER Tapping Holder - (For tapping speeds up to 15,000 RPM’s. Minimal length compensation in both Tension and Compression compensates for small pitch differences between the spindle and tap reducing friction on the tap flanks).
- Pioneer HSK 63A ER 20 x 6.68" Precision Syncronization ER Tapping Holder - (For tapping speeds up to 15,000 RPM’s. Minimal length compensation in both Tension and Compression compensates for small pitch differences between the spindle and tap reducing friction on the tap flanks).
- Pioneer Dual Contact CAT 40 ER 20 x 4.43" Precision Sync ER Tapping Holder - (For tapping speeds up to 15,000 RPM’s. Minimal length compensation in both Tension and Compression compensates for small pitch differences between the spindle and tap reducing friction on the tap flanks).
- Pioneer CAT 40 ER 20 x 4.43" Precision Syncronization ER Tapping Holder - (For tapping speeds up to 15,000 RPM’s. Minimal length compensation in both Tension and Compression compensates for small pitch differences between the spindle and tap reducing friction on the tap flanks).
- Universal DeVlieg Bilz #1 Tension Compression Quick Change Tapping Chuck WE 1 - Up for sale is a Universal/DeVlieg. Morel 151002. Bilz #1 Tension Compression Quick Change Tapping Chuck for WE-1 adaptors. Has a 1" shank. Light scuffs and marks from use. Works as it should.
- Techniks 1" S.S MicroFLAOT #1 CNC Tap Chuck+ER 16 Adapter-295%+ Productivity - Techniks 1" Straight Shank MicroFLOAT #1 CNC Tap Chuck, Part# 23400-INC1. Techniks ER 16-A Hex Collet Chuck Wrench, Part# 04609. Techniks ER 16 MicroFLOAT #1 CNC Tap Adapter, Part# 23410-ER16. Tap Capacity #6 to 3/8".
- Techniks 1" S.S MicroFLAOT #1 CNC Tap Chuck+ER16 Adapter,Collet Set-Complete Kit - 23410-ER16 ER16 MicroFLOAT #1 Adapter 2.16" 1.10". 79". Techniks ER 16 Tap Capacity #6 to 3/8" Rigid Tap Collet Set, Part# 05320-9IS. Techniks 1" Straight Shank MicroFLOAT #1 CNC Tap Chuck, Part# 23400-INC1.
- Pioneer HSK 63A ER 32 x 7.25" Precision Syncronization ER Tapping Holder - (For tapping speeds up to 15,000 RPM’s. Minimal length compensation in both Tension and Compression compensates for small pitch differences between the spindle and tap reducing friction on the tap flanks).
- Pioneer 1.0" Straight Shank ER 32 Precision Syncronization ER Tapping Holder - (For tapping speeds up to 15,000 RPM’s. Minimal length compensation in both Tension and Compression compensates for small pitch differences between the spindle and tap reducing friction on the tap flanks).
- Pioneer CAT 40 ER 32 x 5.00" Precision Syncronization ER Tapping Holder - (For tapping speeds up to 15,000 RPM’s. Minimal length compensation in both Tension and Compression compensates for small pitch differences between the spindle and tap reducing friction on the tap flanks).
- Pioneer Dual Contact CAT 40 ER 32 x 5.0" Precision Sync ER Tapping Holder - (For tapping speeds up to 15,000 RPM’s. Minimal length compensation in both Tension and Compression compensates for small pitch differences between the spindle and tap reducing friction on the tap flanks).
- Collis Tool 1" Tap, 1.63" Tap Entry Depth, MT3 Taper Shank Standard Tapping D... - Collis Tool 1" Tap, 1.63" Tap Entry Depth, MT3 Taper Shank Standard Tapping Driver 2-5/16" Projection, 1-1/8" Tap Shank Diam, 0.843" Tap Shank Square
- CAT50 Valenite TAPPING TENSION & COMPRESSION HEAD w/ Bilz QC TAP HOLDER 1-1/4" - CAT50 Valenite Tapping Tension & Compression Head with Quick Change Bilz Tap Holder (1-1/4") & Tap. 1 Quick Change Tap Holder No.: Bilz WES-3 1.1/4" (Made in Germany). 1 Tapping Tension & Compression Head: Valenite 313-53-50CAT.
- Lot of Machinist Bore Tool Holders Inspection Mixed Lot Of Tooling - We're down to earth, easy to work with people. Model: Does Not Apply. MPN: Does Not Apply. PRODUCT INFORMATION.
- JAPAN! TOOL IMPORTERS RELEASING TAP HOLDER w/ 5/8" SHANK - #T-00 - This is a Releasing Tap Holder w/ 5/8" Shank. Made in Japan, Distributed by Tool Importers, Inc. Body OD: 1.45". Overall Length: 3-7/16".
- Ettco-Emrick Tapping Attachment Model 3-B Lot 2 - Model 3-B. (LL-B-Box 103).
- Ettco-Emrick Tapping Attachment Model 3-B Lot 1 - Model 3-B. (LL-B-Box 103).
- Cst Tapmatic 1/2 Cap Er20 Collet Tapping Head Rdtic50 Loc5539 - MODEL; RDTIC50. COLLET SIZE; ER20. CAP; 1/2". US FIRST BEFORE YOU START A. IF YOU HAVE A ISSUE OR NEED TO. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE.
- Cst Tapmatic 1/2 Cap Er20 Collet Tapping Head Rdtic50 Loc5604 - MODEL; RDTIC50. COLLET SIZE; ER20. CAP; 1/2". US FIRST BEFORE YOU START A. IF YOU HAVE A ISSUE OR NEED TO. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE.
- Cst Tapmatic 1/2 Cap Er20 Collet Tapping Head Rdtic50 Loc5843 - MODEL; RDTIC50. COLLET SIZE; ER20. CAP; 1/2". US FIRST BEFORE YOU START A. IF YOU HAVE A ISSUE OR NEED TO. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE.
- Bilz Tapping Adapter CAT50 Coolant Thru 0 to 9/16" Tap Cap 117012 - Model: 117012. Taper Size CAT50. Tapping Style Rigid. Minimum Tap Capacity (mm) M3. Maximum Tap Capacity (mm) M12. Through Coolant Yes.
- BT30 ER20 Tapping head - BT30 ER20 Tapping toolholder head that a ccepts ER20 collets. Good quality and works well on Tormach 1100MX and 770MX mills to smooth minor RPM variations when using rigid tapping.
- Procunier No. 3 High Speed Tapping Head Tapping Attachment Style: E - Cast Iron - 5/8". WE'LL DO OUR VERY BEST TO MAKE IT SO! Brass - 3/4". SPEC'S SUBJECT TO FINAL INSPECTION.
- Parlec C40-20TR4 Shank Cat 40 Rigid Tapping Chuck And Holder 5/16 C40-20TR4 New
- Parlec B40-88TA3 BT40 Quick Change Tension & Compression Tap Holder - You are getting everything shown in the pictures. If it is not in the pictures it is not included.
- Valenite TMS-311-51-35BT BT35 Tapping Tool Holder
- Parlec Inc. CAT 50 Tapping Tool Holder Part #: C50-22TA4 - Parlec Inc. CAT 50 Tapping Tool Holder. WE'LL DO OUR VERY BEST TO MAKE IT SO! SPEC'S SUBJECT TO FINAL INSPECTION. Part #: C50-22TA4.
- BIG Auto Tapping Milling Tool Holder Part #CV50-ATE24-5.510 - WE'LL DO OUR VERY BEST TO MAKE IT SO! SPEC'S SUBJECT TO FINAL INSPECTION. Part #: CV50-ATE24-5.510.
- 1 Pc. #1 FLOATING 50/50 TENSION & COMPRESSION TAP HOLDER USA - 1 Pc. #1 FLOATING 50/50 TENSION & COMPRESSION TAP HOLDER USA. Condition is "New". Shipped with USPS Priority mail.
- GT24-M12 9×7.1 tapping collet Tool Holder workholding MT2 GT24 Drill Taper Chuck - Other tap collet(not include): GT24 M10 Φ 8×6.3. GT24 M16 Φ 12.5x10.0. The tapping capacity of the tapping machine is M3,M4,M5,M6-8,M10,M12. This product is used for tapping chuck with tap for machining internal thread hole on machine tool.
- Used Tapmatic Ncr0A Max Cap 1/4 Or M7 3000 Rpm Max - 3000 RPM MAX. MAX CAP 1/4.
- New Richmill CT40-RTF14-2 CAT40 Rigid Type CT Tap Holder
- Spv Tap Holder Tk Type 3/8" Tap Shank
- NEW Mapal 30353387 MN5223-07-K Tool Holder - MPN: 30353387. Fast Dispatch Service. We're down to earth, easy to work with people.
- Alps Tool WE2 Quick Live Tool Tap Holder T32036B02 Mori Seiki Bilz Lyndex #2 - No knicks, gouges, rust or engravings. Works as it should.
- Tapping Chuck Tapping Mandrel With Telescopic Collet CNC Machine Tool Holder - Retractable chuck design can offset asynchronous shaft speed during tapping, which can effectively prevent twisting of the tap during tapping. Wide applicability, can be used in CNC machine tools, milling machines, engraving machines, tapping machines and other machine tools.
- Telescopic Collet CNC Tapping Chuck With Machine Tool Tapping Arbor - Retractable chuck design can offset asynchronous shaft speed during tapping, which can effectively prevent twisting of the tap during tapping. Wide applicability, can be used in CNC machine tools, milling machines, engraving machines, tapping machines and other machine tools.
- Lyndex Hsk40A-Er32-80 Nsnp - COLLET CHUCK.
- Brown & Sharpe Non Releasing Tap Holder 5/8 Shank - Brown & Sharpe Non Releasing Tap Holder 5/8 Shank. Condition is Used. Shipped with USPS First Class. 711-100-400. 5/8 shank
- Mazak SQT/QTN 15m/18m/200m/250m Radial Milling Holder
- New Ingersoll 2913228 ING Tool Holder Extension 1.14" X 6.75" S125MOD16SA-90 - Ingersoll 2913228 ING Tool Holder 1.14" X 6.75" New, Unused in Open box.
- Eastern Tube & Tool Company Inc Drill Press Tapper , No. 2 - Small orders are no problem. Joseph Fazzio, Inc. Surplus Division. Condition: Used. Your Best Work Starts Here™. Be sure to add us to yourfavorites list !
- GT12-M8 tapping collet Tool Holder workholding with MT2 GT12 Drill Taper Chuck - Other tap collet(not include):M4 Φ 4 3.15. The tapping capacity of the tapping machine is M3,M4,M5,M6-8,M10,M12. This product is used for tapping chuck with tap for machining internal thread hole on machine tool.
- Tapmatic R3 tapping head 0-1/4" (6mm) Capacity 6JT arbor 3MT shank
- SL20-TER16M-80L ER16M 80mm Floating Tapping Collet Chuck Holder Straight Shank - ER collet:ER16M. ER straight shank extension floating tapping collet holder has longer shank (150L 200L 250L 300L 350L) suitable for deep hole machining. total length:80mm. ▲Mid-end products, higher cost performance, lower price, suitable for small batch processing.
- Enco 5300 Tapping Head 1/4 " Cap W. 5/8 " S
- SL20 TER20-80L ( C20-TER20 ) Floating Tapping Collet Chuck Holder Straight Shank - ER straight shank extension floating tapping collet holder has longer shank (150L 200L 250L 300L 350L) suitable for deep hole machining. Collet series: ER20-A. Shank: 20mm. Shank length: 80mm. Holder precision: 0.008.
- Universal Engineering Tap Driver Chuck: 3/8-7/8 Hand Range 1-1/4" Straight Shank - Includes a 5/8" collet, Universal Engineering #15732. Used in good condition. Up for sale: Universal Engineering Tap Driver Chuck: 3/8-7/8 Hand Range 1-1/4" Straight Shank.
- TAPMATIC 0 to 1/4" (M1.4-M7) TAPPING HEAD ATTACHMENT w/ 1" SHANK - #NCR0A - Model #: NCR0A. Made in the U.S.A. by Tapmatic. Flex Collet Size Included.100" to. 176".
- TAPMATIC 0 to 1/4" (M1.4-M7) TAPPING HEAD ATTACHMENT w/ 1" SHANK - #NCR0A - Model #: NCR0A. Made in the U.S.A. by Tapmatic. Flex Collet Size Included.100" to. 176".
- TAPMATIC 0 to 1/4" (M1.4-M7) TAPPING HEAD ATTACHMENT w/ 1" SHANK - #NCR0A - Model #: NCR0A. Made in the U.S.A. by Tapmatic. Flex Collet Size Included.177" to. 255".
- Command Full Range Multi-Torque Tapper Tapping Head: Morse Taper #2 (2MT) Drive - Up for sale: Command Full Range Multi-Torque Tapper Tapping Head: Morse Taper #2 (2MT) Drive.
- OmegaDrill Tap Extractor Drill Set, 5/64" 1/8" 3/16" 1/4" Drill Sizes - OmegaDrill 5/64 to 1/4" Drill Size, Tap Extractor Drill Set. 7 Pieces Including 4 drills, 2 Picks, 1 Pin Vice. Works on spiral, forming as well as straight fluted taps. Omegadrill OD-SET1 #4-1/2" & M3-M12 4 Pc Tap Extractor Set.
- Value Collection 10mm Shank Diameter, Tapping Head Die Holder For Use with Re... - Value Collection 10mm Shank Diameter, Tapping Head Die Holder For Use with Reversible Tapping Heads
- Vdi 30 Tapping Head Angst Pafix 35-2015
- Iscar 04539028, 3/4" Straight Shank Dia Tapping Chuck Holder - P/N 04539028. Type: Straight Shank Tapping Chuck Holder. Collet Series: ER16. Shank Dia: 3/4". Nose Dia: 1.1020". Min Tap Cap: #6. Max Tap Cap: 3/8".
- Used Collis #3Mt Split Sleeve Tap Driver 1/4" P.t. 73450 - PART# 73450.
- CAT40-ER32 Floating Tap Holder with 16 Tap Collets Inch & NPT #CAT40-ER32T-SET16 - The ER32 Tap Collets includes: #6(1/8"), #8(5/32"), #10(3/16"), #12(7/32"), 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 1/8" NPT, 1/4" NPT. Includes an ER32 spanner.
- CAT40-ER32 Floating Tap Holder & 12 metric tap collets & wrench CAT40-ER32-TM12 - CAT40-ER32 tap holder Draw Bar Thread: 5/8" -11. 3/8 compression travel via adjustable internal spring.
- TAPMATIC 0-1/2" (M12) TAPPING HEAD ATTACHMENT w/ CAT40 SHANK - #NCR1A - Model #: NCR1A. Made in the U.S.A. by Tapmatic. Shank: CAT40. Capacity: 0-1/2" (M12).
- Accupro CAT40 Taper Shank Rigid Tapping Adapter - Accupro CAT40 Taper Shank Rigid Tapping Adapter 13/16 to 1-3/8" Tap Capacity, 4-3/4" Projection, Size 3 Adapter, Quick Change
- New CNC Drilling Tapping Machine Part BT30 Tool Holder Clamp Tool Holder Claw - Model: BT-30. Color: Silver. Size: As the picture shows.
- Tecnara 240-012-4 Tool Holder - Gate Valves. Knife Gate Valves. Needle Valves. Category:Tool Holders. Fuse Holder. Tool Storage. Solenoid Coils. Shock Absorbers.
- Lot "Tt" Cma45 Tension & Compression Holder With 6 Extended Range Tap Collets - 6 COLLETS INCLUDED HOLDER IS A CINCINNATI MILLICRON 45 STYLE TENSION & COMPRESSION. SIZE: 1-5/8", PART# 16322. 1-1/4"P, PART# 16327. 2"P, PART# 16330.
- Bt45 Lyndex Tg100 Collet Chuck Tool Holder 3 1/2 Projection Tg 100 Bt 45 - BT45 COLLET CHUCK TOOL HOLDER. Manufacturer: LYNDEX. YOU ARE PURCHASING THE PICTURED. SIZE & LABELING.
- Procunier 3 EF Tapping Attachment Cap. brass 3/4, cast iron 5/8", steel 1/2" - View all photos. Inventory #.
- Accupro CAT50 Taper Shank Rigid Tapping Adapter - Accupro CAT50 Taper Shank Rigid Tapping Adapter #0 to 9/16" Tap Capacity, 3-3/8" Projection, Size 1 Adapter, Quick Change
- 6-40 Tap 6-32 ZIEGLER Floating Tapping Head Tool Holder Collet Mill Chuck - There is a #6 and a Letter U on it and the numbers 15718. Here we have aNice used collet most likely for aFloating Tapping head.
- Smith Tool ER-32 Collet 9mm 11/32" New Open Box 9-8 SA-32-90-UP 92358161 (2)
- Bt45 Tapping Head Tool Holder Tension Compression Tapping Holds Collet Nt05 Xtc1 - THIS WILL HOLD A LYNDEX NT05 STYLE TAP COLLET (NOT SHOWN) OR A COMMAND XTC1 STYLE TAP COLLET (NOT SHOWN). TOOL HOLDER. THERE IS NO LABELING ON THIS TOOL HOLDER. ITEM TITLE. LOCATION: WB7-4-4-11. YOU ARE PURCHASING THE PICTURED.
- Tecnara Bt45 245-012-4 Tension Compression Tapping Tool Holder Cnc Mill Tooling - Manufacturer: TECNARA. TECNARA 245-012-4. SOLD BY M & J TOOLING LLC. TOOL HOLDER. YOU ARE PURCHASING THE PICTURED. / LABELING PRODUCT SPECIFICATIONS AND / OR LABELING.
- Bt45 Collis Tension Compression Tapping Head Tool Holder 67171 #1 #2 T/C B3 Usa - COLLIS 67171 45BT #1 #2 T/C B3 USA. Manufacturer: COLLIS. TOOL HOLDER. ITEM TITLE. LOCATION: WB7-4-4-10. PRODUCT SPECIFICATIONS AND / OR LABELING.
- Nikken Bt45 M3 To M12 Or 1/8" To 1/2" Tension Compression Tapping Tool Holder - Manufacturer: NIKKEN. NIKKEN M3 M12 U 1/8 U 1/2. TOOL HOLDER. PRODUCT SPECIFICATIONS AND / OR LABELING YOU ARE PURCHASING THE PICTURED. / LABELING SKU: MH0273HM.
- 70mm Mazak 53468010200 VDI 40 Live Offset Head Tapping Tool Holder lot#20
- Collis Tool 1/4" Tap, 31/32" Tap Entry Depth, MT1 Taper Shank Split Sleeve Ta... - Collis Tool 1/4" Tap, 31/32" Tap Entry Depth, MT1 Taper Shank Split Sleeve Tapping Driver 3/16" Projection, 0.255" Tap Shank Diam, 0.191" Tap Shank Square
- Nikken Z-12 - 90 Tool Holder Tap Collet Chuck Tapper - Nikken Coventry collet ZK12 - U7/16".
- Parlec Tapping Chuck & Holder CAT50 Through Coolant No 6 to 1-5/8" C50-77TR4C - Taper Size CAT50. Tapping Style Rigid. Minimum Tap Capacity (mm)M5. Maximum Tap Capacity (mm)M33. Through CoolantYes.
- Accupro BT40 Taper Shank Rigid Tapping Adapter - Accupro BT40 Taper Shank Rigid Tapping Adapter 9/16" Max Tap Capacity, 3-3/4" Projection, Size 1 Adapter, Quick Change
- L0516B18-6Pcs (ISO M5-M16) Set B18 Taper Mounted Quick Change Tap Collet Chuck - 1 x Tap Holder :L0516B18. Suitable for Quick Change tap collet type: L-dia.28 (Including 6pcs tap collet,list as below). Taper Mounted :B18. 1 xM16 Tap Collet ------for ISO Standard M16 Tap(Tap shank diam=12.5mm,Tap square size=10x10mm).
- L0620B18-6Pcs (ISO M6-M20) Set B18 Taper Mounted Quick Change Tap Collet Chuck - 1 x Tap Holder :L0620B18. Suitable for Quick Change tap collet type: L-dia.28 (Including 6pcs tap collet,list as below). Taper Mounted :B18. How to confirm these tap collet whether match you tap or confirm your tap whether ISO Standard ?.
- L0312B16-6Pcs (ISO M3-M12) Set B16 Taper Mounted Quick Change Tap Collet Chuck - 1 x Tap Holder :L0312B16. Suitable for Quick Change tap collet type: L-dia.28 (Including 6pcs tap collet,list as below). Taper Mounted :B16. 1 xM12 Tap Collet -----for ISO Standard M12 Tap(Tap shank diam=9mm,Tap square size=7.1x7.1mm).
- B18-G0312-6Pcs (ISO M3-M12) Set Torque Control Tap Holder With Taper Mounted B18 - Taper Mounted : B18. Spindle conicity Standard:Taper Mounted :B18. 1 xM12 Tap Collet -----for ISO Standard M12 Tap(Tap shank diam=9mm,Tap square size=7.1x7.1mm). 1 x M3 Tap Collet ------for ISO Standard M3 Tap(Tap shank diam=3.15mm,Tap square size=2.5x2.5mm).
- B16-G0312-6Pcs (ISO M3-M12) Set Torque Control Tap Holder With Taper Mounted B16 - Taper Mounted : B16. Spindle conicity Standard:Taper Mounted :B16. 1 xM12 Tap Collet -----for ISO Standard M12 Tap(Tap shank diam=9mm,Tap square size=7.1x7.1mm). 1 x M3 Tap Collet ------for ISO Standard M3 Tap(Tap shank diam=3.15mm,Tap square size=2.5x2.5mm).
- Straight Shank 25mm C25-G0312-6Pcs (ISO) Set Tension &Compression Tap Holder - C25-G0312-6Pcs(ISO) Set Tension and Compression Tap Holder Straight Shank 25MM. Tapping Range: M3-M12(ISO Standard Tap). 1 x M3 Tap Collet ------for ISO Standard M3 Tap(Tap shank diam=3.15mm,Tap square size=2.5x2.5mm).
- MTB4-G0312-6Pc (ISO)Set Morse 4#Taper M16Thread Tension &Compression Tap Holder - Morse 4# Taper Shank With M16 Draw bar thread. Spindle conicity Standard: MTB3 Morse 3# Taper. MTB4-G0312-6Pcs(ISO) Set Tension and Compression Tap Holder Morse4# Taper Shank with M16 Thread. Tapping Range: M3-M12(ISO Standard Tap).
- MTB3-G0312-6Pc (ISO)Set Morse 3#Taper M12Thread Tension &Compression Tap Holder - Spindle conicity Standard: MTB3 Morse 3# Taper. MTB3-G0312-6Pcs(ISO) Set Tension and Compression Tap Holder Morse 3# Taper Shank with M12 Thread. Morse 3# Taper Shank With M12 Draw bar thread. Tapping Range: M3-M12(ISO Standard Tap).
- MTA4-G0312-6Pcs (ISO M3-M12) Set Morse 4#Taper Tension &Compression Tap Holder - Spindle conicity Standard: MTA4 Morse 4# Taper. MTA4-G0312-6Pcs(ISO) Set Tension and Compression Tap Holder Morse 4# Taper Shank. 1 xM12 Tap Collet -----for ISO Standard M12 Tap(Tap shank diam=9mm,Tap square size=7.1x7.1mm).
- MTA3-G0312-6Pcs (ISO M3-M12) Set Morse 3#Taper Tension &Compression Tap Holder - Spindle conicity Standard: MTA3 Morse 3# Taper. MTA3-G0312-6Pcs(ISO) Set Tension and Compression Tap Holder Morse 3# Taper Shank. 1 xM12 Tap Collet -----for ISO Standard M12 Tap(Tap shank diam=9mm,Tap square size=7.1x7.1mm).
- MTA2-G0312-6Pcs (ISO M3-M12) Set Morse 2#Taper Tension &Compression Tap Holder - Spindle conicity Standard: MTA2 Morse 2# Taper. MTA2-G0312-6Pcs(ISO) Set Tension and Compression Tap Holder Morse 2# Taper Shank. 1 xM12 Tap Collet -----for ISO Standard M12 Tap(Tap shank diam=9mm,Tap square size=7.1x7.1mm).
- CAT40-ER16 Floating Tap/Tapping Holder w 8pcs metric tap collets #CAT40-ER16-TM - The ER16 Tap Collets including: M1.6-M3.5, M4, M5, M6, M7, M8, M10, M12. CAT40-ER16 tap holder Draw Bar Thread: 5/8" -11. CAT40-ER16 tap holder gage length 4".
- CAT40-ER16 Floating Tap/Tapping Holder w 9pcs inch tap collets #CAT40-ER16-T - The ER16 Tap Collets including: #6(1/8"), #8(5/32"), #10(3/16"), #12(7/32"), 1/4", 5/16", 3/8", 7/16", 1/2". CAT40-ER16 tap holder Draw Bar Thread: 5/8" -11. CAT40-ER16 tap holder gage length 4".
- Tecnara Bt50 250-024-4 Tension & Compression Tapping Chuck Tool Holder Cnc Tool - Manufacturer: TECNARA. TOOL HOLDER. YOU ARE PURCHASING THE PICTURED. / LABELING PRODUCT SPECIFICATIONS AND / OR LABELING.
- Collis #5 Morse Taper Shank 1-7/8" Hand Tap Holder
- Value Collection #10 to 1" Tap Guide 3" Long, 1/2" Shank Diam
- Quill Mount Tapmatic 29099 Torque Bar
- Collis Tool 1/2" Pipe Tap, 1-1/2" Tap Entry Depth, MT4 Taper Shank Split Slee... - Collis Tool 1/2" Tap, 1-1/2" Tap Entry Depth, MT4 Taper Shank Split Sleeve Tapping Driver 3/8" Projection, 0.687" Tap Shank Diam, 0.515" Tap Shank Square
- Kato Bt50 - Sa412 - 3 Iii C Tapper Tool Holder M3 - M16 Capacity Tapping Head - YOU ARE PURCHASING THE PICTURED BT50 TAPPER. Manufacturer: KATO. ITEM TITLE. LOCATION: WB13-2-6-3.
- USED Scully Jones 01192 #2MT Split Sleeve Pipe Tap Driver 1/16" & 1/8" P.T. SS - PART# 01192.
- W.M ZIEGLER Floating Tapping Head Tool Holder Collet Mill Chuck 9/16 12 & 18 TAP - Made by W.M. Ziegler Co. This will not hold a pipe tap. Overall length of the collet is 1.200". Equipped with a 1/4" wide half moon drive key. The hole in the end of the nut is. 758". This one is Not a tension compression style holder.
- Kennametal Vdi 50 Tension Compression Live Tapping Tool Holder Cnc Lathe - VDI 50 SHANK. TENSION COMPRESSION TYPE. 22 TOOTH DRIVER.
- 14 Pcs. Techniks CAT 40 Bilz Style #2 Tension/Compression CNC Tapping Kit - Includes 1 Pc. of CAT 40 Bilz Style #2 T/C Tapping Holder & 13 Pcs. #2 Series ANSI Rigid Tap Collet Set 5/16" to 7/8" + 1/4", 3/8" & 1/2" NPT. Techniks Bilz Style #2 Series 5/16" to 7/8" + 1/4", 3/8" & 1/2" NPT Quick Change ANSI Rigid CNC Tapping Collet Set.
- 12 Pcs. Techniks CAT40 Bilz Style #1 Tension/Compression CNC Tapping Kit - Includes 1 Pc. of CAT 40 Bilz Style #1 T/C Tapping Holder & 11 Pcs. #1 Series ANSI Rigid Tap Collet Set #6 to 9/16" + 1/8" NPT. Techniks #6 to 9/16"+1/8" NPT Bilz Size # 1 ANSI Rigid CNC Tap Collets.
- 12 Pcs. Techniks CAT 40 Bilz Style #1 Rigid CNC Tapping Kit - Techniks #6 to 9/16"+1/8" NPT Bilz Size # 1 ANSI Rigid CNC Tap Collets. Includes 1 Pc. of CAT 40 #1 Rigid Tap Holder & 11 Pcs. #6 to 9/16" ANSI Rigid Tap Collet Set. Compatible with BILZ System. Techniks CAT 40 Bliz Style #1 Series Integral Shank Rigid CNC Tap Holder.
- MORSE TAPER #4 Tap Holder & Morse Taper #1 Tap Holder. Item. 1004 - Morse taper #1 & #4.
- TEGARA CAT 40 ER25 3.5" Floating Tap Tapping Holder CAT40 Made in TAIWAN P[ - TEGARA CAT 40 ER25 3.5" Floating Tap Tapping Holder CAT40. SHANK SIZE CAT40. TOOL HOLDER CATEGORY Floating Tap Holder. FLOATING TAP HOLDER COMPRESSION0.3125. FLOATING TAP HOLDER EXTENSION0.3125. ER collet & tap shown in the pictures are NOT included.
- Straight Shank 20mm C20-G0312-6Pcs (ISO) Set Tension &Compression Tap Holder - C20-G0312-6Pcs(ISO) Set Tension and Compression Tap Holder Straight Shank 20MM. Tapping Range: M3-M12(ISO Standard Tap). 1 x M3 Tap Collet ------for ISO Standard M3 Tap(Tap shank diam=3.15mm,Tap square size=2.5x2.5mm).
- BT40 GT12 110L tapping collet set Tool Holder workholding with 7pcs collets - BT40-GT12-110 tapping collet set BT40 Collet Chuck Tool Holder workholding. 5pcs BT40 APU16 120 CNC Milling Chuck Holder Milling Workholding BT40 APU16 120 152639554853. tap collet: M4 Φ 4 3.15. Holder :BT40-GT12-110.
- Tapmatic Tapping Head Back Jaw For Use with Tapping Attachments
- BT40-ER32 Floating Tap/Tapping Holder w 11 inch & NPT tap collets #BT40-ER32-T - The ER32 Tap Collets including: #6, #8, #10, #12, 1/4", 5/16", 3/8", 7/16", 1/2", 1/8" NPT, 1/4" NPT. BT40-ER32 tap holder Draw Bar Thread: 16mm.
- BT40-ER32 Floating Tap/Tapping Holder w. 7 metric tap collets #BT40-ER32-T - BT40 taper. Taper ground to exceed AT3 standard.
- CAT40-ER32 Floating Tap/Tapping Holder w 11 tap collets inch & NPT #CAT40-ER32-T - The ER32 Tap Collets including: #6, #8, #10, #12, 1/4", 5/16", 3/8", 7/16", 1/2", 1/8" NPT, 1/4" NPT. CAT40-ER32 tap holder Draw Bar Thread: 5/8" -11.
- CAT40-ER32 Floating Tap/Tapping Holder w. 7 metric tap collets #CAT40-ER32-T - CAT40 taper. Taper ground to exceed AT3 standard.
- SHARS CAT 50 ER40 Floating Tap Tapping Holder CAT50 New P[ - Use standard ER40 collet. Taper: CAT50. Rear thread for pull stud 1-8". You may ask for freight cost before buying tools. at Fixed Prices. Product application. Proj (L): 3.858". Made from alloy steel hardened to 54 - 56rc.
- CST Tapamatic RD15 Tapping Head on Cat 50 Taper Holder, INV. 38500
- COMMAND USA BT40 TAPPING HEAD 40 bt mill tapper tap chuck tool holder B4T4-0002 - Good used BT40 Tapping Head - Collet Type. Command USA - B4T4-0002.
- Erickson CAT45 Taper Milling Holder Tapping Floating Head Collet Locking Knob - Collet style - head is loose - possibly for tapping. CAT-45 Milling holder w/ retention knob.
- BT40-ER32 Floating Tap/Tapping Holder w. 4pcs ER32 tap collets #BT40-ER32-T - BT40-ER32 Floating Tap/Tapping Holder w. 4pcs ER32 tap collets. Tap Collets sizes: 1/4", 5/16", 7/16", 1/2.
- CAT40-ER32 Floating Tap/Tapping Holder w. 4pcs ER32 tap collets #CAT40-ER32-T - CAT40-ER32 Floating Tap/Tapping Holder w. 4pcs ER32 tap collets. Tap Collets sizes: 1/4", 5/16", 7/16", 1/2. Proj (L): 4.5".
- BT40-ER32 Floating Tap/Tapping Holder using ER32 or tap collets BT40-ER32-T - BT40 taper Draw Bar Thread: M16x2.
- 2 BT40-ER32 Floating Tap/Tapping Holders using ER32 or tap collets BT40-ER32-T - BT40 taper Draw Bar Thread: M16x2.
- 2 CAT40-ER32 Floating Tap/Tapping Holders using ER32 or tap collets CAT40-ER32-T - DESCRIPTION: The Best Quality on The Market----Sold A Lot of to Distributors to put on famous labels. Product description2 CAT40-ER32 Floating Tap/Tapping Holders using ER32 or tap collets CAT40-ER32-TCAT40 taperDraw Bar Thread: 5/8" -11Collet Series: ER-32 regular Collets or CME ER32 tap colletsProj (L): 4.5"Floating tap holder is a great choice for holding tap or reamer in light duty operation3/8 compression travel via adjustable internal springAll critical surfaces precision ground Taper grinds to exceed AT3 standardMade from alloy steel hardened to HRC52-56Exterior color may be black finished or polish finished and we ship whatever in stock.
- CAT40-ER32 Floating Tap/Tapping Holder using ER32 or tap collets #CAT40-ER32-T - CAT40 taper. 3/8 compression travel via adjustable internal spring.
- Procunier 3/4" Straight Shank Diam Tension Tapping Chuck #0 to 1/4" Tap Capacity
- Tapmatic 603161 Back Jaws for Tapmatic R-3 - Tapmatic 603161 Back Jaws for Tapmatic R-3 (Accessory for Tapping Head)
- SL20 TER16 80L C20 ER16 Floating Tapping Collet Chuck Holder 20mm tapping holder - ER straight shank extension floating tapping collet holder has longer shank (150L 200L 250L 300L 350L) suitable for deep hole machining.
- SL20 TER20 80L C20 ER20A Floating Tapping Collet Chuck Holder Straight Shank - ER straight shank floating tapping collet holder has longer shank (150L 200L 250L 300L 350L) suitable for deep hole machining. Floating tapping shank retractable ER tapping arbor extension rod on machine.
- SL16-TER20 80L C16 ER20A Floating Tapping Collet Chuck Holder Straight Shank - ER straight shank floating tapping collet holder has longer shank (150L 200L 250L 300L 350L) suitable for deep hole machining. Floating tapping shank retractable ER tapping arbor extension rod on machine.
- SL16-TER11-80L C16 ER11A Floating Tapping Collet Chuck Holder Straight Shank - ER straight shank floating tapping collet holder has longer shank (150L 200L 250L 300L 350L) suitable for deep hole machining. Floating tapping shank retractable ER tapping arbor extension rod on machine.
- SL20 TER16 80L C20 ER16A Floating Tapping Collet Chuck Holder Straight Shank - ER straight shank extension floating tapping collet holder has longer shank (150L 200L 250L 300L 350L) suitable for deep hole machining. It can reduce the use of lengthened tools, thereby reducing costs and increasing efficiency.
- Value Collection 1/4 to 1/2" Tap Guide 4-7/8" Long, 5/8" Shank Diam
- Value Collection #0 to #12" Tap Guide 6-1/2" Long, 3/8" Shank Diam, 1" Handle... - Value Collection #0 to #12" Tap Guide 6-1/2" Long, 3/8" Shank Diam, 1" Handle Diam
- MTB3-G0312 Morse 3# Taper With M12 Thread Tension &Compression Tap Holder for G3 - Spindle Taper type: Morse 3# (MTB3). Draw Bar Thread : M12. Spindle conicity Standard: Morse Taper. Tapping Range: M3-M12(JIS Tap), M3-M16(ISO Tap). Tapping range: M3-M12(JIS Tap), M3-M16(ISO Tap). Item Price contain :1Pc MTB3-G0312 Tap Holder.
- MTB4-G0312 Morse 4# Taper With M16 Thread Tension &Compression Tap Holder for G3 - Spindle Taper type: Morse 4# (MTB4). Draw Bar Thread : M16. Spindle conicity Standard: Morse Taper. Tapping Range: M3-M12(JIS Tap), M3-M16(ISO Tap). Tapping range: M3-M12(JIS Tap), M3-M16(ISO Tap). Item Price contain :1Pc MTB4-G0312 Tap Holder.
- MTA4-G0312 Morse 4# Taper Tension &Compression Tap Holder for G3 Tap Collet - Spindle Taper type: Morse 4# (MT4=MTA4). Spindle conicity Standard: Morse Taper. Tapping Range: M3-M12(JIS Tap), M3-M16(ISO Tap). Tapping range: M3-M12(JIS Tap), M3-M16(ISO Tap). Item Price contain :1Pc MTA4-G0312 Tap Holder.
- MTA3-G0312 Morse 3# Taper Tension &Compression Tap Holder for G3 Tap Collet - Spindle Taper type: Morse 3# (MT3=MTA3). Spindle conicity Standard: Morse Taper. Tapping Range: M3-M12(JIS Tap), M3-M16(ISO Tap). Tapping range: M3-M12(JIS Tap), M3-M16(ISO Tap). Item Price contain :1Pc MTA3-G0312 Tap Holder.
- MTA2-G0312 Morse 2# Taper Tension &Compression Tap Holder for G3 Tap Collet - Spindle Taper type: Morse 2# (MT2=MTA2). Spindle conicity Standard: Morse Taper. Tapping Range: M3-M12(JIS Tap), M3-M16(ISO Tap). Tapping range: M3-M12(JIS Tap), M3-M16(ISO Tap). Item Price contain :1Pc MTA2-G0312 Tap Holder.
- Collis Tool 5/8" Tap, 1-29/64" Tap Entry Depth, MT3 Taper Shank Split Sleeve ... - Collis Tool 5/8" Tap, 1-29/64" Tap Entry Depth, MT3 Taper Shank Split Sleeve Tapping Driver 1/4" Projection, 0.48" Tap Shank Diam, 0.36" Tap Shank Square
- Collis Tool 3/4" Tap, 1-51/64" Tap Entry Depth, MT3 Taper Shank Split Sleeve ... - Collis Tool 3/4" Tap, 1-51/64" Tap Entry Depth, MT3 Taper Shank Split Sleeve Tapping Driver 1/4" Projection, 0.59" Tap Shank Diam, 0.442" Tap Shank Square
- Erickson V09 Rm-Sk-10872 Tension Tap Holder Collet Gs Loc5159 - COLLET STYLE; ERICKSON TYPE GS. TENSION ONLY TAP HOLDER. IF YOU HAVE A ISSUE OR NEED TO. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE. US FIRST BEFORE YOU START A.
- Pair of SPV SA-1E Tapping Heads with CAT 50 Collet Holders (Inv.30227) - (Inv.30227).
- CAT 50 Collet Holder with SPV SA-1E Tapping Head (Inv.29661) - With SPV Tapping Head. SPV #SA-1E. CAT 50 Collet Holder (Inv.29661). (Inv.29663-. Not What You Were Looking For?. ).
- Sandvik M5? - M12 Rubber Flex Collet Tap Holder Tapping head C3-391.60A-01 060A - C3-391.60A-01 060A. Tap range max(TRMAX) M12. Adaptive interface workpiece direction(ADINTWS) Collet DIN6345 (Rubberflex) -size J42x. SANDVIK TAP CHUCK. Takes a Rubber Flex collet but no collets are with it.
- Tapmatic 2-3/8 - 4-1/2 Threaded Mount, Tapping Head Quill Mount Torque Bar - Tapmatic 2-3/8 - 4-1/2 Threaded Mount, Tapping Head Quill Mount Torque Bar For Use with 2-3/8 to 4-1/2 Quill Diameters, Stop Arms
- Accupro CAT40 Taper Shank Rigid Tapping Adapter - Accupro CAT40 Taper Shank Rigid Tapping Adapter 5/16 to 7/8" Tap Capacity, 3-21/32" Projection, Size 2 Adapter, Quick Change
- Collis Tool 3/4" Tap, 1-51/64" Tap Entry Depth, MT4 Taper Shank Split Sleeve ... - Collis Tool 3/4" Tap, 1-51/64" Tap Entry Depth, MT4 Taper Shank Split Sleeve Tapping Driver 3/8" Projection, 0.59" Tap Shank Diam, 0.442" Tap Shank Square
- Collis Tool 3/8" Tap, 1-3/64" Tap Entry Depth, MT1 Taper Shank Split Sleeve T... - Collis Tool 3/8" Tap, 1-3/64" Tap Entry Depth, MT1 Taper Shank Split Sleeve Tapping Driver 3/16" Projection, 0.275" Tap Shank Diam, 0.206" Tap Shank Square
- Collis Tool #10 Tap, 57/64" Tap Entry Depth, MT1 Taper Shank Split Sleeve Tap... - Collis Tool #10 Tap, 57/64" Tap Entry Depth, MT1 Taper Shank Split Sleeve Tapping Driver 3/16" Projection, 0.194" Tap Shank Diam, 0.152" Tap Shank Square
- Collis Tool 1/2" Tap, 1-3/32" Tap Entry Depth, MT2 Taper Shank Split Sleeve T... - Collis Tool 1/2" Tap, 1-3/32" Tap Entry Depth, MT2 Taper Shank Split Sleeve Tapping Driver 1/4" Projection, 0.367" Tap Shank Diam, 0.275" Tap Shank Square
- Collis Tool 7/8" Tap, 1-29/32" Tap Entry Depth, MT3 Taper Shank Split Sleeve ... - Collis Tool 7/8" Tap, 1-29/32" Tap Entry Depth, MT3 Taper Shank Split Sleeve Tapping Driver 1/4" Projection, 0.697" Tap Shank Diam, 0.523" Tap Shank Square
- Collis Tool 1-1/2" Tap, 2-13/32" Tap Entry Depth, MT5 Taper Shank Split Sleev... - Collis Tool 1-1/2" Tap, 2-13/32" Tap Entry Depth, MT5 Taper Shank Split Sleeve Tapping Driver 7/16" Projection, 1.233" Tap Shank Diam, 0.925" Tap Shank Square
- Tapmatic Tap Chuck Nut
- Accupro 1" Straight Shank QC Rigid Tapping Adapter, #0 to 9/16" Tap Capacity - Accupro 1" Straight Shank Diam Rigid Tapping Adapter #0 to 9/16" Tap Capacity, 1.45" Projection, Size 1 Adapter, Quick Change, Through Coolant
- Accupro 1" Straight Shank Diam Rigid Tapping Adapter 5/16 to 7/8" Tap Capacit... - Accupro 1" Straight Shank Diam Rigid Tapping Adapter 5/16 to 7/8" Tap Capacity, 2.51" Projection, Size 2 Adapter, Quick Change, Through Coolant
- Collis Tool 1" Tap, 1.63" Tap Entry Depth, MT3 Taper Shank Standard Tapping D... - Collis Tool 1" Tap, 1.63" Tap Entry Depth, MT3 Taper Shank Standard Tapping Driver 2-5/16" Projection, 0.8" Tap Shank Diam, 0.6" Tap Shank Square
- Collis Tool 1-1/2" Tap, 2.31" Tap Entry Depth, MT4 Taper Shank Standard Tappi... - Collis Tool 1-1/2" Tap, 2.31" Tap Entry Depth, MT4 Taper Shank Standard Tapping Driver 3" Projection, 1.233" Tap Shank Diam, 0.925" Tap Shank Square
- Collis Tool 1-1/4" Tap, 2.19" Tap Entry Depth, MT4 Taper Shank Standard Tappi... - Collis Tool 1-1/4" Tap, 2.19" Tap Entry Depth, MT4 Taper Shank Standard Tapping Driver 3" Projection, 1.021" Tap Shank Diam, 0.766" Tap Shank Square
- Collis Tool 5/8" Tap, 1.44" Tap Entry Depth, MT3 Taper Shank Standard Tapping... - Collis Tool 5/8" Tap, 1.44" Tap Entry Depth, MT3 Taper Shank Standard Tapping Driver 2-5/16" Projection, 0.48" Tap Shank Diam, 0.36" Tap Shank Square
- BT40 tapping head,tapping collet chuck #TH-BT40 - DESCRIPTION: The Best Quality on The Market----Sold A Lot of to Distributors to put on famous labels.BT40 tapping head,collet chuck compatible with buyer torque control T-type adapter or positive drive adapters.Tension and compression style.Quick change collet chuck adapadapters;Push adapter releasing;Push taps releasing.We also stock adapters: 1/8"(#5), 5/32"(#8), 3/16"(#10), 1/4", 5/16", 3/8", 7/16", 1/2".A torque adjusting wrench included for torque control adapters.
- Huot 1/4-20 to 1/2-20 Tap Storage 3-1/4" Wide x 4-1/2" Deep x 1" High, Steel
- Rare WOHLNIP #4 Mill Tool Holder MASTER Collet Tap Chuck 1/2 - 3/4" Capacity - Manufacturer is Wohlnip Products - East Orange, NJ. Here we have aNice master collet holder.
- New WOHLNIP R-3 Mill Tool Holder MASTER Collet Tap Chuck 3/8 - 1/2" Capacity - Manufacturer is Wohlnip Products - East Orange, NJ. Here we have aNice New master collet holder.
- Tecnara 150-005-5 Cat 50 Tool Holder Cat50 Tapping Made In Japan
- NOS Narex CZECH Non-Tension Milling Machine TAP HOLDER BT50 Bilz #1 #337-042 - This sale is for ONE NOS Narex made TAP HOLDER BT50 BLIZ #1 3-3/4", No. 337-042. This high quality CZECHOSLOVAKIAN made HOLDER/ARBOR is bei ng offered at an exceptional price.
- NOS Narex Non Tension Milling Machine TAP HOLDER BT50 Bilz #2 #337-046 - This sale is for ONE NOS Narex made TAP HOLDER/ARBOR BT50 BLITZ #2 4-1/2", No. 337-046. This high quality CZECHOSLOVAKIAN made HOLDER/ARBOR is bei ng offered at an exceptional price.
- SMITH TOOL TMS-LCTH 322-1-217-FT 119963 Compression Tap Driver TMS3617 New - You are buying one compression tap driver. We will do our best to describe each item to the best of our ability.
- NPT WM ZIEGLER Universal Tapping Head Tool Holder Collet Mill Chuck 1/8 Pipe TAP - There is a Letter U on it and the numbers 15727. Here we have aNice used collet possibly for aFloating Tapping head. The collet is for holding a 1/8" NPT pipe thread tap that has a shank size of about. 315".
- Tegara CAT 40 ER16 Floating Tap Tapping Holder CAT40 P[ - New CAT 40 ER16 Floating Tap Holder. Taper: CAT40. Use standard ER16 collet. CAT40 Pull Stud for various machine builders (Haas, Fadal, Mazak, Hurco, Mori Seiki,Okuma, etc). We also have ER16 wrench for collet chucks available.
- TEGARA CAT 40 ER32 Floating Tap Tapping Holder CAT40 Made in TAIWAN P[ - TEGARA TOOLS CAT40 ER32 Floating Tap Collet Chuck NEW! Made in TAIWAN. Taper: CAT40. Use standard ER32 collet. Also available is a CAT40 CNC Tool Tightening Fixture. Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc.
- Tecnara 710 F109 4 Compression Tap Tool Holder Slitting Saw Tension Tapping Head
- Tap holder No. M-303 NEW USA 8/1-48 - Tap holder No. M-303 NEW USA 8/1-48. 7/8" counter bore with spring.
- VDI 50 Okuma Live Tooling Holder Tapping Tap - This holder does not have part no. so we do not know the manufacturer, could very well be Okuma themselves. This is a floating tapping head. Other then minor scratches and marks this is in great condition.
- SHARS CAT 40 ER20 Floating Tap Tapping Holder CAT40 #[ - SHARS TOOLS CAT40 ER20 Floating Tap Collet Chuck NEW! Taper: CAT40. Also available is a CAT40 CNC Tool Tightening Fixture. SHARS 6" 670V Milling Vise +/-0.0004. SHARS 6" 660U Milling Vise +/-0.0004. SHARS 6" 600DS Double Station Milling Vise +/-0.0002.