110V 5A Electro Magnetic Chuck Controller Magnetic LED Display PlanerAccessorie - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Fine Pole Permanent Round Magnetic Chuck Diameter 7.87 inch for Grinding Machine - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a work piece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
Fine Pole Permanent Round Magnetic Chuck Diameter 6.3 inch for Grinding Machine - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a work piece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
Magnetic Chuck Fit: Grinding Machine Permanent Magnetic Chuck ≥100N/CM² New - Traditional permanent magnetic chuck has low accuracy, insufficient magnetic force, and difficulty in removing the workpiece. Look at our permanent magnetic chuck. It is made of high-quality material with strong hardness and good corrosion resistance.
Magnetic V-Block Chuck 1-7/8″ × 2-5/8″ × 2″ Precision Ground 1 Pair - MAGNETIC V-BLOCK. •Precision Ground on All Surfaces •Serial Numbered in Pairs •Integrally Aluminum Cast into One Solid Piece •Holds in Any Direction •For best results use with electromagnetic chucks. Product Features.
Kanetsu KMT-1545A-AM Permanent Magnet Chuck 45 x 25 cm Adjustable Force Mag~18" - Manufacturer:Kanetsu Kogyo. (1) Kanetsu KMT-1545A-AM Chuck. Manufacturer: Kanetsu Kogyo Co., Ltd. Notes:This chuck is in Good working condition. The handle turns easily and the magnetic force varies from full-on to very-very-slightly on, never quite 0% but it's low enough to reposition work on the chuck without difficulty.
4 PCS Portable Brass Air Chuck Set Heavy Duty Dual Head Tire NEW - Open flow air chuck,compatible with tire inflator gauges,suitable for trucks, buses, cars, motorcycles, bicycles,the locking clip can secure to seal the air chuck into place to a valve stem.
100*175mm/ 4''×7" Surface Grinder Permanent Magnetic Chuck For Grinding Machine - Model: 100 175mm (4"x7"). 1 X Permanent Magnetic Chuck 100mm 175mm. Applicable to grinding machines, EDM EDM, line cutting, tapping machines, bench drill and other processing. Magnetic pole gap fine, uniform magnetic force, small workpiece processing, the effect is particularly evident.
Lathe Electro Magnetic Chucks Controller Planer Milling Grinding 220/110V 5A/10A - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
110V 5A Electro Magnetic Chuck Controller Magnetic LED Display PlanerAccessories - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Robbins XLO Magna-Sine Permanent Magnetic Chuck Model B5 6.5"x 6.5"x 4" - This is a Robbins XLO Magna-Sine Permanent Magnetic Chuck Model B5 with a dimension of 6.5"x 6.5"x 4". It is suitable for use in the CNC, Metalworking & Manufacturing, and Workholding & Toolholding industries. This item is pre-owned and does show signs of wear.. see all photos for the condition..
Permanent Round Magnetic Chuck-Fine Pole Strong Magnet Sucker-Diameter 200mm NEW - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a work piece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker. Parameters: Suction : >100 N / cm2 Diameter : about 200mm (7.87 inch ) Height :about 49mm (1.
Permanent Round Magnetic Chuck-Fine Pole Strong Magnet Sucker-Diameter 160mm NEW - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a work piece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker Parameters: Suction : >100 N / cm2 Diameter : about about 160mm (6.29 inch ) Height :about 49mm (1.
1×Electro Magnetic Chuck Controller LED Display Planer F Milling Grind 110V 5A - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
magnetic chuck 6 x 18 - Gromax KRTW1545A - GROMAX KRTW1545A, 6" x 18" Low-Profile EDM Chuck. Permanent Magnetic Chuck Oil Proof For Surface Grinder & EDM. Thin & light weight work piece are ideally suitable because of fine-pitched magnetic poles.
18" x 6" Walker Air Chuck - Walker Air Chuck - Walker Air Chuck. The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always receiving new inventory.
CNC super powerful permanent magnet chuck Machining magnetic table 150*150mm - The disk adopts high-performance N45 neodymium iron boron, strong magnetic force and never demagnetization, no energy consumption, and increase the clamping efficiency by more than 80%. 18 18 large squares, each square can reach about 40KG magnetic force.
110V 5A Milling Grinding Electro Magnetic Chuck Controller LED Display Planer - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
110V 5A Electro Magnetic Chuck Milling Grinding LED Display Controller Planer - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
4" x 7" Permanent Magnetic Chuck - 4" x 7" magnetic chuck - Excellent Condition. The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always receiving new inventory.
Suburban Tool 18 X 6 Magnetic Chuck - Suburban Tool 18 X 6 Magnetic Chuck - Excellent Condition. The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always receiving new inventory.
250mm Grinding Machine Round Magnetic Chuck Permanent Magnetic Chuck - Magnetic Chuck 250mm. Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a work piece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
160mm Round Magnetic Chuck Grinding Machine Permanent Magnetic Chuck - Magnetic Chuck 160mm. Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
6×6" Magnetic Chuck Permanent for Grinding Machine Permanent Grinding Chuck - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
Brown & Sharpe 10'' Magnetic Chuck - Brown & Sharpe 10" Magnetic Chuck - Excellent Condition. The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always receiving new inventory.
Brown & Sharpe 9" Diameter Permanent Magnetic Chuck - The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always receiving new inventory.
Lathe Electro Magnetic Chucks 5A/10A Controller Planer Milling Grinding 220/110V - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Magnetic Chuck Controller 110V 5A Milling Grinding Electro LED Display Planer - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
5A/10A Lathe Electro Magnetic Chucks Controller Planer Milling Grinding 220/110V - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
CNC super powerful permanent magnet chuck Machining magnetic table 150*150mm - The disk adopts high-performance N45 neodymium iron boron, strong magnetic force and never demagnetization, no energy consumption, and increase the clamping efficiency by more than 80%. 18 18 large squares, each square can reach about 40KG magnetic force.
Walker Magnetics 612 Ceramax 6x12 Magnetic Chuck NEW - This will avoid us opening an unpaid item case. 7:00PM EST. PROBLEMS WITH YOUR ITEM. We are more than happy to help you try to resolve any issues you have.
110V 5A Electro Magnetic Chuck Milling Grinding LED Display Controller Planer - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Magnetic Chuck 14x6 - This is a used magnetic surface chuck in good condition please look at pictures I don’t see a name on it Please check out my other listing thank you
CNC super powerful permanent magnet chuck Machining magnetic table 150*150mm - The disk adopts high-performance N45 neodymium iron boron, strong magnetic force and never demagnetization, no energy consumption, and increase the clamping efficiency by more than 80%. 18 18 large squares, each square can reach about 40KG magnetic force.
110V 5A Electro Magnetic Chuck Milling Grinding LED Display Controller Planer - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Eclipse Magnetic Lathe Chuck J37 4-3/4” Diameter - Eclipse Magnetic Lathe Chuck J37 4-3/4” Diameter. Eclipse magnetic lathe chuck is used but in great condition. Some light scratches and scuffs do occur on the surface. Item shipped through USPS. Please contact me if any flaws or mistakes arise; I will be happy to help. Also, please view photos for the best description of condition and specs. Overall the item is in great condition. Free shipping only to the lower 48 states. Feel free to contact me with any questions concerning an item. Refunds and returns do occur and will be treated fairly as possible.
100*175 Disc Grinder 0-45 Degree Swash Plate Sine Magnetic Table Grinder - 100 175,0-45 Degree High Precision Surface Grinder, Portable Disc Grinder, Swash Plate Sine Magnetic Table Grinder. Angle processing range: sine: 0-45°. Bowed sine disk. Strong magnetic force-suction force up to 150N/CM2.
Walker 5"x10" Rectangular Permanent Magnetic Block Chuck 3-1/8" Height - Pallet Racking. In Good Used Condition. See photos. LET'S STAY IN TOUCH. Information and Support. It is neither inferred or implied that any item sold by Arrow Industrial is a product authorized or in any way connected with any manufacturers displayed on our pages.
Taft-Peirce 6"x18" Rectangular Permanent Magnetic Block Chuck 2.5" Height - Pallet Racking. In Good Used Condition. See photos. -Original handle tip is twisted off, extra allen wrench is included. LET'S STAY IN TOUCH. Information and Support. It is neither inferred or implied that any item sold by Arrow Industrial is a product authorized or in any way connected with any manufacturers displayed on our pages.
PreAsion® Steel Magnetic Lifter Lifting Magnet 1320LBS Permanent Lift Magnets US - 1320LBS / 600KG Permanent Lift Magnets. 1×Steel Magnetic Lifter Lifting Magnet 1320LBS / 600KG Permanent Lift Magnets. Steel Magnetic Lifter Lifting Magnet. The magnetic lifter is made with superstrong neodymium magnets, which is used for lifting steel sheet,block, rod, cylindrical and other magneticmaterial.
CNC super powerful permanent magnet chuck Machining magnetic table 150*150mm - The disk adopts high-performance N45 neodymium iron boron, strong magnetic force and never demagnetization, no energy consumption, and increase the clamping efficiency by more than 80%. 18 18 large squares, each square can reach about 40KG magnetic force.
110V 5A Electro Magnetic Chuck Controller Magnetic LED Display PlanerAccessorie - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Portable Disc Grinder,100*175,0-45 Degree High Precision Swash Plate Sine Magnet - 100 175,0-45 Degree High Precision Surface Grinder, Portable Disc Grinder, Swash Plate Sine Magnetic Table Grinder. Angle processing range: sine: 0-45°. Bowed sine disk. One Sine Disk. It has the characteristics of high precision, uniform suction, and safe use.
110V 5A Electro Magnetic Chuck Controller Magnetic LED Display PlanerAccessories - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
110V 5A Electro Magnetic Chuck Controller Magnetic LED Display PlanerAccessorie - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Dia 9.8in Fine Pole Permanent Magnetic Chuck, (250mm) Circular Magnetic Chuck - No electricity is needed which avoid the workpiece falling off due to sudden power failure. High-performance magnetic steel disk, with suction, almost no remanence. Suction can be 120N / cm3. Fine pole permanent magnetic chuck can be used for surface grinder, tool grinder, other applications.
110V 5A Electro Magnetic Chuck Milling Grinding LED Display Controller Planer - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Powerful Permanent Magnetic Chuck Workhold For Grinding Machine Bench Drills - Suitable for grinding machines, EDM electric sparks, wire cutting, tapping machines, bench drills and other processing. Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing.
LED Display Milling Grinding Electro Magnetic Chuck Controller Planer 5A - Specifications: Input Voltage: 110V/60Hz(220V/50Hz optional Please note) Output Voltage: 0-100V DC Current Capacity: 5 Amp Demagnetizing Time: 9-15 seconds Product size: 130×140×200mm / 5.1×5.5×7.8 inch Package size: 24×21×20cm / 9.4×8.2×7.8 inch Net weight: 3kg Gross weight: 3.25kg.
150*150mm CNC Super Powerful Permanent Magnet Chuck Machining Magnetic Table - The disk adopts high-performance N45 neodymium iron boron, strong magnetic force and never demagnetization, no energy consumption, and increase the clamping efficiency by more than 80%. 18 18 large squares, each square can reach about 40KG magnetic force.
CNC super powerful permanent magnet chuck Machining magnetic table 150*150mm - The disk adopts high-performance N45 neodymium iron boron, strong magnetic force and never demagnetization, no energy consumption, and increase the clamping efficiency by more than 80%. 18 18 large squares, each square can reach about 40KG magnetic force.
ECLIPSE Permanent Magnetic Cylindrical Grinder Tool Post Grinder Lathe Chuck - ECLIPSE 4-3/4” Permanent Magnetic Cylindrical Grinder / Lathe tool post grinding Chuck. Would be a good chuck for use on an Indexer as well.The tool holder is NOT included, just being used to show it works.Actual item pictured. Be sure to view our other items for more great tooling finds.
110V 5A Electro Magnetic Chuck Controller Magnetic LED Display PlanerAccessorie - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Powerful New Permanent Magnetic Chuck Workhold For Grinding Machine Bench Drills - Suitable for grinding machines, EDM electric sparks, wire cutting, tapping machines, bench drills and other processing. Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing.
Magnetic Chuck 6.3in Round Chuck Fine Pole Magnetic Chuck Powerful Sealed Chuck - 6.3in Round Chuck Fine Pole Magnetic Chuck. Magnetic Chuck. Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. Powerful Sealed Chuck for Grinding Machine.
220/110V 5A/10A Lathe Electro Magnetic Chucks Controller Planer Milling Grinding - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
150*350mmUltrapowerful Grinder Sucker Disk Flat Plate Dense Brass Magnetic Table - The surface of the workpiece to be sucked should be flat. If there are pits or grooves on the surface of the workpiece to be sucked, it will affect the sucker's holding of the workpiece. The work surface of the suction cup should be kept clean.
Fine Pole Permanent Magnetic Chuck for Grinding Milling Machine Lathe 6"×16" in - Fine Pole Permanent Magnetic Chuck for Grinding Milling Machine Lathe 6"×16" in. Item is In great shape other than one spot looks like it was dropped in shipping but still looks to be wirk just fine just a little dented. See pictures for details
110V 5A Electro Magnetic Chuck Controller Magnetic LED Display PlanerAccessorie - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
110V 5A Electro Magnetic Chuck Controller Magnetic LED Display PlanerAccessorie - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
OZAR Magnetic Chuck Long V-Block Precision Ground 1 Piece - MAGNETIC CHUCK LONG V-BLOCK. •Precision Ground on All Surfaces •Serial Numbered in Pairs •Integrally Aluminum Cast into One Solid Piece •Holds in Any Direction •For best results use with electromagnetic chucks •V-Blocks Available with 1/2″ and 2″ Capacity.
Surface Grinder Magnetic Chuck XM91 Grinding Disk Applicable Grinding Machines - Applicable to grinding machines, EDM EDM, line cutting, tapping machines, bench drill and. Magnetic pole gap fine, uniform magnetic force, small workpiece processing, the effect is. Tungsten steel, hard alloy steel and other magnetic small workpieces are not suitable for.
Bohli 100mm Magnetic Chuck For the Schaublin 70 - W12 - This Bohli 100mm magnetic chuck for the Schaublin 70 lathe with W12. It has a super strong magnet with on/off switching. Very solid and extremely well built chuck.
1×Electro Magnetic Chuck Controller LED Display Planer F Milling Grind 110V 5A - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Permanent Magnetic Chuck For Grinding Milling Machine 70*150 MM Premium Powerful - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker.
Steel Magnetic Lifter Lifting Magnet with Release Heavy Duty Permanent Lift Magn - 【Galvanized lifting ring】The ring of the permanent lift magnet is made of alloy steel and galvanized with high strength. The outer layer of the machine is baking paint design, which is waterproof. 【Strong suction】This steel magnetic lifter has a strong load capacity: the Max.
5A/10A Lathe Electro Magnetic Chucks Controller Planer Milling Grinding 110/220V - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
100*175 Disc Grinder 0-45 Degree Swash Plate Sine Magnetic Table Grinder - 100 175,0-45 Degree High Precision Surface Grinder, Portable Disc Grinder, Swash Plate Sine Magnetic Table Grinder. Angle processing range: sine: 0-45°. Bowed sine disk. Strong magnetic force-suction force up to 150N/CM2.
100*175 Disc Grinder 0-45 Degree Swash Plate Sine Magnetic Table Grinder - 100 175,0-45 Degree High Precision Surface Grinder, Portable Disc Grinder, Swash Plate Sine Magnetic Table Grinder. Angle processing range: sine: 0-45°. Bowed sine disk. Strong magnetic force-suction force up to 150N/CM2.
High-precision Strong Magnetic Surface Grinder 100*175 Sinusoidal Magnetic Table - High-precision Strong Magnetic Surface Grinder 100 175 Sinusoidal Magnetic Table Brass Chuck Angle 0-45 Degrees Disc LK. Commodity Type: Brass. Uses: It is mainly used for workpiece processing and positioning on various surface grinders and tool grinders.
Lathe Electro Magnetic Chucks Controller Planer Milling Grinding 220/110V 5A/10A - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
High-precision Strong Magnetic Surface Grinder 100*175 Sinusoidal Magnetic Table - High-precision Strong Magnetic Surface Grinder 100 175 Sinusoidal Magnetic Table Brass Chuck Angle 0-45 Degrees Disc LK. Commodity Type: Brass. Uses: It is mainly used for workpiece processing and positioning on various surface grinders and tool grinders.
5A/10A Lathe Electro Magnetic Chucks Controller Planer Milling Grinding 110/220V - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
220/110V 5A/10A Lathe Electro Magnetic Chucks Controller Planer Milling Grinding - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Kinjung Magnetic Chuck Kmt-1545B 18" X 6" Kmt1545B - Used - KINJUNG MAGNETIC CHUCK. NEW, old inventory. USED, but in good working condition. USED, SOLD AS IS. If your item is received in a different condition than stated (DOA, not working properly etc. • Freight, etc. ).
Circular Permanent Magnetic Chuck 250mm 9.84inch Diameter Fine Pole Round Chuck - Circular Permanent Magnetic Chuck. Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a work piece positioning processing. Strong dense pole permanent magnet sucker is for surface grinder, sparks machine, WEDM.
220/110V 5A/10A Lathe Electro Magnetic Chucks Controller Planer Milling Grinding - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Hougen 12340 40MM X 25MM "12,000-Series" Annular Cutter - Use Hougen "12,000-Series" Cutters with stationary tools, drill presses and magnetic drills. 1" (25mm) depth of cut. Cuts holes faster, more accurate and cleaner than competitive tools. Unique Hougen features provide the best performance in the widest range of materials.
Square Powerful CNC Magnetic Chuck 12*12 in/300*300MM CNC Milling Machine - CNC Magnetic Chuck 12 12 in Workholding Permanent Super Power Square. This Super powerful 12" x 12" Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing.
110V 5A Electro Magnetic Chuck Controller LED Display Planer F Milling Grinding - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Brown & Sharpe #510 10" x 5" Magnetic Chuck Magnet Manual Surface Grinder - Brown & Sharpe magnetic chuck. Specifications: Model: 510 Table Size: 10-3/8" x 5-1/2" Condition: Good working Please contact us directly if you need overnight shipping! M.I.S. Industrial contact info: info (at) misindustrial.com Office: [phone removed by eBay] Also please check out our website for FREE shipping!.
Round Permanent Magnetic Chuck Diameter 250mm/9.84 in CNC Workholding - Magnetic Chuck 250mm. Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a work piece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
6.5" Round Permanent Magnetic Chuck 165mm Strong Workhold Powered Best Quality - The capacity of lathe is increased by fitting a permanent magnetic chuck. The solid construction is based on the solid assembly of components. TORRENS HIGH POWER MAGNETIC TOOLS. Assembled with powerful magnets.Fine, solid mild steel made.Easy operated On-Off lever.Heavy Duty and Permanent.Ease of installation and operation.
Magnetic Lifter, 600KG teel Magnetic Lifter, Permanent Metal Lifting Magnet - • Maximum weight capacity: 600kg(1320 lb). This magnetic lifter is made with neodymium magnets which are used for lifting steel sheets, blocks, rods, cylinders and other magnetic materials. The V slot on the bottom is ideal for flat or round loading surfaces.
Milling Grinding Electro Magnetic Chuck Controller 110V 5A LED Display Planer - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
1×Electro Magnetic Chuck Controller LED Display Planer F Milling Grind 110V 5A - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
110V 5A Electro Magnetic Chuck Milling Grinding LED Display Controller Planer - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
5A Electro Magnetic Chuck Controller LED Display Planer F Milling Grinding 110V - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Lisle 12060 Master Chuck Key Large, Magnetic - Flexzilla SFZG62 2,400 sq.ft. Oscillating Lawn Sprinkler. Safety & Personal Protection. If you have any difficulties with the manufacturer of the product, we will be happy to step in and assist on your behalf.
10x20in Permanent Magnetic Chuck 100-120N/cm² Magnetic Force Rectangular Chuck - The magnetic chuckcan be used for processing various magnetic conduction work pieces. It requires no electricity. We used advanced N45 Magnet Materialwith safety factor of 3.5 to provide superstrong magnetism for you, and its max pulling power equals to 450kg/ 992lbs, while most of our competitors use N40/N42 magnet material whose safety factor is between 2 to 2.5.
110V 5A Electro Magnetic Chuck Controller Magnetic LED Display PlanerAccessories - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
12" x 6" Rectangular Magnetic Chuck Permanent Magnet Table Close Poles - All like poles are connected to ensure the most effective hold on single work pieces or on partial plates. Close Poles. advice and should never dismantle the chuck. Heavy Duty and Permanent. Pole spacing is carefully selected to cover the widest range of work pieces on the upper plate.
12" x 6" Rectangular Magnetic Chuck Permanent Magnet Table Close Poles - All like poles are connected to ensure the most effective hold on single work pieces or on partial plates. Close Poles. advice and should never dismantle the chuck. Heavy Duty and Permanent. Pole spacing is carefully selected to cover the widest range of work pieces on the upper plate.
Milling Grinding Electro Magnetic Chuck Controller 110V 5A LED Display Planer - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
110V 5A Electro Magnetic Chuck Controller LED Display Planer F Milling Grinding - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
5A Electro Magnetic Chuck Controller LED Display Planer F Milling Grinding - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
New Powerful Permanent Magnetic Chuck Workhold For Grinding Machine Bench Drills - Suitable for grinding machines, EDM electric sparks, wire cutting, tapping machines, bench drills and other processing. Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing.
Electro Magnetic Chuck Controller 110V 5A LED Display Planer Milling Grinding - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Sine Permanent Magnetic Chuck Single Tilting Permanent Magnetic Chuck - Sine permanent magnet chuck is suitable for various plane of grinder, single angle precision grinding EDM machines. Selecting high quality materials, strong suction, small remanence, magnetic uniform distribution.
Milling Grinding Electro Magnetic Chuck Controller 110V 5A LED Display Planer - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
WALKER CERAMAX MAGNETIC SURFACE GRINDER MILL EDM CHUCK 6" x 10” Free Ship - WALKER CERAMAX MAGNETIC SURFACE GRINDER MILL EDM CHUCK 6" x 10” Free Ship. Tested and in working order. Theres few tiny holes in the top and a few minor imperfections but nothing that would affect its use. Shows wear as seen in the photos. Free shipping to the lower 48 states only.C2 #2
WALKER CERAMAX MAGNETIC SURFACE GRINDER MILL EDM CHUCK 6" x 6” Free Ship - WALKER CERAMAX MAGNETIC SURFACE GRINDER MILL EDM CHUCK 6" x 6” Free Ship. Tested and in working order. Theres a tiny hole in the center and a few minor imperfections but nothing that would affect its use. Shows wear as seen in the photos. Free shipping to the lower 48 states only.C2 #1
110V 5A Electro Magnetic Chuck Controller Magnetic LED Display PlanerAccessories - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
110V 5A Electro Magnetic Chuck Controller LED Display Planer F Milling Grinding - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Dia 9.8"Fine Pole Permanent Magnetic Chuck, Round Circular Magnetic Force Chuck - No electricity is needed which avoid the workpiece falling off due to sudden power failure. High-performance magnetic steel disk, with suction, almost no remanence. Suction can be 120N / cm3. Fine pole permanent magnetic chuck can be used for surface grinder, tool grinder, other applications.
Powerful Permanent Magnetic Chuck 200*450mm (8"x18") HMT-2045A - TAICHONG Powerful Permanent Magnetic Chuck 200 450mm (8"x18" ). Water-resistance property enables whole chuck to be used in liquid. Average magnetic force beyond 10kg/cm². Pole Pitch: 11.2(1.6+2+1.6+6)mm.
6" Round Permanent Magnetic Chuck 150mm Strong Workhold Powered Magnetic Bed - The capacity of lathe is increased by fitting a permanent magnetic chuck. The solid construction is based on the solid assembly of components. TORRENS HIGH POWER MAGNETIC TOOLS. Assembled with powerful magnets.Fine, solid mild steel made.Easy operated On-Off lever.Heavy Duty and Permanent.Ease of installation and operation.
110V 5A Electro Magnetic Chuck Controller Magnetic LED Display PlanerAccessories - Three-position switch, the upper left is the magnetic position, the middle is the empty position, and the right side is the demagnetization position. Current capacity: 5 Amp. EASY OPERATION - Small size, easy to use, fast magnetic retraction, clean demagnetization, infinite polarity.
Permanent Magnetic Chuck For Grinding Milling Machine 70*150 MM Premium Powerful - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker.
12" x 6" Rectangular Magnetic Chuck Permanent Magnet Table Close Poles - Is carefully selected to cover the widest range of workpieces on the upperplate. All like poles. Close Poles Placing. advice and should never dismantle the chuck. Heavy Duty and Permanent. are connected to ensure the most effective hold on single work pieces or on partial plates.
SHARS 4x7" Strong Magnetic Pull Fine Pole Permanent Magnetic Chuck NEW R] - MAGNETIC CHUCK CATEGORY Permanent Magnetic Chuck. MAGNETIC POLE STYLEFine Pole. Pole micro pitch: 2.0 (0.5+1.5): 0.5 mm copper width + 1.5mm steel width. STEEL POLE SPACING1/16. POLE DEPTH0.78. MAGNETIC PULL (LBS)174.
Powerful Permanent Magnetic Chuck 250*500mm (10"x20") HMT-2550A - TAICHONG Powerful Permanent Magnetic Chuck 250 500mm (10"x20" ). Water-resistance property enables whole chuck to be used in liquid. Average magnetic force beyond 10kg/cm². Pole Pitch: 11.2(1.6+2+1.6+6)mm.
Walker 6" x 6" Magnetic Chuck Magnet Manual Surface Grinder BXM-2348C - Walker permanent magnetic chuck. Specifications: Model: BXM-2348C Table Size: Approx. 6" x 6" Condition: Good working Please contact us directly if you need overnight shipping! We can also ship this internationally with DHL Express: Please contact for Quote Mullett Industrial Sales contact info: mark at mullettindustrialsales.com Office: [phone removed by eBay] Also please check out our website for FREE shipping!.
Surface Grinder Magnetic Chuck XM91 Grinding Disk Applicable Grinding Machines - Applicable to grinding machines, EDM EDM, line cutting, tapping machines, bench drill and. Magnetic pole gap fine, uniform magnetic force, small workpiece processing, the effect is. Tungsten steel, hard alloy steel and other magnetic small workpieces are not suitable for.
Permanent Magnetic Chuck Brand New 4x 8" - Permanent Magnetic Chuck Close Poles 150 mm x. Heavy Duty and Permanent. Fine, solid mild steel made. Greater strength and rigidity. Ease of installation and operation.
Permanent Magnetic Chuck, 6inx6in,Fine Pole Magnetic Chuck, Powerful 120 N/cm² - Permanent Magnetic Chuck, 6inx6in,Fine Pole Magnetic Chuck, Powerful Sealed Chuck w/ 120 N/cm² Magnetic Force. Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing.
8” Round Magnetic Chuck--fine pole-#H9603D-new - PERMANENT MAGNETIC ROUND CHUCKCLOSE POLEHIGH POWERTHE TOP PLATE IS FURNACE BRAZED. MAKE A SOLID ONE PIECE UNIT.Sealed against dirt & liquid. For surface grinding,lathe,auxiliary tooling. Not electric controls needed. With removeable handle.IT CAN BE DRILLED OR MACHINED TO A DEPTH EQUAL TO THICKNESS OF THE TOP PLATE MINUS 1/8".SIZE: 8”/200mm dia.3 rear side mounting holes distributed circle diameter: 180mmRear side recess diameter: 165mmWT: 40 LBSFroo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
SHARS 200x150x86mm Combination Steel Sine Plate & Magnetic Chuck Combo R] - ANGLE PLATE SINE PLATE MAG. CHUCK CATEGORY Combination Sine Plate/Magnetic Chuck. MAGNETIC POLE STYLE Fine Pole. MAGNETIC PULL (LBS)175. Top plate is laminated from steel & stainless steel, then brazed into one solid piece and precision ground.
Magnetic Chuck 6 x 4 Surface Grinder Milling Machine - Magnetic Chuck 6 x 4 Surface Grinder Milling Machine. I bought this from a high end machine shop auction. There is no name on it but I would be willing to bet it’s a good brand. I don’t know much about these. I don’t know how much they hold. I did some test and seems to work well. You can see I was able to pick it up by the material it was holding
12" x 6" Rectangular Magnetic Chuck Permanent Magnet Table Close Poles()# - Is carefully selected to cover the widest range of workpieces on the upperplate. All like poles. Close Poles Placing. Heavy Duty and Permanent. are connected to ensure the most effective hold on single work pieces or on partial plates.
Diameter 160mm Round Fine-Pole Permanent Magnetic Chuck HRW-16 - Pole Pitch: 2(1+1)mm. The magnetic force can be adjusted easily. Suitable for grinding thin and small workpieces. Orders under 150 lbs. Orders above 150 lbs. Weight: 15 kg (33.5 lbs.). 100% Made in Taiwan.
Surface grinder permanent magnetic chuck XM91 100*175mmto grinding machines - Applicable to grinding machines, EDM EDM, line cutting, tapping machines, bench drill and. applicable to grinding machines and other processing 1pc. Magnetic pole gap fine, uniform magnetic force, small workpiece processing, the effect is.
Learn To Handscrape & Biax Power Scrape Usb Stick For Machinery Ways - What blades to choose and how to sharpen the blades. Pictures are of classes where I am teaching scraping. The USB teaches you to scrape a small surface plate and after you learn to scrape a flat surface you can hand and power scrape projects like the pictures show my students are doing.
11.8" / 300mm Round Permanent Magnetic Chuck Table Strong Hold Surface Grinder - 300mm Round Permanent Magnetic Chuck. PRAZTECH circular chucks, apart from grinding have ample reserves of power for withstanding fast finishing cuts, when turning. The capacity of lathe is increased by fitting a permanent magnetic chuck.
125*250mmUltrapowerful Grinder Sucker Cnc Permanent Magnetic Engraving Machine - The surface of the workpiece to be sucked should be flat. If there are pits or grooves on the surface of the workpiece to be sucked, it will affect the sucker's holding of the workpiece. The size of the workpiece being held will affect the holding force of the workpiece.
100*175mmUltrapowerful Grinder Sucker Cnc Permanent Magnetic Brass Engraving Mac - The surface of the workpiece to be sucked should be flat. If there are pits or grooves on the surface of the workpiece to be sucked, it will affect the sucker's holding of the workpiece. The size of the workpiece being held will affect the holding force of the workpiece.
150*150mmUltrapowerful Grinder Sucker Cnc Permanent Magnetic Engraving Machine - The surface of the workpiece to be sucked should be flat. If there are pits or grooves on the surface of the workpiece to be sucked, it will affect the sucker's holding of the workpiece. The size of the workpiece being held will affect the holding force of the workpiece.
150*150mm XM9 Surface Grinder Magnetic Chuck Grinding Disk Grinding Machines - XM91 150 150mm Surface grinder permanent magnetic chuck grinding disk applicable to grinding machines and other processing. Specifications: 150 150mm. Applicable to grinding machines, EDM EDM, line cutting, tapping machines, bench drill and.
CNC super powerful permanent magnet chuck Machining magnetic table 150*150mm - The disk adopts high-performance N45 neodymium iron boron, strong magnetic force and never demagnetization, no energy consumption, and increase the clamping efficiency by more than 80%. 18 18 large squares, each square can reach about 40KG magnetic force.
Permanent Magnetic Chuck Workholding Table For Surface Grinding Milling Power - Worktable precision no change while magnetizing and demagnetizing. This Super powerful 12" x 12" Magnetic Chuck is mainly used in a variety of surface grinding machine. tool grinding machine as a workpiece positioning processing.
Magnetic Chuck 6.3" Round Fine Pole Permanent Magnetic Chuck 160mm Metalwork - Put the workpiece on the suction table, and then insert the wrench into the shaft hole to turn clockwise180°, the workpiece can be sucked for processing. The workpiece is completed, the wrench can be inserted into the shaft hole to turn counterclockwise 180 °, you can remove the workpiece.
Round Surface Grinder Magnetic Chuck Permanent Magnetic Chuck 250mm Grinding - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a work piece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
Magnetic Chuck 10*20" Permanent Magnetic Chuck Fine Pole for Grinding Machine US - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
Fine Pole Permanent Magnetic Chuck 6×6 in for Grinding Milling Machine Powerful - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
Fine Pole Permanent Magnetic Chuck 6*6" inch For Grinding Machine US - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
12" x 6" Rectangular Magnetic Chuck Permanent Magnet Table Close Poles+_*= - Is carefully selected to cover the widest range of workpieces on the upperplate. All like poles. Close Poles Placing. Heavy Duty and Permanent. are connected to ensure the most effective hold on single work pieces or on partial plates.
5" Heavy Round Permanent Magnetic Chuck 125mm Strong Hold Powered Poles ATOZ - ATOZ circular chucks, apart from grinding have ample reserves of power for withstanding fast finishing cuts, when turning. 5" / 125mm Round Magnetic Chuck. The capacity of lathe is increased by fitting a permanent magnetic chuck.
4" Heavy Round Permanent Magnetic Chuck 100mm Strong Hold Powered Poles ATOZ - ATOZ circular chucks, apart from grinding have ample reserves of power for withstanding fast finishing cuts, when turning. 4" / 100mm Round Magnetic Chuck. The capacity of lathe is increased by fitting a permanent magnetic chuck.
New Powerful Permanent Magnetic Chuck Workhold For Grinding Machine Bench Drills - Suitable for grinding machines, EDM electric sparks, wire cutting, tapping machines, bench drills and other processing. Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing.
Magnetic Chuck 10×20inch for Grinding Milling Machine Lathe Magnets - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. To prolong service life of the disk, it can be placed on the cutting fluid for storage.
Magnetic Chuck Round for Grinding Milling Machine Diameter 9.84inch - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a work piece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
100*175mm Fine Pole Surface Permanent Magnetic Chuck Workholding For Grinding - Specification 100 175MM. Sine permanent magnet chuck is suitable for various plane of grinder, single angle precision grinding EDM machines. Selecting high quality materials, strong suction, small remanence, magnetic uniform distribution.
100*175mm Permanent Magnetic Chuck Single Tilting Permanent Magnetic Chuck - Specification 100 175MM. Sine permanent magnet chuck is suitable for various plane of grinder, single angle precision grinding EDM machines. Selecting high quality materials, strong suction, small remanence, magnetic uniform distribution.
6.1/2" 165mm Permanent Round Magnetic Chuck High Power - 6.1/2" ROUND CIRCULAR MAGNETIC CHUCK. MAGNETIC CHUCK TABLE ROUND 6.1/2" / 165 MM. ON / OFF SWITCH TO RELEASE WORK PIECE. USED ON GRINDING MACHINES, SURFACE GRINDERS, FOR HOLDING DOWN THE WORK PIECE SECURELY.
Large Suction Permanent Magnetic Chuck Single Sine Plate 6*6 inch Chuck 15*15cm - It has the characteristics of high precision, uniform suction and safe use. It is a kind of magnetic suction cup for angle processing and positioning. permanent magnetic fine suction cup is mainly used for work piece processing and positioning on various surface grinders and tool grinders.
NEW Magnetic Chuck 6.3 Inch Round Fine Pole Permanent Magnetic Chuck 160mm - Round Fine Pole Permanent Magnetic Chuck 160mm. Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. Strong dense pole permanent magnet sucker is for surface grinder, sparks machine, WEDM.
NEW Fine Pole Permanent Magnetic Chuck 6×6 inch For Grinding Machine US Stock - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
100*175mm Sine Permanent Magnetic Chuck Single Tilting - Sine permanent magnet chuck is suitable for various plane of grinder, single angle precision grinding EDM machines. Selecting high quality materials, strong suction, small remanence, magnetic uniform distribution.
Surface Grinder Permanent Magnetic Chuck For Grinding Machine 100*175mm/ 4''×7" - Model: 100 175mm (4"x7"). 1 X Permanent Magnetic Chuck 100mm 175mm. Applicable to grinding machines, EDM EDM, line cutting, tapping machines, bench drill and other processing. Magnetic pole gap fine, uniform magnetic force, small workpiece processing, the effect is particularly evident.
6" Round Permanent Magnetic Chuck 150mm Strong Workhold Powered Premium Quality - The capacity of lathe is increased by fitting a permanent magnetic chuck. The solid construction is based on the solid assembly of components. TORRENS HIGH POWER MAGNETIC TOOLS. Assembled with powerful magnets.Fine, solid mild steel made.Easy operated On-Off lever.Heavy Duty and Permanent.Ease of installation and operation.
6"X12" Permanent Magnetic Chucks /Fine Pole #Pmc-612F- New - 6x12" perminent magnetic chuck---fine pole 1/8"magnetic steel and 1/8" non-magnetic steel. Uniform holding power, height 2". Solid top and bottom plates--furnace brazed. Can be machined or drilled to a depth equal to thickness of the top plate minus 1/8".
4"X7" Permanent Magnetic Chucks /Fine Pole-#Pmc-47F- New - 4x7" perminent magnetic chuck---fine pole 1/8"magnetic steel and 1/8" non-magnetic steel. Uniform holding power, height 2.50". Solid top and bottom plates--furnace brazed. Can be machined or drilled to a depth equal to thickness of the top plate minus 1/8".
6x12 inch Fine Pole Magnetic Chuck Machining Workholding Permanent New - This magnetic lifter is made with neodymium magnets which are used for lifting steel sheets, blocks, rods, cylinders and other magnetic materials. It requires no electricity. We used advanced N45 Magnet Material with safety factor of 3.5 to provide superstrong magnetism for you, and its max pulling power equals to 450kg/ 992lbs, while most of our competitors use N40/N42 magnet material whose safety factor is between 2 to 2.5.
ECLIPSE ROUND MAGNETIC MAG CHUCK ax475c ENGLAND 4-3/4" circular - ECLIPSE ROUND MAGNETIC MAG CHUCK ax475c ENGLAND 4-3/4" circular condition and dimensions as shown in pics, magnet works, removable lever part is not included G5 apo fpo po box ak hi pr shipping may be extra
Square CNC Magnetic Chuck 12*12in Workholding Permanent 200N / cm2 - High-performance magnetic steel disk, with suction, almost no remanence. Suction can be 200N / cm2. Suction: ≥ 200N / c ㎡. Put the workpiece on the suction table, and then insert the wrench into the shaft hole to turn clockwise180°, the workpiece can be sucked for processing.
6"*6" Permanent Magnetic Chuck for Grinding Milling Machine Lathe Magnet - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
6" Round Permanent Magnetic Chuck 150mm Strong Workhold Powered Magnetic Bed - The capacity of lathe is increased by fitting a permanent magnetic chuck. The solid construction is based on the solid assembly of components. TORRENS HIGH POWER MAGNETIC TOOLS. Assembled with powerful magnets.Fine, solid mild steel made.Easy operated On-Off lever.Heavy Duty and Permanent.Ease of installation and operation.
6" x 4" Permanent Magnetic Chuck Standard Poles High Quality Magnetic Bed - Is carefully selected to cover the widest range of work pieces on the upper plate. All like poles. PERMANENT MAGNETIC CHUCK RECTANGULAR. advice and should never dismantle the chuck. TORRENS HIGH POWER MAGNETIC TOOLS.
10"x5" Permanent Magnetic Chuck Standard Poles 250mm x 125mm Magnetic Bed - 10" x 5" Permanent Magnetic Chuck Standard Poles 250mm x 125mm. All like poles are connected to ensure the most effective hold on single work pieces or on partial plates. Standard Poles. TORRENS HIGH POWER MAGNETIC TOOLS.
9.84" Round Permanent Magnetic Chuck 250mm Diameter with Standard Poles Table - Worktable precision no change while magnetizing and demagnetizing. No electricity is needed which avoid the workpiece falling off due to sudden power failure. High-performance magnetic steel disk, with suction, almost no remanence.
INTBUYING 10" x 20" Fine Pole Magnetic Chuck Machining Workholding Permanent - It requires no electricity. We used advanced N45 Magnet Materialwith safety factor of 3.5 to provide superstrong magnetism for you, and its max pulling power equals to 450kg/ 992lbs, while most of our competitors use N40/N42 magnet material whose safety factor is between 2 to 2.5.
Fine Pole Permanent Round Strong Magnetic Chuck Diameter 160mm Magnet Sucker US - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
160 mm Round Permanent Magnet Chuck Strong Detail Disk Precision Disk - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a work piece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
Lathe Magnets Permanent Magnetic Chuck 6*6" for Grinding Machine - It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker. To prolong service life of the disk, it can be placed on the cutting fluid for storage.Six-surface fine grinding processing, the sucker can be used in vertical direction on the wire cutting machine cutting.
10"x5" Permanent Magnetic Chuck Close Poles 250mm x 125mm Strong pole - 10" x 5" Permanent Magnetic Chuck close Poles 250mm x 125mm. All like poles are connected to ensure the most effective hold on single work pieces or on partial plates. Close Poles. Pole spacing is carefully selected to cover the widest range of work pieces on the upper plate.
6"X12" Permanent Magnetic Chuck Magnetic Fine Pole High Quality Premium New - It requires no electricity. We used advanced N45 Magnet Material with safety factor of 3.5 to provide superstrong magnetism for you, and its max pulling power equals to 450kg/ 992lbs, while most of our competitors use N40/N42 magnet material whose safety factor is between 2 to 2.5.
8" - 200 MM Round Permanent Magnetic Chuck Fine Pole Heavy Duty Power - 8" ROUND CIRCULAR MAGNETIC CHUCK. MAGNETIC CHUCK TABLE ROUND 8" / 200 MM. Hurry Up ! ON / OFF SWITCH TO RELEASE WORK PIECE. Date format used in India is DD / MM / YYYY. USED ON GRINDING MACHINES, SURFACE GRINDERS, FOR HOLDING DOWN THE WORK PIECE SECURELY.
6.1/2" 165mm Permanent Round Magnetic Chuck High Power - 6.1/2" ROUND CIRCULAR MAGNETIC CHUCK. MAGNETIC CHUCK TABLE ROUND 6.1/2" / 165 MM. Hurry Up ! ON / OFF SWITCH TO RELEASE WORK PIECE. USED ON GRINDING MACHINES, SURFACE GRINDERS, FOR HOLDING DOWN THE WORK PIECE SECURELY.
17" / 18" ? Diameter Round Magnetic Chuck Surface Grinding Workholding - This part was pulled from a working machine. This part was pulled from a working machine and is being sold in good working condition unless otherwise stated! We have no way of testing it once it was removed.
9.84" Round Permanent Magnetic Chuck Diameter 250mm Standard Poles Table - Worktable precision no change while magnetizing and demagnetizing. Magnetic Chuck 250mm. Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a work piece positioning processing.
Permanent Magnetic Chuck For Grinding Machine 4" x 7" Manufacturing Workholding - Permanent Magnetic Chuck 4" X 7" Machining Workholding Grinding Machine 100N-120N Suction Force. Permanent Magnetic Chuck 4" X 7" Machining Workholding 100N-120N Suction Force. The Magnetic Chuck Can Be Used For Processing Various Magnetic Conduction Work Pieces.
4" x 7" Magnetic Chuck Machining Workholding Permanent - 4" X 7" Permanent Magnetic Chuck For Grinding Machine Machining Workholding. 4" x 7" Permanent Magnetic Chuck. Magnetic Pole Gap Fine, Uniform Magnetic Force, Small Workpiece Processing, The Effect Is Particularly Evident.
Permanent Magnetic Chuck 6*6 inch For Grinding Milling Machine Lathe Magnets - Magnetic Chuck is mainly used in a variety of surface grinding machine, tool grinding machine as a workpiece positioning processing. It has the features of high precision, uniform suction and safety, so that it is a processing positioning sucker sucker.
6'' x 12'' Fine Pole Permanent Magnetic Chuck Workholding For Grinding 6x12 - 6" x 12" Fine Pole Magnetic Chuck. Pole Size: 0.70". Steel Pole Spacing: 1/16". Brass Pole Spacing : 1/32". Handle Moves Easily To Turn Chuck On Or Off. Can Be Drilled Or Machined To A Depth Equal To Thickness Of The Top Plate Minus.
10" Round Magnetic Chuck-fine pole-#H9603F-new - PERMANENT MAGNETIC ROUND CHUCK. CLOSE POLE. IT CAN BE DRILLED OR MACHINED TO A DEPTH EQUAL TO THICKNESS OF THE TOP PLATE MINUS 1/8". THE TOP PLATE IS FURNACE BRAZED. MAKE A SOLID ONE PIECE UNIT.
Hanchett Magna Lock Corp. 5 x 10 Magnetic Chuck - NOS (Inv.22177) - Hanchett Magna Lock Corp. Magnetic Chuck - NOS. (Inv.22177). Magnetic surface is not rusty. It is just covered in factory rust preventative coating. Not What You Were Looking For?. Model HV-510.
Powerful Permanent Magnetic Chuck 150*300mm (6"x12") HMT-1530A - TAICHONG Powerful Permanent Magnetic Chuck150 300mm (6"x12" ). Water-resistance property enables whole chuck to be used in liquid. Average magnetic force beyond 10kg/cm². Pole Pitch: 11.2(1.6+2+1.6+6)mm.
Powerful Permanent Magnetic Chuck 150*350mm (6"x14") HMT-1535A - TAICHONG Powerful Permanent Magnetic Chuck150 350mm (6"x14" ). Water-resistance property enables whole chuck to be used in liquid. Average magnetic force beyond 10kg/cm². Pole Pitch: 11.2(1.6+2+1.6+6)mm.
Powerful Fine-Pole Permanent Magnetic Chuck 125*250mm (5"x10") HMTW-1325A - TAICHONG Powerful Fine-Pole Permanent Magnetic Chuck 125 250mm (5"x10" ). Pole Pitch: 2(1+1)mm. The fine-pitch magnetic poles make it ideally suitable for small and thin workpieces. Dual switches for chuck larger than 300mm in width.
Powerful Permanent Magnetic Chuck 100*175mm (4"x7") HMT-1018A - TAICHONG Powerful Permanent Magnetic Chuck 100 175mm (4"x7" ). Water-resistance property enables whole chuck to be used in liquid. Average magnetic force beyond 10kg/cm². Pole Pitch: 11.2(1.6+2+1.6+6)mm.
Powerful Fine-Pole Permanent Magnetic Chuck 100*175mm (4"x7") HMTW-1018A - TAICHONG Powerful Fine-Pole Permanent Magnetic Chuck 100 175mm (4"x7" ). Pole Pitch: 2(1+1)mm. The fine-pitch magnetic poles make it ideally suitable for small and thin workpieces. Dual switches for chuck larger than 300mm in width.
Powerful Permanent Magnetic Chuck 125*250mm (5"x10") HMT-1325A - TAICHONG Powerful Permanent Magnetic Chuck 125 250mm (5"x10" ). Water-resistance property enables whole chuck to be used in liquid. Average magnetic force beyond 10kg/cm². Pole Pitch: 11.2(1.6+2+1.6+6)mm.
Powerful Fine-Pole Permanent Magnetic Chuck 200*500mm (8"x20") HMTW-2050A - TAICHONG Powerful Fine-Pole Permanent Magnetic Chuck 200 500mm (8"x20" ). Pole Pitch: 2(1+1)mm. The fine-pitch magnetic poles make it ideally suitable for small and thin workpieces. Dual switches for chuck larger than 300mm in width.
Powerful Fine-Pole Permanent Magnetic Chuck 150*150mm (6"x6") HMTW-1515A - TAICHONG Powerful Fine-Pole Permanent Magnetic Chuck 150 150mm (6"x6" ). Pole Pitch: 2(1+1)mm. The fine-pitch magnetic poles make it ideally suitable for small and thin workpieces. Dual switches for chuck larger than 300mm in width.
Powerful Fine-Pole Permanent Magnetic Chuck 150*400mm (6"x16") HMTW-1540A - TAICHONG Powerful Fine-Pole Permanent Magnetic Chuck 150 400mm (6"x16" ). Pole Pitch: 2(1+1)mm. The fine-pitch magnetic poles make it ideally suitable for small and thin workpieces. Dual switches for chuck larger than 300mm in width.
Powerful Fine-Pole Permanent Magnetic Chuck 200*400mm (8"x16") HMTW-2040A - TAICHONG Powerful Fine-Pole Permanent Magnetic Chuck 200 400mm (8"x16" ). Pole Pitch: 2(1+1)mm. The fine-pitch magnetic poles make it ideally suitable for small and thin workpieces. Dual switches for chuck larger than 300mm in width.
4" Round Magnetic Chuck--fine pole-#H9603A-new - PERMANENT MAGNETIC ROUND CHUCK. CLOSE POLE. IT CAN BE DRILLED OR MACHINED TO A DEPTH EQUAL TO THICKNESS OF THE TOP PLATE MINUS 1/8". THE TOP PLATE IS FURNACE BRAZED. MAKE A SOLID ONE PIECE UNIT.
Fine Pole 6" x 6" Magnetic Chuck - 6 x 6"Fine Pole Magnetic Chuck. ● Fine Poles: 0.065" Steel Poles, 0.02" copper separators. ● 1.7" Very low profile to allow Max. work height clearan ce.
6" x 12" Fine Pole Magnetic Chuck Surface Grinder - 6 x 12"Fine Pole Magnetic Chuck. ● Fine Poles: 0.065" Steel Poles, 0.02" copper separators. ● Use powerful Rare Earth Ceramic Magnets inside. ● Size: 6" x 12" x 1.7" (T). ● 1.7" Very low profile to allow Max.
Electro Magnetic Chuck Controller WL-115C (5A) 110V - 500 watts. Works with standard type of electromagnetic chucks. Precisely adjust the magnetic force of electromagnetic chucks with indicated LED. Will work for all kind of electromagnetic chucks such as Walker Magnetic Chucks with similar specs.
Electro Magnetic Chuck Controller WL-115C (5A) 220V - 500 watts. Works with standard type of electromagnetic chucks. Precisely adjust the magnetic force of electromagnetic chucks with indicated LED. Will work for all kind of electromagnetic chucks such as Walker Magnetic Chucks with similar specs.
Powerful Permanent Magnetic Chuck 150*450mm (6"x18") HMT-1545A - TAICHONG Powerful Permanent Magnetic Chuck150 450mm (6"x18" ). Water-resistance property enables whole chuck to be used in liquid. Average magnetic force beyond 10kg/cm². Pole Pitch: 11.2(1.6+2+1.6+6)mm.
Electro Magnet Chuck Controller 5A 220V Gromax Part#GRD-505-220V - Orders under 150 lbs. Orders above 150 lbs. Will work for all kind of electro magnetic chucks such asWalker Magnetic Chucks with similar specs. Precisely adjust the magnetic force of electric magnetic chucks with indicated LED.
Rotary Fine-Pole Permanent Magnetic Chuck 150*300mm (6"x12") HMT-1530UW - TAICHONG Rotary Fine-Pole Permanent Magnetic Chuck150 300mm (6"x12" ). Integrated molding of machine body and rotary spindle. Rotary shaft with graduation makes it easy to grind at any angel. Pole Pitch: 2(1+1)mm.
Diameter 200mm Round Permanent Magnetic Chuck HRC-20 - The magnetic force can be adjusted easily. Pole Pitch: 11(2+9)mm. Orders under 150 lbs. Orders above 150 lbs. Weight: 15 kg (33.5 lbs.). 100% Made in Taiwan. Other models are available. Piscataway Office.
Diameter 200mm Round Fine-Pole Permanent Magnetic Chuck HRW-20 - Pole Pitch: 2(1+1)mm. The magnetic force can be adjusted easily. Suitable for grinding thin and small workpieces. Orders under 150 lbs. Orders above 150 lbs. Weight: 15 kg (33.5 lbs.). 100% Made in Taiwan.
Powerful Fine-Pole Permanent Magnetic Chuck 150*450mm (6"x18") HMTW-1545A - TAICHONG Powerful Fine-Pole Permanent Magnetic Chuck 150 450mm (6"x18" ). Pole Pitch: 2(1+1)mm. The fine-pitch magnetic poles make it ideally suitable for small and thin workpieces. Dual switches for chuck larger than 300mm in width.
Powerful Fine-Pole Permanent Magnetic Chuck 200*450mm (8"x18") HMTW-2045A - TAICHONG Powerful Fine-Pole Permanent Magnetic Chuck 200 450mm (8"x18" ). Pole Pitch: 2(1+1)mm. The fine-pitch magnetic poles make it ideally suitable for small and thin workpieces. Dual switches for chuck larger than 300mm in width.
Rotary Permanent Magnetic Chuck 150*300mm (6"x12") HMT-1530U - TAICHONG Rotary Permanent Magnetic Chuck150 300mm (6"x12" ). Integrated molding of machine body and rotary spindle. Rotary shaft with graduation makes it easy to grind at any angel. Pole Pitch: 11.2(1.6+2+1.6+6)mm.
Powerful Fine-Pole Permanent Magnetic Chuck 150*300mm (6"x12") HMTW-1530A - TAICHONG Powerful Fine-Pole Permanent Magnetic Chuck 150 300mm (6"x12" ). Dual switches for chuck larger than 300mm in width. Pole Pitch: 2(1+1)mm. The fine-pitch magnetic poles make it ideally suitable for small and thin workpieces.
Powerful Fine-Pole Permanent Magnetic Chuck 150*350mm (6"x14") HMTW-1535A - TAICHONG Powerful Fine-Pole Permanent Magnetic Chuck 150 350mm (6"x14" ). Pole Pitch: 2(1+1)mm. The fine-pitch magnetic poles make it ideally suitable for small and thin workpieces. Dual switches for chuck larger than 300mm in width.
4"X7" Permanent Magnetic Chucks /Fine Pole- New - 4x7" perminent magnetic chuck---fine pole 1/8"magnetic steel and 1/8" non-magnetic steel. Uniform holding power, height 2.50". Solid top and bottom plates--furnace brazed. Can be machined or drilled to a depth equal to thickness of the top plate minus 1/8".
5"X10" Permanent Magnetic Chucks /Fine Pole- New - 5x10" perminent magnetic chuck---fine pole 1/8"magnetic steel and 1/8" non-magnetic steelAlnoco type.Powerful ceramic magnets.Solid top and bottom plates--furnace brazed. Can be machined or drilled to a depth equal to thickness of the top plate minus 1/8".Uniform holding power, height 2.75"
6" Round Magnetic Chuck--fine pole-#H9603B-new - PERMANENT MAGNETIC ROUND CHUCK. CLOSE POLE. IT CAN BE DRILLED OR MACHINED TO A DEPTH EQUAL TO THICKNESS OF THE TOP PLATE MINUS 1/8". THE TOP PLATE IS FURNACE BRAZED. MAKE A SOLID ONE PIECE UNIT.
6"X12" Permanent Magnetic Chucks /Fine Pole- New - 6x12" perminent magnetic chuck---fine pole 1/8"magnetic steel and 1/8" non-magnetic steelAlnoco type.Powerful ceramic magnets.Solid top and bottom plates--furnace brazed. Can be machined or drilled to a depth equal to thickness of the top plate minus 1/8".Uniform holding power, height 2"Free shipping not including Alaska and other USA islands zip code.