HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation Hig... - The power indicator (green), the relay status indicator (red); 4. Module size: 50mm 26mm 18.5mm (L W H). COM: Relay Common Pin NC: Relay normally closed. High or Low Level Trigger Select: 1. Use High Level Trigger When ¡°IN¡± input High Level Signal, the ¡°NO¡± connect with ¡±COM¡± When ¡°IN¡± input Low Level Signal, the ¡°NC¡± connect with ¡°COM¡± 2.
1 X Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Delay Timer Relay 1 Pcs Parts Adjustable DC12V Infinite Loop Loop High Quality - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. The relay is triggered, when T1 is delayed and the relay is off, the module will open. Repeat the test circuit, for example B. 1 minute, and then close the test loop for 1 minute.
Timer Delay Relay Module Adjustable Timer Turn DC 12V OFF Switch Time Relay - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
DC12V 60V Electric Tricycle Buzzer 2Pins Buzzer Beep Flasher Relay Turn Signal - Buzzer Beep Flasher Relay. LED turn signal flasher modification, use of advanced SMD chip technology, with automatic short circuit protection, automatic overload protection, reverse polarity protection automatically, allowing LED with steady work.
Normally Open Relays Module Digital Delayer Time Controller Delay Device (DC24V) - Style: DC12V, DC24V, AC110-220V. When the module is powered on, it will start directly. Long press "SET" to enter the code setting mode, press "uptriangle sign " or "downtriangle sign " to switch the code, after selecting, short press "SET" to enter the code setting, after setting, press the "standby" key or no operation within 3 seconds to save the setting.
Normally Open Relays Module Digital Delayer Time Controller Device (AC110-220V) - When the module is powered on, it will start directly. Working power: DC12V DC 24V AC110V~220V. Long press "SET" to enter the code setting mode, press "uptriangle sign " or "downtriangle sign " to switch the code, after selecting, short press "SET" to enter the code setting, after setting, press the "standby" key or no operation within 3 seconds to save the setting.
Normally Open Relays Module Digital Delayer Time Controller Delay Device (DC12V) - Working power: DC12V DC 24V AC110V~220V. Style: DC12V, DC24V, AC110-220V. When the module is powered on, it will start directly. Long press "SET" to enter the code setting mode, press "uptriangle sign " or "downtriangle sign " to switch the code, after selecting, short press "SET" to enter the code setting, after setting, press the "standby" key or no operation within 3 seconds to save the setting.
4pcs Time Adjustable Delay Module NE555 Timer Control Switch Board 12V DC - Using NE555 IC. 4pcs Using NE555 IC. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor. 4pcs Load switching capacity: 10A 250V AC or 10A 30V DC.
Module De Relais Module De Contrôle De Circuit De Capacité - Fonctionnalité : 1. Le module de relais est à canal unique DC 12V, la sortie et l'entrée à canal unique ont une forte capacité anti-interférence. Le module de relais est composé de matériaux de haute qualité, avec une densité élevée et une bonne stabilité.
5pcs Time Adjustable Delay Module NE555 Timer Control Switch Board 12V DC - Using NE555 IC. 5pcs Using NE555 IC. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor. 5pcs Load switching capacity: 10A 250V AC or 10A 30V DC.
30A 5V 12V 24V 1-Channel Relay Module Board With Optocoupler H/L Level Triger - 5 V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger. 12V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger. 24V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger. 30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A.
12V Display LED Timer Relay Programmable Board Buzzer Button Module Delay Switch - Source: DC4V ~ 20V (positive trigger common power button, PNP sensors, PLC signals, etc.). Signal input optocoupler isolation, anti-interference ability. S2: OK / Shift key: Press to adjust the position of the LED is blinking, which LED is blinking, S3 to adjust the value of digital tube flicker.
DC 12V 24V AC110V-220V Time Controller Programmable Normally Open Relay Home Use - Working power: DC12V DC 24V AC110V~220V. When the module is powered on, it will start directly. Long press "SET" to enter the code setting mode, press "uptriangle sign " or "downtriangle sign " to switch the code, after selecting, short press "SET" to enter the code setting, after setting, press the "standby" key or no operation within 3 seconds to save the setting.
1PCS NEW 4 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PCS NEW 2 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
5Pcs 12V 1 Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM - Features: 100% Brand new and high quality! This Internet Streaming/Media Centre TV Box is for you! Supports usual for Android apps so you can access your for email, for Facebook etc. via your TV. Best choice for yourself or your friend.
12V 4 Channel Relay Module Fault-tolerant X Way Relay Module for Home DIY Use - Features: 100% Brand new and high quality! This Internet Streaming/Media Centre TV Box is for you! Supports usual for Android apps so you can access your for email, for Facebook etc. via your TV. Best choice for yourself or your friend.
Normally Open Relays Module Digital Delayer Time Controller Device (AC110-220V) - Features: 100% Brand new and high quality! This Internet Streaming/Media Centre TV Box is for you! Supports usual for Android apps so you can access your for email, for Facebook etc. via your TV. Best choice for yourself or your friend.
DC 12 24V Trigger Cycle Timer Delay Switch Circuit Board MOS Tube Control Module - 21cm Pigeon Supplies Plastic Dehumidification Bird Egg Basin Nest Bowl Grass Mat. Car Dash Cover Mat Dashboard Pad Dashmat for Toyota Kluger/Highlander 2008-2013. To achieve fast turn-on and off the circuit, an unlimited number of switching;.
Wifi Relay Shield for WeMos D1 Mini ESP8266 Development Board - ESP8266 ESP-01S 5V Wifi Relay Module Remote Switch Phone APP Project Tool DIY. Model: D1 relay V2. Motorcycle Rear Brake Pedal. Motorcycle Oil Filler Cap. Side Stand. For Harley. For Kawasaki. For Suzuki.
1 Channel 5V Latching Relay Module with Touch Bistable Switch - Press the trigger button, the relay is locked, press again, the relay off, you can also add the trigger switch, and the use of low-level trigger. 1 x 1 Channel Self-locking Relay Module 1x Trigger Line.
Trigger Cycle Timer Delay Switch Circuit Board MOS Tube Control Module 12V 24V - To achieve fast turn-on and off the circuit, an unlimited number of switching;. P1.3: Signal trigger again, relay off, stop the clock;. P1.2: signal is triggered again, the clock is reset. Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up;.
( 3-Way Relay) Module Relay 3Way Relay Module Expansion Module - With relay indicator light, it is convenient to check the working status of relay. High quality relay, large load: AC 250V/5A, DC 30V/5A, GPIO interface. Feature: 1. Special designed for A+/B+/2B/3B/4B, 3‑way relay module.
Practical 5V/12V Relay Module High Power Relay Module 30A Stable 2 Channel - Input Current: 30A. Equipped with input power indication, relay pull‑in indicator indication, input signal status indication. Item Type: Relay Module. JUMPER ON-5V OFF-24V or 12V. Yellow jumper two pins are all inserted ON, only inserted one pin or not inserted OFF.
3-Pin/LED Turn Signal Flasher Relay 12V 3-Pin 5.5*3*3cm Adjustable Speed - This flasher relay will solve LED related turn signal indicator issues such as super flickering, no flickering, or just replacing the faulty relay. - It eliminates the use of load resistors, directly replaces OEM 3-pin flasher relays, and works with LEDs or traditional bulbs at normal flash rates.
LED Flash Relay Flash Relay Black / Orange Electric Vehicle Led Turn Signal - Features of this flasher When installing, be sure to align the feet correctly, the function of the flasher cannot be realized if the feet are wrong. 1 LED flash relay (optional). - Features: The flickering frequency of the turn signal can be adjusted, and the advanced SMD technology is adopted, with automatic short-circuit protection, automatic overload protection, and reverse-connection automatic protection, which can make the bulb work more stably.
Self-Locking Relay Module SL35B04 12V 4-Channel Relay Module - Working Current: 1 relay pulls in 37MA, 2 relay pull in 73MA, 3 relay pull in 110MA, 4 relay pull in 146MA. Instructions: When the power is turned on, the relay is turned off. Feature: 1. 4 channel self-locking bistable relay module with high quality.
Timing Timer Relay Trigger Delay ON OFF Relay Module Single Switch Circuit - The built-in watchdog circuit and dedicated reset chip of the MCU work stably and reliably. 1 Relay module. The machine repeats the test circuit, for example, a test that is energized for 1 minute and then powered off for 1 minute.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
1 Pc Solid State Aluminum Fins Heat Sink Radiator 10A-120A Accessories - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Characteristics: fast heat conduction. -Material: aluminum alloy. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
HONEYWELL R8845U1003 Relay,Switching - HONEYWELL R8845U1003. Relay,Switching. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Diversion contrary to U.S. law is prohibited.
OONO DPST 1NO 1NC 8Amp Power Relay Module, AC/DC 12V Control Voltage - This is a simple and practical passive relay module, which is very convenient to use. It can support both Normally Open and Normally Close. Two screw mounting holes are convenient for you to fix it on the wall or wooden board.
Fuse And Relay Box, Car Retrofit Socket 6 Slots Relay Block Fuse Box Kit - Safety Foremost: This ATC/ATO fuse relay box is designed with safety in mind. With a 6-slot relay holder design for ATC/ATO fuses, you can rest assured that your fuse relay is safe to use. Maximize Your Power: With a 6-slot relay panel design, this large capacity relay holder can handle up to 5 pin 40A relays and 1 slot for RTT7121 4 pin relay, giving you the power you need to get the job done.
12V Fuse And Relay Box Car Retrofit Socket 6 Slots Relay Block - Safety Foremost: This ATC/ATO fuse relay box is designed with safety in mind. With a 6-slot relay holder design for ATC/ATO fuses, you can rest assured that your fuse relay is safe to use. Maximize Your Power: With a 6-slot relay panel design, this large capacity relay holder can handle up to 5 pin 40A relays and 1 slot for RTT7121 4 pin relay, giving you the power you need to get the job done.
AT318151 DC 12V Relay for John Deere Excavator 17D 27D 35D 50D Control Unit - Parts Number: AT318151. of your car and we will check if the part fits specifically your vehicle. Although we have tried our best to make sure that the pictures are accurate,because of the difference of the light and screen, the color of the product may be slightly different from the picture.Actual commodity to prevail in kind.
DC 12V RS485 Modbus RTU Relay Module UART Serial Port Switch PLC Digital Output - DC 12V RS485 Modbus RTU Relay Module UART Serial Port Switch PLC Digital Output Expansion Board Support 03 06 16 Function Code. MODBUS RTU command, Support 03 06 16 function code. Under the MODBUS command mode, it can support up to 64 devices in parallel.
12V Fuse and Relay Box,Car Retrofit Socket 6 Slots Relay Block,Car Fuse Box Kit - Safety Foremost: This ATC/ATO fuse relay box is designed with safety in mind. With a 6-slot relay holder design for ATC/ATO fuses, you can rest assured that your fuse relay is safe to use. Maximize Your Power: With a 6-slot relay panel design, this large capacity relay holder can handle up to 5 pin 40A relays and 1 slot for RTT7121 4 pin relay, giving you the power you need to get the job done.
2PCS DC 5V Time Relay Module Power off Trigger Cycle Timming Circuit Switch LCD - P7: Signal hold function: The signal is maintained, the timing is cleared, and the relay conduction; when the signal disappears, the relay disconnects after the timing OP; during the timing, there is another signal and the timing is cleared;.
1/2/5/10PCS 5V 2 Channel RS232 Serial Control Relay Switch Board SCM PC Relays - With capacitor filter circuit, with improved stability. Onboard 2 relay (which can be accessed extended 2-way relay module). Each relay has a LED indicator, LCD lights relay absorption. Simple to operate, most serial instruction are single byte instruction.
5PCS 5V Time Delay Relay Module Power off Trigger Cycle timer Circuit Switch LCD - P7: Signal hold function: The signal is maintained, the timing is cleared, and the relay conduction; when the signal disappears, the relay disconnects after the timing OP; during the timing, there is another signal and the timing is cleared;.
10PCS 12V Four 4 Channel Relay Module For PIC AVR DSP ARM MSP430 For Arduino - Apply superior SONGLE relay, SPDT(single-pole double-throw), one common port, one NO and one NC. Maximum output of relay: DC30V 10A, AC250V 10A. Indication LED's for Relay output status. Low level actuation(indicator ON), high level release(indicator OFF).
DC12V LED Display Digital Delay Relay Timer Control Switch Module PLC Automation - Ensure stability, industrial grade circuit boards, class PLC. This product is a new digital LED countdown display 12v delay module module. products are working low-power mode, press the left button to turn off the digital display or begin to show.
(Lot of 28) NEW Potter & Brumfield 27E895 Relay Sockets for K10 2 Pole 10A 300V - (28) P&B 27E895 Relay Sockets. Cat.No.: 27E895. Manufacturer:Potter & Brumfield P&B. Manufacturer: Potter & Brumfield. Sockets for K10 relays. These sockets are in their original bags as shown, except one that was opened for photography.
Trigger Cycle Timer Sleep Mode Delay Switch Lower Internal Resistance - Adding sleep mode, automatically turn off the display without any operation within 5 minutes, any key to wake up after enabling. Feature: 1. Output Capacity: DC 5V--36V, continuous current 15A at room temperature, power 400W.
Bailey 258178A1 Spare Parts Kit - Hoisting and Rigging. Fuse Holder. Category:Relay Parts and Accessories. Safety and Security. Shock Absorbers. Flow Indicators. Electrical Enclosures. Rotary Lobe Blowers.
SQUARE D CC180.0 Thermal Unit,78.4 to 123A - SQUARE D CC180.0. Thermal Unit,78.4 to 123A. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
ESP8266 ESP-01S 5V Wifi Relay Module Remote Switch Phone APP Project Tool DIY - Communication: WIFI (ESP8266 module). WUZEI MTB Bike Crank GXP to BCD 104MM for XX1 X0 X9 Crank Convert ProtectorSpeed. This relay is based on ESP-01S WIFI module. Adjustable Hafny Handlebar Safe Rearview Side Mirror Bike Stainless Steel Black.
Supco Syt-3 Solid State Thermal Relay With Tk Converison Kit 96235 - SCL #: 96235. SOLID STATE THERMAL RELAY WITH TK CONVERISON KIT. SOLID STATE RELAY WITH TK CONVERISON KIT, ANY POSITION, 1/3 HP, INCLUDES: BLACK WIRE, WHITE WIRE, AND RED WIRE, WEIGHT: 1-OZ, DIMS: 1-1/4"H X 2-1/8"W X 3"D.
ESP32 WIFI Bluetooth BLE Relay Module ESP32-WROOM-32E Development Board - Onboard ESP32 module IO0 programmable button and reset button. 1x AC/DC Relay Module. 1 programmable LED and relay indicator onboard. Onboard mature and stable ESP32-WROOM-32E module, large-capacity 4MByteFlash.
10PCS 4 Four Channel Relay DC5V Optocoupler Module For Arduino PIC ARM AVR - 10PCS 4 Channel Relay Module DC 5V With Optocoupler For Arduino PIC ARM AVR DSP. This is a 5V 4-Channel Relay interface board. 5V Relay Module 4-Channel. 5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current.
DC 6-30V Time Delay Relay Module Programmable Timer Relay Control Switch - XY-WJ01: DC 30V 10A and AC 220V 5A. XY-WM01: DC 30V 10A. XY-DJ01: DC 30V 30A and AC 220V30A. 5.5 minutes without any operation into a low-power state. Any action wake up. P8/P9 mode, The pause button as a trigger signal in the Run interface, Short / Long press fail.
2PCS ESP8266 220V 10A DC 7-30V Network Relay ESP-12F WIFI Module - With ESP8266 Wifi module,4-layers board design. 2PCS ESP8266 220V 10A Network Relay WIFI Module. 220V 10A relay, one normally open, one normally closed. One way optocoupler isolation input, TVS input protection.
10PCS DC 12V Digital LED Tube Multi-function Delay Relay Module Switch Control - NO: normal open (before relay closes, this pin is not connected. after relay closes, the pin short-connects with COM). NC: Normal closed (before relay closes, this pin short-connect with COM. after relay closes, the pin is not connected ).
DC 12V 24V 30A Motor Controller Relay Module Forward Reverse Control Board New - 3 Maximum load current: 15A (relay maximum load 30A);. Rotation; during rotation, if there is a reverse rotation limit signal, the reverse rotation will be stopped. 6 Working current (excluding motor): quiescent current: 5MA, forward or reverse working current: 70MA.
SSR Relay Radiator Aluminum Heat Sink Dissipation for 10-40A Relay - SSR single-phase relay cooling base suit for relay 10A-40A. Heat Sink only, Relay not included here. Made of durable aluminum material, mountable heat sink design, compact size, easy to install. Fit for: Relay 10A-40A.
DC 48V Over Under Voltage Protection Relay Switch for DVRD System - Model: DVRD - 12/24/36/48(Optional). DC 48V: 52-68V. DC 48V: 40-56V. Monitoring circuit: direct current circuit. Standard modular structure, guide rail type installation. DC 12V: 13-17V. DC 24V: 26-34V.
DC 48V DVRD Protection Relay - Over/Under Voltage Safety Switch - Model: DVRD - 12/24/36/48(Optional). DC 48V: 52-68V. DC 48V: 40-56V. Monitoring circuit: direct current circuit. 2 indicator lights indicate various working conditions. Display mode: normal, action 2 lights indicate the working status.
Multifunctional Delay Relay - DIN Rail Mount - AC/DC 12V~240V - 10 Modes - Relay working status is indicated by indicators. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Output relay indication: red. Setting accuracy: 10%. Temperature fluctuation error: 0.05\/℃, at = 20℃.
Powerful DIN Rail Multifunction Timer Relay for Reliable Delay Control - Relay working status is indicated by indicators. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Output relay indication: red. Power consumption: AC0.09-3VA/DC0.05-1.7W.
DIN Rail Mount Multi Delay Relay w/ 10 Functions AC/DC 12V-240V - With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Relay working status is indicated by indicators. Output relay indication: red. Setting accuracy: 10%. Temperature fluctuation error: 0.05\/℃, at = 20℃.
5PCS DC 12V Smart Wifi Wireless Self-lock Switch Delay Relay Module - 5PCS DC 12V ESP8285 Wifi Wireless Self-lock Switch Relay Module By APP for IOS Android. Wifi Working Frequency:2.4G 802.11 b/g/n. Transportation Mode:Wifi. and the Android version in Google Play. This does not affect your statutory rights.
Multifunction Delay Relay - DIN Rail Mount - AC/DC 12V to 240V - 10 Functions - With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Relay working status is indicated by indicators. Output relay indication: red. Setting accuracy: 10%. We will always make every attempt possible to resolve issues if we made a mistake.
DIN Rail Multifunction Delay Timer Relay AC/DC 12V~240V - 10 Functions - With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Relay working status is indicated by indicators. Output relay indication: red. Temperature fluctuation error: 0.05\/℃, at = 20℃.
Versatile Multifunctional Relay - DIN Rail Mount Compatible - Relay working status is indicated by indicators. Output relay indication: red. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Setting accuracy: 10%. Mounting altitude:≤2000m.
Multifunctional Time Delay Relay for DIN Rail Mounting AC/DC 12V~240V - Relay working status is indicated by indicators. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Output relay indication: red. Setting accuracy: 10%. Mounting altitude:≤2000m.
10 Function Multifunctional Relay DIN Rail Mount Timer 12V~240V - Relay working status is indicated by indicators. Output relay indication: red. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Setting accuracy: 10%. Temperature fluctuation error: 0.05\/℃, at = 20℃.
DIN Rail Relay Multifunction Delay Timer 10 Functions AC/DC 12V-240V - With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Relay working status is indicated by indicators. Output relay indication: red. Temperature fluctuation error: 0.05\/℃, at = 20℃.
Multifunction DIN Rail Time Delay Relay AC/DC 12V~240V - 10 Functions - With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Relay working status is indicated by indicators. Output relay indication: red. Temperature fluctuation error: 0.05\/℃, at = 20℃.
DIN Rail Multifunction Timer Relay AC/DC 12V-240V - 10 Functions - Relay working status is indicated by indicators. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Output relay indication: red. Temperature fluctuation error: 0.05\/℃, at = 20℃.
DIN Rail Mount Delay Relay - 10 Functions AC/DC 12V-240V Multifunction Timer - With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Relay working status is indicated by indicators. Output relay indication: red. Setting accuracy: 10%. Temperature fluctuation error: 0.05\/℃, at = 20℃.
Versatile DIN Rail Mount Time Delay Relay - 10 Functions AC/DC 12V~240V - With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Relay working status is indicated by indicators. Output relay indication: red. Setting accuracy: 10%. Temperature fluctuation error: 0.05\/℃, at = 20℃.
DIN Rail Mount Multifunctional Time Relay 12V-240V AC/DC - 10 Functions - Relay working status is indicated by indicators. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Output relay indication: red. Setting accuracy: 10%. Temperature fluctuation error: 0.05\/℃, at = 20℃.
DIN Rail Multifunctional Timer Delay Relay AC/DC 12V-240V - Relay working status is indicated by indicators. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Output relay indication: red. FDA declaration. Power indicator: Green.
DIN Rail Relay Multifunction Time Delay - GRT8-M1 AC/DC 12V~240V - Relay working status is indicated by indicators. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Output relay indication: red. Power consumption: AC0.09-3VA/DC0.05-1.7W.
DIN Rail Multifunction Delay Timer Relay AC/DC 12V~240V - Relay working status is indicated by indicators. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Output relay indication: red. Weight: Approx. Mounting altitude:≤2000m.
Highly-Functional DIN Rail Time Delay Relay for AC/DC 12V~240V Applications - Relay working status is indicated by indicators. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Output relay indication: red. Working temperature: -20℃~55℃. Power consumption: AC0.09-3VA/DC0.05-1.7W.
Multifunctional Delay Time Relay - DIN Rail Mount - AC/DC 12V~240V - Relay working status is indicated by indicators. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Output relay indication: red. Setting accuracy: 10%. Temperature fluctuation error: 0.05\/℃, at = 20℃.
DIN Rail Time Delay Relay with 10 Functions - AC/DC 12V~240V - With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Relay working status is indicated by indicators. Output relay indication: red. Temperature fluctuation error: 0.05\/℃, at = 20℃.
Relay Module with 10 Time Delay Functions for AC/DC 12-240V DIN Rail Mount - With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Relay working status is indicated by indicators. Output relay indication: red. Setting accuracy: 10%. Temperature fluctuation error: 0.05\/℃, at = 20℃.
Multifunctional DIN Rail Timer Relay AC/DC 12V-240V - 10 Delay Functions - With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Relay working status is indicated by indicators. Output relay indication: red. Temperature fluctuation error: 0.05\/℃, at = 20℃.
Versatile DIN Rail Time Delay Relay - 10 Functions AC/DC 12-240V - With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Relay working status is indicated by indicators. Output relay indication: red. Temperature fluctuation error: 0.05\/℃, at = 20℃.
DIN Rail Multifunction Delay Relay AC/DC 12-240V -10 Functions - With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Relay working status is indicated by indicators. Output relay indication: red. Temperature fluctuation error: 0.05\/℃, at = 20℃.
Timer Relay Multifunctional 10 Modes AC/DC 12V~240V DIN Rail Mount - Relay working status is indicated by indicators. Output relay indication: red. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Setting accuracy: 10%. Temperature fluctuation error: 0.05\/℃, at = 20℃.
DIN Rail Delay Timer Switch Multifunctional Relay AC/DC 12V~240V - Minimum switching power: 500mW. Relay working status is indicated by indicators. With 10 kinds of delay functions including delay on, delay off, cycle delay and so on. Output relay indication: red. Mounting altitude:≤2000m.
OONO DPST 1NO 1NC 8Amp Power Relay Module AC 110V 115V 120V Control Voltage - 3, Compact plastic case and wires connects for easy mount. 4, LED indication for relay action. 5, This is a simple and practical passive relay module, which is very convenient to use. It can support both Normally Open and Normally Close.
4pc Potter & Brumfield 11 pin Socket Base 27E892 NEW - 4pc Potter & Brumfield 11 pin Socket Base 27E892 loc: SR WAGYU. No warranty beyond that. I have made an honest and fair evaluation of this item, but I am only human. I do miss things occasionally, and if it is not as I have represented it, I certainly will do what I can to "make it right".
10pc Potter & Brumfield 11 pin Socket Base 27E892 NEW - No warranty beyond that. I have made an honest and fair evaluation of this item, but I am only human. I do miss things occasionally, and if it is not as I have represented it, I certainly will do what I can to "make it right".
(5V)Practical Infrared Relay Remote Control Relay Low Pulse Control - Feature: 1. 1 x 8 Channel Infrared Relay. Infrared Receiver: VS1838(or IC compatible). Infrared Codes: codes. There are 5V and 12V types available, you can choose by your needs. Item Type: Relay. Maximum Load Capacity of Relay: DC 1-110V/5A;AC 85-265V/6A.
Delay Timer Relay Time Relay Adjustable Infinite Loop Loop High Quality - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
12V for Infinite Cycle Delay Timing Timer Relay ON OFF Switch Module - The module Power-on, When triggered the relay is switched on, delay T1, and the relay disconneted. The module Power-on, When triggered the relay is switched on, delay T1,and the relay is disconneted, delay T2.
Commutateur De Commande De Module De Relais USB PCB Avec Puce De - Matériel : PCB. Le module de relais dispose d'une puce de contrôle haute performance, qui peut répondre à divers besoins de travail. Fonctionnalité : 1. Le module de relais a une longue durée de vie et peut être connecté en continu 100 000 fois.
OMRON PTFPCB Relay Socket,Standard,Square,11 Pin,PCB PK 5 - OMRON PTFPCB. Relay Socket,Standard,Square,11 Pin,PCB PK 5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GE CR123C066A Thermal Unit,0.58 to 0.65A,PK3 - GE CR123C066A. Thermal Unit,0.58 to 0.65A,PK3. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Power adapters and other modifications may be necessary for proper operation in other countries.
GE CR123C131A Thermal Unit,1.49 to 1.63A,PK3 - GE CR123C131A. Thermal Unit,1.49 to 1.63A,PK3. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Power adapters and other modifications may be necessary for proper operation in other countries.
GE CR123C778A Thermal Unit,2.53A,PK3 - GE CR123C778A. Thermal Unit,2.53A,PK3. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Power adapters and other modifications may be necessary for proper operation in other countries.
DC12V Cycle Delay Timer Relay 0-15/60/120 Minute ON-OFF Switch Adjustable - Support 2 modes, mon mode(once) and cycle mode, and you can simply switch mode by adjusting the jumper. Such cycle. T1 and T2 are set by two adjustable resistors, respectively. Cycle Mode Load Capacity: 10A(AC0-250V, DC0-30V). ).
DC 5-60V Real Time Timer Delay Relay Module Switch Control Clock Synchronization - BLL0 : Ring disable. After the relay is disabled, the product can be used as an alarm clock. Relay enable mode C-P sleep mode : within five minutes, without any operation, the digital tube automatically shut down the display, the program normal operation ;.
DC 12V Infinite Cycle Delay Time Timer Relay Turn Loop ON OFF Module Hot - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
4-CH Channel Four-way 5V relay expansion board Relay Module Shield V1.3 - Occupied Arduino ports: (relay) digital port 2,3,4,5, (wireless module) digital port 0,1. Relay Shield 1. Wireless output interface: (serial port) xbee/Bluetooth Bee/Wireless Programming Module. Relay maximum switching current: 5A.
Switch Delay Timer Relay Time Relay Tool Infinite Loop Loop High Quality - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
40 Amp 2 Channel Relay Module-7566-2 - MSD relay modules are designed to be easily installed in most automotive electrical systems where a high amperage relay is needed. Now for those of you familiar with the film, yes it is a YJ used for production, but we had a TJ and plan.
Eaton NSB D7PAD Relay Accessories 4P 16A 300V Used w/ D7PR4 & D7PF4 - MPN (Manufacturer Part Number): D7PAD. Product Condition: NSB. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! We create SKU's for their products by combining the MPN (Manufacturers Part Number) with one of the Product Conditions below.
Eaton NNB D7PAD Relay Accessories 4P 16A 300V Used w/ D7PR4 & D7PF4 - MPN (Manufacturer Part Number): D7PAD. Product Condition: NNB. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! We create SKU's for their products by combining the MPN (Manufacturers Part Number) with one of the Product Conditions below.
Eaton NSB D7PAB Relay Accessories General Purpose Relay 16A 300V - MPN (Manufacturer Part Number): D7PAB. Product Condition: NSB. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! We strive for excellence and will do anything in our power to keep you satisfied.
Eaton NNB D7PAB Relay Accessories General Purpose Relay 16A 300V - MPN (Manufacturer Part Number): D7PAB. Product Condition: NNB. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! We strive for excellence and will do anything in our power to keep you satisfied.
Eaton NSB D7PA9 Relay Accessories 300V - MPN (Manufacturer Part Number): D7PA9. Product Condition: NSB. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! "Refurbished product, fully functional and repaired to OEM or better standards".
Eaton NNB D7PA9 Relay Accessories 300V - MPN (Manufacturer Part Number): D7PA9. Product Condition: NNB. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! "Refurbished product, fully functional and repaired to OEM or better standards".
Eaton NSB D4PA1 Relay Accessories 1P 10A 250V 50/60Hz - MPN (Manufacturer Part Number): D4PA1. Product Condition: NSB. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! "Refurbished product, fully functional and repaired to OEM or better standards".
Eaton NNB D4PA1 Relay Accessories 1P 10A 250V 50/60Hz - MPN (Manufacturer Part Number): D4PA1. Product Condition: NNB. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! "Refurbished product, fully functional and repaired to OEM or better standards".
Eaton NSB D3PA3 Relay Accessories 600V - MPN (Manufacturer Part Number): D3PA3. Product Condition: NSB. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! "Refurbished product, fully functional and repaired to OEM or better standards".
Eaton NNB D3PA3 Relay Accessories 600V - MPN (Manufacturer Part Number): D3PA3. Product Condition: NNB. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! "Refurbished product, fully functional and repaired to OEM or better standards".
Eaton NSB D2PA6 Relay Accessories 4P 10A 300V - MPN (Manufacturer Part Number): D2PA6. Product Condition: NSB. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! "Refurbished product, fully functional and repaired to OEM or better standards".
Mitsubishi C2N624A008A Relay Circuit Board Terminal Interface - MPN: C2N624A008A. Prefer to pick it up yourself?. Will there be a dock or forklift. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
Eaton NSB ARC Relay Accessories AR Relay Cartridge 600V - Product Condition: NSB. OEM ,NSB, NNB, NWD, andREF. MPN (Manufacturer Part Number): ARC. Sales Phone Number: Phone Number x 1. We will respond to you within 24 hours and do our best to help you out! We are always happy to help.
(NEW) NTE R47-1A15-120 15Amp 120V Relay - USED, but in good working condition. Removed from closed plant. If your item is received in a different condition than stated (DOA, not working properly etc. NEW, in box. NEW, no box. NEW, old inventory. ).
2PCS 12V Voltage Control /Delay Switch /OverVoltage /Under Voltage Protection - Press the button of “SET” last for 3 seconds, the relay reversed. The relay will close between upper limit and lower limit. A set of conversion (normally open and normally closed). In P-1 mode, set T1 005, T2 000, then enter P-7 mode, set relay close between upper limit and lower limit range.
ZORO SELECT DIN Mounting Track, Aluminum, 39.37 In. L 18Z758 - 39.37 in, Width (In.). 1.38 in, Depth 0.31 in, Depth (In.). 0.31 in, Function Provides for Quick Installation and Removal of Relays and Sockets, For Use With DIN Rail Mount Products. Type : 35mm DIN Rail.
DC 7-38V 10A 250V 16-channel Serial Relay Module USB Power Supply for Light - 1PCS DC 7V~38V 16-channel Serial Relay Module. Maximum load: 10A/250V. This pure essential oil can be diluted for therapeutic grade and/or other applications. We will not bear the back freight if it is not the problem of product quality.
1pcs 4-Relay Module 5V with optocoupler Low-Level Trigger Compatible - Low level actuation(indicator ON), high level release(indicator OFF). Apply superior SONGLE relay, SPDT(single-pole double-throw), one common port, one NO and one NC. Indication LED's for Relay output status.
1pcs G3MB-202P 5V 1 Channel SSR Solid State Relay Module 240V 2A Output - 1Pcs 1 Channel DC 5V Solid State Relay Module G3MB-202P 240V 2A Low Level Trigger Relay Board Relais Module for Arduino. DC 5V Solid State Relay 240V 2A Output with Resistive Fuse. Quantity: 1Pcs 1 Channel DC 5V Low Level Trigger Solid State Relay Module.
NEW 5V 12V Single-Channel Relay For Bluetooth Communication IoT Smart Home - The single channel Bluetooth relay module includes one channel 5V / 10A or one channel 12V / 10A relay module and spp-c Bluetooth serial port slave module. It is a new and modified version, which is more practical and more stable.
New 5V 8X Channel Relay Module Low Level Trigger Interface Board Unit - IN1-IN8: signal trigger end, low level effective. ·NC1--NC8: normally closed interface of relay, short connected with COM before relay closing, suspended after closing. ·NO1--NO8: normally open interface of relay, suspended before suction, short connected with COM after suction.
NEW LCD Time Delay Relay Module Power off Trigger Cycle Timming Circuit Switch - P7: Signal hold function: The signal is maintained, the timing is cleared, and the relay conduction; when the signal disappears, the relay disconnects after the timing OP; during the timing, there is another signal and the timing is cleared;.
8 Channel Programmable RS485 Serial Port Relay Board Smart Home Lighting Control - Support 485 protocol, MODBUS protocol, TCP/IP protocol, UDP protocol, MQTT protocol and other communication interfaces RS485 bus, RJ45 network cable, WIFI, GPRS, 315M, 433M. The output uses 8 imported Omron 16A high-power relays, 8 optically isolated inputs, standard 485 and network cards.
Schneider Electric RUZSC2M 12A 250V 2CO Socket Din Rail Relay Base New - We can combine multiple items to one invoice, I prefer to combine within 5-7 days. When payment is received, items are shipped same or the next business day. Depending on the item(s) size we will ship via UPS, FedEx, or USPS. Any questions please ask. Thank You. Elcom Components Silverton, Oregon iT
Timing Switch Real-time Relay Module Control Synchronization Delay Timer - BLL0: Ring disable. Relay enable mode After the relay is disabled, the product can be used as an alarm clock. ON: enable relay on;. OFF: Do not turn on the relay, it is always off;. C-P sleep mode: within five minutes, without any operation, the digital tube automatically shut down the display, the program normal operation;.
Delay Timer Relay Module ON OFF Cycle ON OFF Module Durable High-Quality - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. The relay is triggered, when T1 is delayed and the relay is off, the module will open. This module uses MCU as the main chip.
SQUARE D B0.71 Thermal Unit,0.53 to 0.63A - SQUARE D B0.71. Thermal Unit,0.53 to 0.63A. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
5V 8-Channel Relay Module Low Level Trigger Interface Board - IN1-IN8: signal trigger end, low level effective. ·NC1--NC8: normally closed interface of relay, short connected with COM before relay closing, suspended after closing. ·NO1--NO8: normally open interface of relay, suspended before suction, short connected with COM after suction.
Omron P2PF-08 P2PF08 Socket lot of 3 - An item that does not function as intended and is not fully operational. this unit is working order. An item that has been used previously. The item may be a factory second or a new, unused item with defects.
41 pc lot socket relay base round 7 9 8 11 pin pole 10a 300V AMF Potter Amphenol - Lot of 41 relay control bases..9x AMF # 27E123 11 pin round..3x # 27E122 8 pin round.. 11x SPC RS-8B 8 pin round. New in package 6x RC-27E122 10a 300v 7 pin round..1xnew1xused Dayton 5x852e..Amphenol 146-103 looks to be green Bakelite..any questions plz ask thanks for looking
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Schneider Electric 6275Axxszs-Ac90 Solid State Relay,90 To 280Vac,75A - Schneider Electric 6275Axxszs-Ac90 Solid State Relay,90 To 280Vac,75A. All our parts come from a complete buyout. All parts are New unless otherwise stated in the listing. This Relay is New and will come in custom packaging. Not original box. Thanks for looking. We ship same day.
Oriental Motor SS21M 1.5A 100VAC MN2087E Control Pack 11-Pin New Old Stock - ROSS Norgren Ingersoll Rand Bimba Wilkerson Pneumatic/Hydraulic Cylinders Browning Swagelok Thomson. Heinemann AM2-A8-A 20A 250V 50/60Hz Circuit Breakers 2 Pole New No Box Lot of 3. We will do our best to describe each item to the best of our ability.
XH-M138 DC Power Control Relay Module Normally Closed Contact Relay - Input: 12V DC (relay powered). 1x Relay Module. Due to the light and screen difference, the item's color may be slightly different from the pictures. 12Pcs Artist Art Paint Brushes Watercolor Oil Painting Acrylic Flat Brush.
TAS5630 OPA1632DR Mono 600W Digital Amplifier Board Class D DC48V - Using the original TAS5630,OPA1632DR. OPA1632 is a fully differential amplifier for driving high performance audio analog-to-digital converters (ADCs). Audio quality, which provides very low noise and output drivers, this application is optimized for the design of OPA1632 with excellent gain bandwidth 180MHz 50V/ μ s and very fast conversion rate, resulting in a very low distortion of 0.000022%.
New DC 12V RS485 Modbus RTU Relay Module Support 03 06 16 Function Code - DC 12V RS485 Modbus RTU Relay Module UART Serial Port Switch PLC Digital Output Expansion Board Support 03 06 16 Function Code. MODBUS RTU command, Support 03 06 16 function code. The parity can be none parity, even parity and odd parity.
Multifunctional Delay Timer Infinite Loop Delay Dual Digital Display Time Relay - P1--2: The relay is closed after a delay of T1 (T1 timing), and after a delay of T2, the relay is released (T2 timing), and it ends. P1--5: The relay is released after a delay of T1 (T1 timing), and after a delay of T2, the relay is closed (T2 timing), and the cycle is repeated.
Timing Timer Switch Replacement TB35-N 24-Hour AC100-240V Accessory Adapter - Drive Mode: Quartz Motor. Due to the difference between different monitors, the picture may not reflect the actual color of the item. The product can provide accurate scale for clear readings. Design with clear cover, it is dust resistant.
Box Of 10 Omron P7TF-05 Relay Base Socket - Category:Relay Parts and Accessories. Fuse Holder. Gate Valves. Knife Gate Valves. Circuit Breakers. Welding and Cutting. Plug Valves. Safety and Security.
UNIVERSAL ENTERPRISE NSB UER341 Relay Accessories EA - MPN (Manufacturer Part Number): UER341. Product Condition: NSB. OEM ,NSB, NNB, NWD, andREF. We strive for excellence and will do anything in our power to keep you satisfied. We will respond to you within 24 hours and do our best to help you out!
Furnas Electric NSB K50 Relay Accessories EA - Product Condition: NSB. MPN (Manufacturer Part Number): K50. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! "Refurbished product, fully functional and repaired to OEM or better standards".
5V 8-Channel Relay Module Low Level Trigger Interface Board 138m x56mmx18.5mm - ·Module Size: 138m 56mm 18.5mm. 5V 8-Channel Relay Module Low Level Trigger Interface Board. IN1-IN8: signal trigger end, low level effective. ·NC1--NC8: normally closed interface of relay, short connected with COM before relay closing, suspended after closing.
Hp Agilent 44471A General Purpose Relay - This lot is for oneHP 44471A Card. This unit will arrive in the condition shown. A signed credit card authorization form is required for all orders paid with credit card. We directly accept US issued credit cards.
5V 8-Channel Relay Module Low Level Trigger Interface Board For PLC Control - 5V 8-Channel Relay Module Low Level Trigger Interface Board. IN1-IN8: signal trigger end, low level effective. ·NC1--NC8: normally closed interface of relay, short connected with COM before relay closing, suspended after closing.
5V 8-Channel Relay Module Low Level Trigger Interface Board For PLC Control - 5V 8-Channel Relay Module Low Level Trigger Interface Board. IN1-IN8: signal trigger end, low level effective. ·NC1--NC8: normally closed interface of relay, short connected with COM before relay closing, suspended after closing.
1 Piece 8-Channel 5V Relay Module Low Level Trigger Interface Board - ·NC1--NC8: normally closed interface of relay, short connected with COM before relay closing, suspended after closing. 1 x 5V 8-Channel Relay Module. IN1-IN8: signal trigger end, low level effective.
Relay Module For 4b 3b 8 Channel 5V Extension Board PLC Contro Hot - Feature: 1. Equipped with relay indicator light, easy to check the working status of the relay. This relay module using standard guide rail designs, easy to install and use. Item Type: Relay Module for.
Relay Module For 4b 3b 8 Channel 5V Extension Board PLC Contro New - Feature: 1. Equipped with relay indicator light, easy to check the working status of the relay. This relay module using standard guide rail designs, easy to install and use. Item Type: Relay Module for.
12V 4 Channel Relay Module With Optocoupler High and Low Level Trigger - Using SMD OPTOCOUPLER isolation, driving ability, stable performance ; trigger current 5mA;. Com with low short circuit, triggering the corresponding relay is low, while the high end of the short com high trigger.
1pcs 4 Channel WiFi Delay Relay Switch APP Wireless Remote Control Module - Mode of transport: wifi 4. System: Android/ios 5.0. WI-FI frequency: 2.4 g IEEE 802.11 bgn7. Power consumption: 80ma; max 380ma if all relays are on. Insulation Resistance: 100m OHM10. Working Humidity: 40% ~ 80% Rh 15.75%.
Arduino Shield Expansion Board 6-12V with 4-CH Motors Servos Ports PS2 Remote - Arduino shield communicates with the motor driver by I2C, never occupy the data pins but leave more interfaces. - 1 x Arduino shield. - 1 x Arduino motor driver. - Support externally connection with 4 DC brush motors and 4 servos.
Timer Relay Remote Control Timing Delay 63A AC 230V For Appliances - Feature: 1. Power Consumption: <3W. Timing: Timing on and off. Automatic shutdown. When the product is in the normal circuit, it can be switched off automatically after starting, or the switch can be set to not turn off.
Timer Relay PC Brass Timing Delay 63A AC 230V For Home - Feature: 1. Timing: Timing on and off. Automatic shutdown. When the product is in the normal circuit, it can be switched off automatically after starting, or the switch can be set to not turn off.
Timing Delay 63A AC 230V PC Brass Timer Relay For Appliances - Feature: 1. Timing: Timing on and off. Automatic shutdown. When the product is in the normal circuit, it can be switched off automatically after starting, or the switch can be set to not turn off.
Timer Relay 63A AC 230V Timing Delay 1P For Home - Specification: 1P. Feature: 1. Timing: Timing on and off. Automatic shutdown. When the product is in the normal circuit, it can be switched off automatically after starting, or the switch can be set to not turn off.
Timing Delay 1P 63A AC 230V Timer Relay For Appliances - Specification: 1P. Feature: 1. Timing: Timing on and off. Automatic shutdown. When the product is in the normal circuit, it can be switched off automatically after starting, or the switch can be set to not turn off.
Timing Timer Relay Trigger Delay ON OFF Relay Module Single Switch Circuit - The built-in watchdog circuit and dedicated reset chip of the MCU work stably and reliably. 1 Relay module. The machine repeats the test circuit, for example, a test that is energized for 1 minute and then powered off for 1 minute.
Delay Timer Relay Time Relay Parts DC12V Infinite Loop Loop High Quality - MCU watchdog circuit and special reset chip. The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
Remote Control Kit Wireless Smart 3-Speed Switch For Ceiling Fan Light ID - Stable receiver Use sturdy material, durable, uniform heat dissipation and long service life. Suitable for ceiling fan lights. Maximum Power Consumption: <800W. Wireless Type: Wifi 2.4GHz. Wireless Specification: IEEE802.11 b/g/n.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
VON DUPRIN 900-2RS Option Board,2-Zone Controller - VON DUPRIN 900-2RS. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order. Power adapters and other modifications may be necessary for proper operation in other countries.
Timing Delay Controller 1-63A 2P PC Brass Easy Installation Timer Relay Energy - Saving Great Energy: Works stably under AC 120V-280V, this 2P timing relay will automatically turn off the switch to save the electricity. Specification: 2P. Feature: 1. Material: PC, brass. If you do not receive our reply within 48 hours, pls.
Remote Control Kit Wireless Smart 3-Speed Switch For Ceiling Fan Light EC - Stable receiver Use sturdy material, durable, uniform heat dissipation and long service life. Suitable for ceiling fan lights. Maximum Power Consumption: <800W. Wireless Type: Wifi 2.4GHz. Wireless Specification: IEEE802.11 b/g/n.
Omron PTF08A-E Relay Base Socket 8 Pin,Use for LY2N-J - We are willing to provide the good service,professional technology and excellent products to you. We have specilized in all kinds of PLC/CNC products for more than 14 years.
10 x Sound Voice Module For Cat3 Ethernet Cable Coupling Blac - Features: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed. 3.For use with Cat3 Ethernet cable coupling. 4.It is ideal for all voice and business system applications 5.Provides pin 1-1 RJ-11 voice coupling Specifications: Material: plastic + metal Color: Black Brand name: Unbranded Size: 2.72x2.2x1.65cm/1.07x0.87x0.65inch (LxWxH) Weight: 50g Package include: .
PZRT 4pcs Industrial Bristle Cleaning Brush Black Plastic Round Handle Anti S... - Four different brush shapes with different bristle hardness and size are always suitable for different tasks. Usage: anti-static ESD paint brush, industrial paint brush, cleaning hardware. Usage: anti-static ESD paint brush, industrial paint brush, cleaning hardware.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid-State Relay-Base NEW - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
1 X Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Essex 040-0003-03 Potential Relay For Copeland Compressors 61303 - SCL #: 61303. POTENTIAL RELAY FOR COPELAND COMPRESSORS. POTENTIAL RELAY FOR COPELAND COMPRESSORS ADDL# 75-2747. Mfg: ESSEX. World’s Largest Distributor of Excess Air Conditioning. IMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED AS GOING FREIGHT.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid-State Relay-Base NEW - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
1 X Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
LED Home Automation Delay Timer Control Switch Relay Module Digital display 12V - Users can set the relay for ,Y;for setting similar to P1-2. Short press K1,enter function offine-tuning set,The default function is:set up an electric circuit the relay first open, press the K1,there lay first close.Press again to repeat the default functionality.
NOYITO 4-Channel Micro USB Relay Module USB Smart Control Switch USB Intellig... - Manufacturer: NOYITO. COM4: common; NC4: normally closed; NO4: normally open. Connect the USB relay module to the computer and install the CH340 USB to serial chip driver 2. Open the STC-ISP, SSCOM32 such serial debugging software, select the baud rate of 9600, in hexadecimal (hex) form send A0 01 01 A2 and A0 02 01 A3 can be opened the first and second relay ; Send in hexadecimal (hex) A0 01 00 A1 and A0 02 00 A2 can be turned off the first and second relay, respectively.
Switch Delay Timer Relay Time Relay Tool Parts Adjustable DC12V Durable - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
1 X Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Trigger Cycle Timer Delay Switch 12V 24V Circuit Board MOS Tube Control Module - To achieve fast turn-on and off the circuit, an unlimited number of switching;. Mouth Protector Guard Mouthguard Boxing MMA Sparring Muay Thai Taekwondo Sports. 100/500/1000PCS 5mm Ultra Bright LED Red Light Bulb Lamp 20000mcd Super Bright.
Finder 95.05 Relay With Socket 99.02.9.024.99 - 40 and 44 series relay. 48 series only with. We are here to help and will do our best to resolve any issues. ref no: 76390. weight: 50 gm.
Remote Control Kit Wireless Smart 3-Speed Switch For Ceiling Fan Light JY - Stable receiver Use sturdy material, durable, uniform heat dissipation and long service life. Suitable for ceiling fan lights. Maximum Power Consumption: <800W. Wireless Type: Wifi 2.4GHz. Wireless Specification: IEEE802.11 b/g/n.
Relpol GZM2 /#F O1ME 4182 relay socket - Relay socket manufactured by Relpol. If you are not satisfied with the product - write to us. We issue invoices.
Dwyer 13-200861-01 Amplifier Relay Unit Used With Warranty See All Pictures - You are buying one amplifier relay unit. ROSS Norgren Ingersoll Rand Bimba Wilkerson Pneumatic/Hydraulic Cylinders Browning Swagelok Thomson. Heinemann AM2-A8-A 20A 250V 50/60Hz Circuit Breakers 2 Pole New No Box Lot of 3.
Essex 932000666-25215H Relay Coil, With Bracket 27802 - SCL #: 27802. Mfg: ESSEX. RELAY COIL, WITH BRACKET. World’s Largest Distributor of Excess Air Conditioning. Model #: 932000666-25215H. Alternate Model #: 3105A06H01. Most problems can be worked out if we just communicate.
Universal Parts A08/Skc1-1 Universal Start Kit 49076 - SCL #: 49076. Model #: A08. UNIVERSAL START KIT. CAP 72-88 MFD X 370V RELAY 3ARR3J10V6 UNIVERSAL START KIT. UNIVERSAL PARTS. Mfg: UNIVERSAL PARTS. Alternate Model #: SKC1-1. 2015 Federal Regional Standards for Heating and Cooling Products.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
DC 12V Dual LED Digital Thermostat Temperature Control Switch Sensor Module - 1 x DC12V Relay Module Dual LED Display Cycle Timing Delay Relay Module. You could switch P0 or P1 by short press SET. Relay Current: <50mA. You need wait 6s after your setting data, the module will save the date you have set after 6s.
12V 4 Channel Relay Module With Optocoupler High and Low Level Trigger - Using SMD OPTOCOUPLER isolation, driving ability, stable performance ; trigger current 5mA;. Com with low short circuit, triggering the corresponding relay is low, while the high end of the short com high trigger.
5V 1-Channel Optocoupler Relay Module for Arduino H/L Level Triger M - The module uses genuine quality relay, normally open interfaces Maximum load: AC 250V/10A, DC 30V/10A. 1-Channel relay module, with photoelectric isolation. With power and relay action indicator. Module interface.
set of 1 Serial Port Relay Module Board DC 5V 10A 8 Channels new - TX : Transmit. And module of ICSE014A have a power interface of 5V. 5V : Volt current condenser. Then open ”Relay Board Manager” to operate the module. Read ” RelayBoardManager_Reference” for details of the software.
Indicator Beep Flasher Relay Turn Signal Electric Tricycle Buzzer 2Pins Buzzer - Buzzer Beep Flasher Relay. LED turn signal flasher modification, use of advanced SMD chip technology, with automatic short circuit protection, automatic overload protection, reverse polarity protection automatically, allowing LED with steady work.
Remote Control Kit Wireless Smart 3-Speed Switch For Ceiling Fan Light Ro NE - Stable receiver Use sturdy material, durable, uniform heat dissipation and long service life. Suitable for ceiling fan lights. Maximum Power Consumption: <800W. Wireless Type: Wifi 2.4GHz. Wireless Specification: IEEE802.11 b/g/n.
Remote Control Kit Wireless Smart 3-Speed Switch For Ceiling Fan Light Ro MX - Stable receiver Use sturdy material, durable, uniform heat dissipation and long service life. Suitable for ceiling fan lights. Maximum Power Consumption: <800W. Wireless Type: Wifi 2.4GHz. Wireless Specification: IEEE802.11 b/g/n.
Single-Phase 10A-120A Aluminum-Radiator SSR-10DA-40DA Solid-State-Relay-Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
DC 12V Adjustable Infinite Cycle Delay Timer Time Relay Switch ON OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
Single-Phase 10A-120A Aluminum-Radiator SSR-10DA-40DA Solid-State-Relay-Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum-Radiator SSR-10DA-40DA Solid-State-Relay-Base... - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum-Radiator SSR-10DA-40DA Solid-State-Relay-Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Timing Timer Relay Trigger Delay ON OFF Relay Module Single Switch Circuit - The built-in watchdog circuit and dedicated reset chip of the MCU work stably and reliably. 1 Relay module. The machine repeats the test circuit, for example, a test that is energized for 1 minute and then powered off for 1 minute.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid-State Relay-Base NEW - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid-State Relay-Base NEW - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid-State Relay-Base NEW - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid-State Relay-Base NEW - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid-State Relay-Base NEW - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid-State Relay-Base NEW - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid-State Relay-Base NEW - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid-State Relay-Base NEW - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
0-6s ATDV-Y DC12V Adjustable Twin Timer Relay Control Time Switch Replace - Material : Plastic Color : Black Size : 88*58*93 MM Part number : ATDV-Y Package include : 1 pcs twin timer Voltage : DC 12V Working mode: reciprocating cycle delay, which can not only control the stopping and running cycle of one machine, but also control the alternating cycle of two machines at the same time. Contact form: a set of cyclic delay contacts; A set of instantaneous contacts and a set of loop - following delay contacts. Installation mode: panel installation. Brand Unbranded MPN Does not apply UPC Does not apply EAN Does not apply.
Car 2/3/4 holes with wire waterproof connector multi-core wiring plug socket - Waterproof plug adopts sealing joint installation, waterproof and dust-proof after installation, for cars, motorcycles and other vehicles joint use. With wire waterproof plug length 10CM, wire thickness 0.75 square pure copper core, waterproof grade IP37, current within 10A use, total length 5.4CM after installation.
For Arcade Vending Machine Time Relay / Timer Control Board Power Supply - Flower Pot Candy Color Iron Bucket Tin Garden Balcony Basket Decor Kegs. (3)AC 1250W/DC 500W electrical relay capacity. 10Pcs Lot FC-FC/PC Fiber Optic Adapter Coupler Connector Female to Female RED. PULUZ For DJI Osmo Action Tinted Dive Filters Square Dive Filter Colored Part.
Wireless Smart For Switches Curtains Remote Controls DC5V - Item Type: Wireless Smart Gateway. Wireless Technology Can be placed in any place with a socket to turn on the power and use it for the. 1 x User Manual. Material: ABS. No need to connect to the cable, plug and play, convenient to use and with good performance.
RTU Serial Protocol 485 Remote Control Relay Board for PLC PTZ Camera Motor - MODBUS RTU command. Automated industry PLC. Under the MODBUS command mode, it can support up to 64 devices in parallel. Under the "Delay" command ,the maximum delay is 255 seconds. Standby current (all relays closed) 12MA, 1 relay open 40MA, 2 relays open 67MA, 3 relays open 95MA,4 relays open 121MA,5 relays open 147MA,6 relays open 173MA, 7 relays open 198MA,8 relays open 223MA.
USB Relay Module MCU PC USB Smart Control Switch Jog Self-Locking - 1 USB Relay Module. Onboard LED power indicator and relay status indicator. Adopt military grade double-sided circuit board. Communication protocol: Serial port communication. If you do not receive our reply within 48 hours, pls.
Portable Adjustable Cycle Timer Delay On/Off Switch Relay Module DC12V,0-24hr - Type: DC5V,0-30min/DC5V,0-24hr/DC12V,0-120min/DC12V, 0-24hr/DC24V,0-15min/DC24V,0-30min (Optional) Quiescent Current: <10mA. S u pport 2 modes, mon mode(once) and cycle mode, and you can simply switch mode by adjusting the jumper.
DC 5V--36V Trigger Cycle Delay Timer Switch Turn On/Off Relay Module With LED - Output Capacity: DC 5V~36V, at room temperature, continuous current is 15A, power 400W. With enhanced heat dissipation, the current can be up to 30A. P-4: signal holding function. Automatically enter sleep mode and shut off display if no operation in 5 minutes, and will be wake up by pressing any button.
Adjustable Cycle Timer Delay On/Off Switch Relay Module DC12V,0-24hr - Type: DC5V,0-30min/DC5V,0-24hr/DC12V,0-120min/DC12V, 0-24hr/DC24V,0-15min/DC24V,0-30min (Optional) Quiescent Current: <10mA. S u pport 2 modes, mon mode(once) and cycle mode, and you can simply switch mode by adjusting the jumper.
DC 12V Cycle Delay Timer Switch Adjustable Relay Module Board Infinite - Output Capacity: DC 5V~30V, AC220V10A. Long pressing K2 can turn on/off the display. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls. 1, Press K1, the first digit flashes, press K2 to change the number;.
Adjustable Pressure Switch Normally Open QPM11-NO Switch G1/4" IP54 - High protection level of IP54,more durable and resistant to water. Protection Level: IP54. Item Type:Pressure Switch. Working Form: Adjustable Pressure. 1 x Pressure Switch. Can be used in wide temperature range between -5~60℃.
8 Channels Relay Modules Remote Control Relay Device Ethernet To RS485 - With an RS485 port, it supports Ethernet to RS485 transparent transmission. The device has an RS485 interface. The label RESET position is the factory reset button. 8-way relay, 8-channel digital input with full-open and full-off input.
DC5V-36V Trigger Cycle Delay Timer Switch Turn On/Off Relay Module W/LED Display - Output Capacity: DC 5V~36V, at room temperature, continuous current is 15A, power 400W. With enhanced heat dissipation, the current can be up to 30A. P-4: signal holding function. Automatically enter sleep mode and shut off display if no operation in 5 minutes, and will be wake up by pressing any button.
LED Display Adjustable Timer Relay Automation Control Switch Module 12V - NO: the relay normally opens the interface, and the relay is suspended before absorption, and is connected with COM short after absorption. NC: the relay normally closes the interface, and the relay is short connected with COM before absorbing and suspended after absorbing.
O111ROM DH48S-2Z LCD Display Delay Relay 8 Pin 0.01S-9999H 24VAC/DC - The relay is closely connected with the base, and the conductivity is excellent. Display: LCD Display. Power Connection: Round 8 Pin. Delay Range: 0.01S-99H99M. If you do not receive our reply within 48 hours, pls.
Relay Module 2 Channel Button Self Locking Interlock High Low Level Trigger 12V - There is a signal light for each channel to clearly know which switch is working. Particularly suitable for the electronic circuit design of students in colleges and universities, can be connected with a single chip, or add a first level amplifier to drive a relay or a small DC motor.
Single-Phase 10A-120A Aluminum-Radiator SSR-10DA-40DA Solid-State-Relay-Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum-Radiator SSR-10DA-40DA Solid-State-Relay-Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum-Radiator SSR-10DA-40DA Solid-State-Relay-Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum-Radiator SSR-10DA-40DA Solid-State-Relay-Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum-Radiator SSR-10DA-40DA Solid-State-Relay-Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum-Radiator SSR-10DA-40DA Solid-State-Relay-Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum-Radiator SSR-10DA-40DA Solid-State-Relay-Base... - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
AC Automation Digital Delay Timer Control Relay Switch Module S7J7 - The use of opto isolated input and output, enhanced - capability and consumption. Increase the -reverse function. Signal Source: Low Level Efficient. To ensure stability, industrial grade board. Display: Digital Display.
Digital Delay Timer Control Switch Automation Relay Module Board L9F3 - Increase the -reverse function. The use of opto isolated input and output, enhanced - capability. Industrial grade board to ensure stability. Product Weight(With ): 42g / 1.49oz. Size: 68 40 2 2mm / 2.67 1.57 0.86in (L W H).
New 2-channel High Level Trigger 3-32V 5A Solid State Relay Module Board Y0H0 - Trigger: High Level Trigger, 3-32V Relay Switches On (ON), 0-0.5V Relay is Switched Off (OFF). 5A solid state relay. Load Current: 5- 5A ( only). indication on switch with relay. 1 Relay Module. Using FR-4 double-sided circuit boards.
5V/12V 1 Channel Bluetooth Relay Module Control APP Switch IoT Smart Home - The single channel Bluetooth relay module includes one channel 5V / 10A or one channel 12V / 10A relay module and spp-c Bluetooth serial port slave module. It is a new and modified version, which is more practical and more stable.
5pcs New For Omron Relay Socket PTF08A-E - 1x 5pcs PTF08A-E. No one is EVER ignored! We are in endeavor to provide you best service and keep you a happy buying experience from us.
Automation Delay Timer Control Switch Relay Timing Module with L4N1 - Increase the -reverse function. Timing (Settable): 0.1~99.9 seconds; 1~999 seconds; 1~999 minutes. The use of opto isolated input and output, enhanced - capability. Industrial grade board to ensure stability.
Automation Delay Timer Control Relay Switch Module Low Level Efficient E5M3 - The use of opto isolated input and output, enhanced - capability and consumption. Increase the -reverse function. Signal Source: Low Level Efficient. To ensure stability, industrial grade board. Size: 64 38 18mm / 2.52 1.5 0.7in (L W H).
24V Digital Voltage Meter Delay Switch Module with W6N0 - Contract Resistance: ≤100mΩ(1A ). 1 Relay Module. P-1: Delay Setting(set the delay and pull );. Contract Load: 10A/277V AC 10A/30V. digital display, mounting on the, convenient and simple for user's needs.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
Single-Phase 10A-120A Aluminum Radiator SSR-10DA-40DA Solid State Relay Base - 1 x Solid-state relay radiator (optional). -Purpose: heat dissipation of solid-state relay. -Material: aluminum alloy. -Characteristics: fast heat conduction. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
2-Channel 30A Relay Board Module Optocoupler Isolation High/Low N6X9 - Using optocoupler isolation, strong - capability and stable performance. Output capacity: within 30V 30A or AC 30A. Output Capacity: within 30V 30A or AC 30A. This is a relay module with, which is convenient and practical for users.
5V 2- 30A Relay Board Module Optocoupler Isolation W/ Indicator I6S6 - Using optocoupler isolation, strong - capability and stable performance. Output capacity: within 30V 30A or AC 30A. Output Capacity: within 30V 30A or AC 30A. The module can be set high or low trigger.
2-channel High Level Trigger 3-32V 5A Solid State Relay Module Board E2F3 - Trigger: High Level Trigger, 3-32V Relay Switches On (ON), 0-0.5V Relay is Switched Off (OFF). 5A solid state relay. Load Current: 5- 5A ( only). indication on switch with relay. 1 Relay Module. Using FR-4 double-sided circuit boards.
3-Channel Relay Expansion Board For A+/B+/2B/3B/3B+ - With relay indicator, easy to view the working status of the relay. 1 Relay Expansion Board. High quality relays allow this expansion board to connect to load: ≤ 5A 250V AC or ≤ 5A 30V DC. Allowable load: ≤ 5A 250VAC / ≤ 5A 30VDC.
Digital LED 24V Trigger Delay Time Cycle Timer Control Switch Relay Module - P-3: Open T1 seconds, disconnect T2 seconds, infinite loop. P-2: A signal trigger and countdown begins, T1 seconds after, the relay open T2 seconds, then close;. The use of opto isolated input and output, enhanced anti-jamming capability and consumption.
Digital LED Trigger Delay Time Cycle Timer Control Switch Relay Module 24V - P-3: Open T1 seconds, disconnect T2 seconds, infinite loop. P-2: A signal trigger and countdown begins, T1 seconds after, the relay open T2 seconds, then close;. The use of opto isolated input and output, enhanced anti-jamming capability and consumption.
DC Digital LED Delay Time Control Switch Relay Module 24V Delay Relay with Case - P-3: Open T1 seconds, disconnect T2 seconds, infinite loop. 24V Delay Relay with Case. P-2: A signal trigger and countdown begins, T1 seconds after, the relay open T2 seconds, then close;. Short press K1,enter function offine-tuning set, The default function is: set up an electric circuit the relay first open, press the K1,there lay first close.
Digital LED Delay Time Control Switch Relay Module 24V Delay Relay with Case - P-3: Open T1 seconds, disconnect T2 seconds, infinite loop. 24V Delay Relay with Case. The use of opto isolated input and output, enhanced anti-jamming capability and consumption. P-2: A signal trigger and countdown begins, T1 seconds after, the relay open T2 seconds, then close;.
YJ00397-Phono Amplifier Board High Gain Low Noise - 1pc Phono Amplifier Board High Gain Low Noise YJ00397. n PCB adopts 1.6mm thick double-sided board, 2.0 oz copper thickness, and full tinning process to ensure PCB quality with good passing performance of large and small currents.
Kontron DIO16 3096 Board,Used,US*8425 - 8425B4/eBox/eR5/L4 Kontron DIO16 3096 Board,Used,US 8425. Certain item may be restricted and require approval to import. No Testing Done. Full Condition unknown except what described above. We may not have sufficient knowledge to test it functionality.
DC LED Automation Delay Timer Control Relay Module PCB Board White Case 12V/24V - Short press K1, enter function offine-tuning the set, the default trigger is invalid during. Relay Specifications: AC 220V 10A or DC 30V 10A. The default function is: set up an electric circuit the relay first open, press the K1,there lay first close.
LED Automation Delay Timer Control Relay Module PCB Board White Case 12V/24V - Short press K1, enter function offine-tuning the set, the default trigger is invalid during. This pure essential oil can be diluted for therapeutic grade and/or other applications. The default function is: set up an electric circuit the relay first open, press the K1,there lay first close.
12V LED Automation Timer Control Switch Dual Display Delay Relay Module w/Case - In the current mode Short press SET to switch P0, P1. Relay Specifications:AC 220V 10A or DC 30V 10A. Relay: Original 20A relays, power <1800W. System Power: 12v. The use of opto isolated input and output,enhanced anti-jamming capabilit.
12V LED Automation Delay Cycle Timer Control Switch Dual Display Relay Module - In the current mode Short press SET to switch P0, P1. Relay Specifications:AC 220V 10A or DC 30V 10A. Relay: Original 20A relays, power <1800W. System Power: 12v. The use of opto isolated input and output,enhanced anti-jamming capabilit.
Kontron REL-16 Relay Output Board,3095A,Used,US*8424 - 8424B5/eBox/eR5/L4 Kontron REL-16 Relay Output Board,3095A,Used,US 8424. Certain item may be restricted and require approval to import. No Testing Done. Full Condition unknown except what described above.
DC 12V 16 Channel RS485 Relay Module Modbus RTU Serial Protocol 485 RC Switch - MODBUS RTU command. Under the MODBUS command mode, it can support up to 64 devices in parallel. Standby current (all relays closed) 12MA, 1 relay open 40MA, 2 relays open 67MA, 3 relays open 95MA,4 relays open 121MA,5 relays open 147MA,6 relays open 173MA, 7 relays open 198MA,8 relays open 223MA.
12V for Delay Delay Relay Turn on / Delay Turn off Switch Module with Timer - With 8 for ranges selected shortest 0.1s most up to 1 hour 2. for Protection against power reversal for protection diode, better for protection module 3. Can be accessed by a large current load (250V ac 10A or 30V for 10A) 4.
SMC EX124D-SDN1-X77 Serial Transmission System 1437 - Manufactured by SMC. IMS has a specialized resale program for manufacturers! Manufacturer Part Number: EX124D-SDN1-X77. The product images shown are of the exact product you will receive. Industrial Manufacturers.
KIDDE SM120X Relay Module - KIDDE SM120X. Relay Module. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Diversion contrary to U.S. law is prohibited.
Time Adjsutable Delay Relay Modules NE555 Timming Timer Relay Control Switch - Using NE555 IC. Load switching capacity: 10A 250V AC or 10A 30V DC. Included: 1 X Delay Relay Module. The delay range is 60 seconds adjustable. Size: 55mm x 28mm, height <20mm. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
1-way Time Delay Relay Module 6-30V Micro USB Relay Control Timer Switch LCD - 5 minutes without any operation into a low- power state. Any action wake up. P7: Signal hold function: The signal is maintained, the timing is cleared, and the relay conduction; when the signal disappears, the relay disconnects after the timing OP; during the timing, there is another signal and the timing is cleared;.
Relay Module Control Board Delay Switch Controller Electronic LED DC 5V - P-3: Pulse Trigger Reversal: Give a pulse signal, the relay state reverses. Item Type: Relay Module. Feature: 1. P-4: As long as a pulse signal is detected, the relay will be closed and kept closed until the module is powered off.
5V 2 Channel Relay Module With Optocoupler Support High and Low Level Trigger - Using SMD OPTOCOUPLER isolation, driving ability, stable performance ; trigger current 5mA;. The power indicator ( green ), relay status indicator ( red ). Com with low short circuit, triggering the corresponding relay is low, while the high end of the short com high trigger.
DC5V Time Delay Relay Module Power off Trigger Cycle Timming Circuit Switch LCD - P7: Signal hold function: The signal is maintained, the timing is cleared, and the relay conduction; when the signal disappears, the relay disconnects after the timing OP; during the timing, there is another signal and the timing is cleared;.
24V 2 Channel Relay Module With Optocoupler High and Low Level Trigger - Using SMD OPTOCOUPLER isolation, driving ability, stable performance ; trigger current 5mA;. The power indicator ( green ), relay status indicator ( red ). Com with low short circuit, triggering the corresponding relay is low, while the high end of the short com high trigger.
Omron P2CF-11 Relay Socket lot of 3 - An item that does not function as intended and is not fully operational. this unit is working order. An item that has been used previously. The item may be a factory second or a new, unused item with defects.
Relay Turn Signal Electric Tricycle Buzzer 2Pins Buzzer Beep Flasher - Buzzer Beep Flasher Relay. LED turn signal flasher modification, use of advanced SMD chip technology, with automatic short circuit protection, automatic overload protection, reverse polarity protection automatically, allowing LED with steady work.
Relay Module For Mobile Phone Smart Remote Control Switch - Includes 1 channel 12V/10A relay module and for SPP-C serial port slave module. Item Type: Relay Module. Feature: 1. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls.
Timing Timer Relay Trigger Delay Circuit Delay Electrical Parts Infinite Loop - The built-in watchdog circuit and dedicated reset chip of the MCU work stably and reliably. 1 Relay module. The machine repeats the test circuit, for example, a test that is energized for 1 minute and then powered off for 1 minute.
SQUARE D A9.25 Thermal Unit,6.42 to 6.79A - SQUARE D A9.25. Thermal Unit,6.42 to 6.79A. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
SQUARE D A5.78 Thermal Unit,4.08 to 4.32A - SQUARE D A5.78. Thermal Unit,4.08 to 4.32A. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
SQUARE D A4.79 Thermal Unit,3.46 to 3.70A - SQUARE D A4.79. Thermal Unit,3.46 to 3.70A. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
5PCS DC 6-30V 1-Way Relay Module Digital Multifunctional Timer Control Switch - 5PCS DC 6-30V 1-Way Relay Module Digital Multifunctional Timer Control Switch for Arduino Description: Wide voltage power supply (6~30V) supports micro USB 5.0V power supplyo Interface clear and One-key emergency STOP function (STOP key), with reverse connection protection Increased sleep mode, enable after 5 minutes without any operation. Automatically turn off the display any button to wake up Different OP, CL and LOP parameters can be set. These parameters are independent of each other, respectivelyThe saved; All setting parameters will be saved automatically 0.1 SEC (minimum) ~999 min (maximum) continuously adjustable Package Included: 5PCS Relay Module.
5V Flip-Flop Latch Relay Module Bistable Self-locking Switch Trigger Board_c:kx - Press the trigger button, the relay is locked, press again, the relay off, you can also add the trigger switch, and the use of low-level trigger. Can also trigger an external trigger switch, the products have a connection with a good seat and lead, more convenient to use ;.
FRM01 DC 5/12/24V 1 Channel Multifunction Relay Module Loop Delay Timer Swi:kx - Load capacity: normally open port maximum load capacity: DC 0-30V/10A, AC 0-250V/10A;normally closed port maximum. DC :DC positive power(with 5V, 12V and 24V modules to choose from). NO:relay normally open port, relay pull in before as the vacant,after pull in with the COM1 short connection.
LED DC 5V~36V Dual MOS Control Cycle Trigger Timer Delay Relay Module Switch:kx - Output Capacity: DC 5V~36V, at room temperature, continuous current is 15A, power 400W. With enhanced heat dissipation, the current can be up to 30A. P-4: signal holding function. P1.3: Signal is trigger again reset, relay off, and stop the clocking;.
8 Channels Relay Module Remote Control Relay Device Ethernet To RS485 - With an RS485 port, it supports Ethernet to RS485 transparent transmission. The device has an RS485 interface. The label RESET position is the factory reset button. 8-way relay, 8-channel digital input with full-open and full-off input.
Multifunction Digital Time Infinite Delay Switch Timer Relay Module DC5V 12V :kx - P7(trigger cycle on-off): When power on, the relay disconnected, trigger the relay on, delay T1, and the relay off. P8(trigger cycle off-on): When power on, the relay disconnected, trigger the relay disconnected, delay T1, and the relay on.
12V 8Channel Relay Module with Optocoupler for Arduino UNO 2560 1280 ARM PIC AVR - 12V 8-Channel Relay interface board, and each one needs 50-60mA Driver Current. 1 x 12V 8-Channel Relay Module. Indication LED for Relay output status. Size: Approx. 13.80 5.50 1.70cm(L W H). Equiped with high-current relay, AC250V 10A; DC30V 10A.
LED DC 5V~36V Dual MOS Control Cycle Trigger Timer Delay Relay Module Switch :kx - Output Capacity: DC 5V~36V, at room temperature, continuous current is 15A, power 400W. With enhanced heat dissipation, the current can be up to 30A. P-4: signal holding function. P1.3: Signal is trigger again reset, relay off, and stop the clocking;.
Aluminum Heat Sink SSR Solid State Relay Small Heat Dissipation KTB JeJ:kx - Aluminum Heat Sink For Solid State Relay SSR Small Type Heat Dissipation. New Heat Sink for Solid State Relay SSR. Aluminium alloy. 1 Pcs x Aluminum Heat Sink. Color: As the picture shown. And due to the difference between different monitors, the picture may not reflect the actual color of the item.
8 Channel Relay Module Remote Control Relay Device Ethernet To RS485 - With an RS485 port, it supports Ethernet to RS485 transparent transmission. The device has an RS485 interface. The label RESET position is the factory reset button. 8-way relay, 8-channel digital input with full-open and full-off input.
MRD-060D2 Ultra Thin 6.2mm Solid State Relay Module Input 4-32VDC NO - Dc solid state relay output, no spark, wear-resistance, durable. This Ultra-thin port type relay is mainly suitable for pneumatic DC electromagnetic valve. 1 x Solid State Relay Module. Protection circuit: diode reverse connect protection.
DC 12V NE555 Timer Delay Relay Switch Adjustable Module Time Delay Relay Module - The main chip: NE555. A relay and indicator lights. Stream with relay protection. Waterproof Digital Stopwatch Chronograph with Wristband Alarm AM PM 24H Clock. with input power light. Due to the light and screen difference, the item's color may be slightly different from the pictures.
QTY 4 - Weidmuller 8533640000 Contactor w/ Weidmuller RSS113024 Relay 24V - QTY 4 - Weidmuller 8533640000 Contactor w/ Weidmuller RSS113024 Relay 24V. These were installed, but never used to my knowledge. With that being said, these are being sold as-is, untested, with no warranty. These are being sold OBO, please make me an offer! If you’ve read this far, I’ll accept an offer of $45 plus shipping
SQUARE D A25.2 Thermal Unit,15.10 to 16.00A - SQUARE D A25.2. Thermal Unit,15.10 to 16.00A. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
SQUARE D 8501NR45 Rlay Scket,Standrd,Square,14 Pin,2.65" L - Rlay Scket,Standrd,Square,14 Pin,2.65" L. SQUARE D 8501NR45. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
1x Adjustable Infinite Cycle Loop Delay Timer Time Relay Switch ON/OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
5PCS 1 CH 5V Relay Module Switch Relay Control Boards High level TTL for Arduino - 5PCS 1 CH 5V Relay Module Switch Board Relay Control Boards SRD-05VDC-SL-C High level TTL for Arduino PIC ARM Description: Brand new 5V relay module Microcontroller development board can be used as modules, can be used as appliance control 5V-12V control signal of the TTL Control DC or AC signals can control the 220V AC load. There is a normally open and one normally closed contact Power LED Controlled light, pull off, off off Increased transistor drive a relay coil, the control pin high impedance. Control pins have pull-down circuit, to prevent floating relay malfunction Package Included: 10 X 5V relay module.
Electric Tricycle Buzzer 2Pins Buzzer Relay Turn Signal Beep Flasher - Buzzer Beep Flasher Relay. LED turn signal flasher modification, use of advanced SMD chip technology, with automatic short circuit protection, automatic overload protection, reverse polarity protection automatically, allowing LED with steady work.
DC 12V Adjustable Infinite Cycle Delay Timer Time Relay Switch ON OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
DC 12V Cycle Timer Delay Switch Turn Off/On Time Relay Module Adjustable - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
1x Adjustable Infinite Cycle Loop Delay Timer Time Relay Switch ON/OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
Timing Timer Relay Trigger Delay Circuit Delay Electrical Parts Infinite Loop - The built-in watchdog circuit and dedicated reset chip of the MCU work stably and reliably. 1 Relay module. The machine repeats the test circuit, for example, a test that is energized for 1 minute and then powered off for 1 minute.
Dual MOS Tube Control Module Professional High Power Dual MOS Tube Control - Feature: 1. "Press and hold the SET key for 2 seconds and then release it" to enter the mode selection interface, and press the UP and DOWN keys briefly to select the mode to be set (P1.1~P‑4). Main interface: "000" (without decimal point) is displayed when the relay is not working, and decimal point is displayed when the relay is working, which is very clear.
DC 12V Digital Dual LED Cycle Timing Delay Timer Relay Module Clock Controller - WUZEI MTB Bike Crank GXP to BCD 104MM for XX1 X0 X9 Crank Convert ProtectorSpeed. You need wait 6s after setting data, the module will save the date after 6s. 3L/0.8Gal Electric Barrel Milking Machine Goat Milker Portable Vacuum Pump 2Teat.
Micro USB 5V LED Automation Delay Timer Control Switch Relay Module Display - Do not dismiss your dream. Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up;. 6: with optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
Digital LED Trigger Delay Cycle Timer Control Switch Relay Module Micro USB 5V - Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up;. 6: with optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
ONE 4 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
ONE 2 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PC NEW 2 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
ONE 4 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PCS NEW 4 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PCS NEW 4 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PCS NEW 4 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PCS NEW 4 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PCS NEW 2 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PCS NEW 2 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PCS NEW 2 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PCS NEW 2 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PCS NEW 2 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PCS NEW 2 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PC NEW 2 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
DC 12V Digital Dual LED Cycle Timing Delay Timer Relay Module Clock Controller - You need wait 6s after setting data, the module will save the date after 6s. 100/500/1000PCS 5mm Ultra Bright LED Red Light Bulb Lamp 20000mcd Super Bright. MTB Bike Computer Mount Flashlight Holder Bracket Fit Garmin Cateye Bryton Gopro.
Electric Tricycle Buzzer 2Pins Buzzer Relay Turn Signal Beep Flasher - Buzzer Beep Flasher Relay. LED turn signal flasher modification, use of advanced SMD chip technology, with automatic short circuit protection, automatic overload protection, reverse polarity protection automatically, allowing LED with steady work.
Siemens 3Tx7144-1E2 Socket - Relay Socket, Number of Pins - Relay 8, Electrical Connection - Relay Socket Screw Clamp, Status Indicator None, Color White. Governing Law; Limitations. Diversion contrary to U.S. law is prohibited.
Allen Bradley 700-HN127 Relay Socket SER A 10A 300V USA Seller - Allen Bradley 700-HN127 Relay Socket SER A 10A 300V USA SellerAd is for one of the items available. Buyer will receive item identical or similar to that pictured.Item does not come in original boxCondition is newShips with free USPS PriorityIncludes 60 day warrantyPlease feel free to ask any questions————————————————————————Shelf 2-B
1x Adjustable Infinite Cycle Loop Delay Timer Time Relay Switch ON/OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
2Pins Buzzer Relay Turn Signal Beep Flasher Electric Tricycle Buzzer - Buzzer Beep Flasher Relay. LED turn signal flasher modification, use of advanced SMD chip technology, with automatic short circuit protection, automatic overload protection, reverse polarity protection automatically, allowing LED with steady work.
LED Flash Relay Flash Relay Adjustable Speed Black / Orange Relay Accessories - Features of this flasher When installing, be sure to align the feet correctly, the function of the flasher cannot be realized if the feet are wrong. 1 LED flash relay (optional). - Use: It is the third gear frequency, turn it counterclockwise to speed up, and turn it clockwise to slow down.
3-Pin/LED Turn Signal Flasher Relay 12V 3-Pin 5.5*3*3cm Adjustable Speed - This flasher relay will solve LED related turn signal indicator issues such as super flickering, no flickering, or just replacing the faulty relay. - It eliminates the use of load resistors, directly replaces OEM 3-pin flasher relays, and works with LEDs or traditional bulbs at normal flash rates.
LED Flash Relay Flash Relay Adjustable Speed Black / Orange Relay Accessories - Features of this flasher When installing, be sure to align the feet correctly, the function of the flasher cannot be realized if the feet are wrong. 1 LED flash relay (optional). - Use: It is the third gear frequency, turn it counterclockwise to speed up, and turn it clockwise to slow down.
1PCS NEW 4 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
ONE 4 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PC NEW 4 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PC NEW 4 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
1PCS NEW 4 Channel Optocoupler Relay Module DC 5V/12V/24V - 2, Using SMD optocoupler isolation, driving ability, stable performance ; trigger current 5mA;. 1 x Relay Module with Optocoupler. 1, The module uses genuine quality relay, normally open interfaces Maximum load : AC 250V/10A, DC 30V/10A;.
Smart Remote Control Wireless WiFi Switch Relay Module 1/2/4CH DC7~32V/AC85~250V - Arduino Module. Remote on/off: remote on/off of 4 electronic devices from anywhere. Electronic Component. Wireless Standard:Wi-Fi 2.4GHz b/g/n. Supports remote turn on or off of connected appliances such as lights, kettles, rice cookers, electric curtains etc.
IO23C01 DC12V 30A Timer Delay Relay Module On/Off Self-lock Instantaneous Switch - Latching relay modes: CH1 interface to relay a high level pulse signal, relay, give a high pulse signal relay disconnected. high pulse signal, repeat the above functions;. Trigger relay modes: CH1 interface to a high signal relay, relay, low disappear, relay disconnected.
DC5V/6-24V 3-5A Flip-Flop Latch DPDT Relay Module Bistable Self-locking Switch - This is a bistable (self-locking) relay module,Trigger once, the relay pull (and holds);Trigger again, the relay releases (and holds). DPDT Relay outputs Load current: Maximum 5A(Motor <=3A). By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on.
DC 7-24V Dual Channel Relay Module Switch Input And Output RS485/TTL - RS485 level communication chip. RS485 communication using standard MODBUS RTU format. Dual ModbSU relay module is equipped with mature and stable 8-bit MCU and. Onboard mature and stable 8bit MCU and MAX485 level conversion chip.
DC 7-24V Relay Module RS485/TTL1 Input And Output With Anti-reverse Protection - RS485 level communication chip. RS485 communication using standard MODBUS RTU format. Single Modbus relay module is equipped with mature and stable 8-bit MCU and. Onboard mature and stable 8bit MCU and MAX485 level conversion chip.
ESP8266 Network Relay WIFI Module - This is an ESP8266 Network Relay WIFI Module, which based on the ESP8266 and a 10A relay. With this module, you can upload your firmware then can make perfect IoT projects you like. 220V 10A relay, one normally open, one normally closed.
DC12V 60V Electric Tricycle Buzzer Beep Flasher Relay Turn Signal 2Pins Buzzer - Buzzer Beep Flasher Relay. LED turn signal flasher modification, use of advanced SMD chip technology, with automatic short circuit protection, automatic overload protection, reverse polarity protection automatically, allowing LED with steady work.
Carte 'entraînement De Haut Niveau Module De Pilote De Haut Niveau De Relais - Liste des colis : 1 x module de pilote de haut niveau de relais. Le relais a une longue durée de vie et peut être fermé en continu 100 000 fois, ce qui est durable. Joue le rôle de réglage automatique, de protection de sécurité, de circuit de conversion, etc. dans le circuit.
5V Relay Module 4 Channel 30A Current Relay Module With Isolation Optocoupleur - The use of patch optocoupler isolation design makes the 4channel relay module powerful and more stable in performance. Load Current: 30A. Feature: 1. Each channel of the relay module is equipped with a relay LED indicator to show the switch status of the channels.
40A 220V Din Rail Adjust Über- und Unterspannungsschutz-Relaisschalter wieder an - Der automatische Überspannungs- und Unterspannungsschutz SVP-912M ist für einphasigen Wechselstrom mit 230 V, 50/60 Hz und einem Nennbetriebsstrom von 40 A geeignet. Wenn die Schaltungsspannung zu hoch ist, kann der Protektor außerdem die Stromversorgung automatisch einschalten und zum Normalzustand zurückkehren.
DC 24V 0-60min Infinite Cycle Delay Timer Timing Switch Relay Turn ON OFF - The module Power-on, When triggered the relay is switched on, delay T1,and the relay is disconnected, delay T2, the relay is switched on again. Such cycle. T1 and T2 are set by two adjustable resistors, respectively.
AC 220V 4 WAY WiFi Wireless Relay Switch Module + 433Mhz Remote Control - Mode of transport: Wifi. Wifi Work Frequency: 2.4G 802.11 b / g / n. With Signal Indicator Lamp Relay Operation Lamp. Power Power Consumption of Rest: 80mA; if all relays are up, max 380mA. Insulation Resistance: 100 M ohm.
02 015 Module De Relais Carte 'amplificateur De Signal Anti-interférence - Liste des colis : 1 x module de relais. Installation du relais : type plug and pull. Fonctionnalité : 1. La double sélection de puissance et la conception de l'optocoupleur sont adoptées pour améliorer la capacité anti-interférence et l'isolation.
4 Channel 5V Relay Shield Module Relay Control Board Relay Expansion Board - Relay: sky- 5V DC relay, model HJR-4102-L-5V, which Relay1 behalf of the 1st relay, the other and so on. 3 M3 screw positioning holes for easy installation. Titanium Alloy TC4 Handle Patch DIY Knife Handle For 58mm Victorinox Swiss Army.
Flip Flop Latch Relay Module Bistable Locking Switch Trigger Board Low level - Press the trigger button, the relay is locked, press again, the relay off, you can also add the trigger switch, and the use of low-level trigger. 1 Flip-Flop Latch Relay Module. Protein Leather Ear Pads Cushion for Bose QuietComfort QC15 QC25 QC35 Headset.
SeedStudio Channel Relay Shield V2.0 Module Board for Arduino #315 - Standardized shield form factor enables smoothly connection with the Arduino. The shield also has four dynamic indicators show the on/off state of each relay. Working status indicators for each relay.
Carte De Développement De Module De Relais WIFI à 8 Canaux Pour Le Contrôle - Fonctionnalité : 1. Avec un excellent processus de production et un savoir-faire exquis, le module n'est pas facile à souder. Le relais est fermé en continu 100 000 fois, avec une forte capacité de conduite et des performances stables.
Flip Flop Latch Relay Module Bistable Locking Switch Trigger Board Low level - Press the trigger button, the relay is locked, press again, the relay off, you can also add the trigger switch, and the use of low-level trigger. 10 pairs/ 20 pcs 3M 1100 Soft Foam Ear Plug Uncorded Earplugs 29 dB Orange Noise.
Prise En Charge De La Carte De Commande Du Module De Relais à 4 Canaux - L'indicateur de relais intégré est rouge et l'état du module de relais peut être vu en un coup d'œil. Fonctionnalité : 1. Modèle de relais : HJR-4102-L-5V. Votre reconnaissance nous encourage beaucoup et mieux vous servir.
ESP8266 WIFI Module De Relais 4 Canaux Commutateur Intelligent Sans Fil Pour - Fonctionnalité : 1. Le module de relais possède des performances stables pour répondre aux besoins de divers scénarios de travail. Avec un excellent processus de production et un savoir-faire exquis, le module n'est pas facile à souder.
SainSmart USB Eight Channel Relay Board for Automation - 12 V - Each such board requires one USB port. The more USB ports you have the more Relay boards you may connect. You may use it with our software( universal software for all our relay boards). The device must be supplied with 12 VDC or order to work.
Amf Potter & Brimfield #27E123 Relay Socket - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information WEAR FROM USAGE AND STORAGE.
Relay Module Switch Trigger Time Delay Circuit Timer Cycle Adjustable DC 12V - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
Delay Timer Relay DC12V Infinite Loop Loop Durable High Quality Practical - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. The relay is triggered, when T1 is delayed and the relay is off, the module will open. Repeat the test circuit, for example B. 1 minute, and then close the test loop for 1 minute.
RITTAL SZ 4315.520 Türpositionsschalter 7-5-1 #6214 - SZ 4315.520. VOR dem Kauf. mit einem Kurierdienst! Aus Betriebsauflösungen mit üblichen Gebrauch- und/oder Lagerspuren. Zypern (außer Nordteil). Zypern (Nordteil). In dringenden Fällen und wenn es technisch machbar ist.
OMRON PYF08A E 8 Pin Relay Socket 250V 7 AMP Misc Style Lot Of 6 - New OMRON PYF08A E 8 Pin Relay Socket 250V 7 AMP 08Y4C Lot Of 7These are used and a bit dusty, no signs of damage or corrosion. Acquired from a closed workshop. All had various relays (also for sale in my other auctions) attached. Please make sure these are the right part for your application. No returns, Sold as is. Will ship 48-72hrs after payment received.
Relay 32 Functions Reliable Delay Timer Control Switch For DC Motors - Feature: 1. CONVENIENT and PRACTICAL: The relay module can realize the fast and frequent switching on and off of the circuit at high frequency. Function: Pulse Trigger Cycle, Timing, Delay, Power Tube, mos Tube, Field Effect Tube, Switch, Relay Switch.
DC12V / AC110-220V 0-999 Hours LED Dual Display Cycle Timing Delay Relay Module - Colour: Black. Timing range: 0-999S/0-999M/0-999H. Pressing SET in the current mode switches P0, P1. P0-0 (T1 timing range is seconds). Set up as follows Get The Right At The Right Price!. We will be happy to resolve any issues you may have in a cordial and friendly manner.
1 Channel Infrared Remote Control Relay Learning Remote Control Switch Module 5V - The module adopts genuine high quality 10A relay, the maximum load of the interface: 250V/10A AC, 30V/10A DC. The jumper cap can switch the working mode of the relay. 3、Through the jumper cap you can switch the working mode of the relay (self-locking or pointing).
Molence DIN Rail Mount 4 Channels Relay AC/DC 24V Control 4 SPDT 10A Pluggabl... - Each relay circuit is independent and pluggable. Din rail mountable - for width 35 / 32 / 15mm rails. It is convenient and quick to install, firm and stable, and more convenient to disassemble. Built-in Omron relay G2R-1-E certified with UL, Switching current up to 10A at 250VAC or 30VDC.
DC 12V Cycle Timer Delay Switch Turn Off/On Time Relay Module Adjustable - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
1x Adjustable Infinite Cycle Loop Delay Timer Time Relay Switch ON/OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
LED Flash Relay Flash Relay Adjustable Speed Black / Orange Relay Accessories - Features of this flasher When installing, be sure to align the feet correctly, the function of the flasher cannot be realized if the feet are wrong. 1 LED flash relay (optional). - Use: It is the third gear frequency, turn it counterclockwise to speed up, and turn it clockwise to slow down.
Adjustable Delay Timer Relay Module ON OFF Module High Quality Practical - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. The relay is triggered, when T1 is delayed and the relay is off, the module will open. This module uses MCU as the main chip.
1x Adjustable Infinite Cycle Loop Delay Timer Time Relay Switch ON/OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
Flashers Beep Flasher Relay Turn Signal Electric Tricycle Buzzer 2Pins Buzzer - Buzzer Beep Flasher Relay. LED turn signal flasher modification, use of advanced SMD chip technology, with automatic short circuit protection, automatic overload protection, reverse polarity protection automatically, allowing LED with steady work.
HW-516 Timing Control Module DC 12V 24V Trigger Cycle Timer Switch Module - P-4: signal holding function. P1.3: Signal trigger again, relay off, stop the clock;. X decimal point in decade place, Timing range: 0.1 seconds to 99.9 seconds. X. X. decimal full brightness, Timing range: 1 minute to 999 minutes.
Relay 32 Functions Safe Reliable Delay Timer Control Switch For DC Motors - Feature: 1. CONVENIENT and PRACTICAL: The relay module can realize the fast and frequent switching on and off of the circuit at high frequency. Function: Pulse Trigger Cycle, Timing, Delay, Power Tube, mos Tube, Field Effect Tube, Switch, Relay Switch.
Wifi Relay Shield for WeMos D1 Mini ESP8266 Development Board - ESP8266 ESP-01S 5V Wifi Relay Module Remote Switch Phone APP Project Tool DIY. Model: D1 relay V2. for KAWASAKI. for YAMAHA. for Harley. Bicycle Parts & Accessories. is provided once the item is dispatched.
Module De Relais HCW-03 Module De Circuit Retardé DC 12V Double Module De - La machine répète le circuit de test, par exemple, mise sous tension pendant 1 minute puis mise hors tension pendant 1 minute. de bien vouloir nous isser une rétroaction positive et nous donner l'estimation détaillée de vendeur avec les «5 étoiles» dans zone très.
Timer Switch Timing Accessory Adapter Assembly Indoor/Outdoor Mechanical - Drive Mode: Quartz Motor. Motor: 110VAC 750W 220VAC 1500W. Due to the difference between different monitors, the picture may not reflect the actual color of the item. The product can provide accurate scale for clear readings.
5V 16 Channel Relay Module With Optocoupler Protection Low Level Trigger♡ - With excellent industry optocoupler isolation anti-interference performance and stability. Each common relay is independent and easy to use to access different signals, with port normally closed/open and an action indicator.
DC 12V Relay DIN Rail Mount 4‑channel 16A Power Relay Interface Module♡ - Rated load current: 16A. High quality PCB housing, DIN rail mountable. Application: PLC, DIN rail mount. Module install: U guide rail C45. LED indicator for each relay channel. 1 x Relay Module. Relay mounting: Pluggable.
1 Set Universal Ceiling Fan Remote Control Receiver For Ceiling Fan Lamp - 40 Amp Car Circuit Breaker Automatic Reset Circuit Breaker Fuse Holder. 5 Pcs Car Relay 40A Car Relay 12v Automotive Relay Anti- Device. 2pcs DC 12V 8 Pin Small Auxiliary Relay Kit Adjust Automatically With Base For.
1 Set Ceiling Fan Remote Control Universal Fan Lamp Remote Replacement - If yes, look no further! 3pcs Durable Relay Socket Base Holder Auto Mini Relay 5 Pin 12V 40A Relay. 3-gear wind speeds, choose as you like. 4PCS Refrigerator Starter Relay 4-pin Freezer Thermal Overload Protector.
Accessoires électroniques Interrupteur De Minuterie De Micro-ordinateur DC12V - Fonctionnalité : 1. Ce commutateur de minuterie pour micro-ordinateur est très facile à installer, ce qui le rend populaire parmi les travailleurs. 1 x minuterie de micro-ordinateur Commutateur. de bien vouloir nous isser une rétroaction positive et nous donner l'estimation détaillée de vendeur avec les «5 étoiles» dans zone très.
Timer Switch Timing Assembly Fitting Indoor/Outdoor Mechanical Accessory - Drive Mode: Quartz Motor. Motor: 110VAC 750W 220VAC 1500W. Due to the difference between different monitors, the picture may not reflect the actual color of the item. The product can provide accurate scale for clear readings.
Wifi Relay Shield for WeMos D1 Mini ESP8266 Development Board - Model: D1 relay V2. 2X Plastic Inflation Plugs/Shell Liner Block Fit All Cow Goat Sheep Milker. WUZEI MTB Bike Crank GXP to BCD 104MM for XX1 X0 X9 Crank Convert ProtectorSpeed. ☺Motorcycle Parts. is provided once the item is dispatched.
Relay Socket Omron Ptf08A-E Usa Seller - SOCKET OMRON PTF08A-E FITS LY2 RELAYS PTF08A-E RELAY SOCKET, DIN RAIL, SCREW, 8 PINS, 15 A, 110 VAC, LY SERIES USED, VERY GOOD CONDITION SEE PICTURES OF ACTUAL ITEM FOR MORE DETAILS.
11 Pin Relay Socket Dayton 6X156 Usa Seller - DAYTON RELAY SOCKET OCTAL 6X156 UNDECAL (11 PIN) BASE STYLE - RELAY SOCKET: OCTAL NUMBER OF PINS - RELAY: 11 CONTACT RATING - RELAY SOCKET: 15A - 300V AC USED GOOD SEE PICTURES OF ACTUAL ITEM FOR MORE DETAILS.
DC 12V Adjustable Infinite Cycle Delay Timer Time Relay Switch ON OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
5pcs new G4A-1A-PE DC12 OMRON relay - Other countries. It is very important, we need it. USA,Canada,Australia. You should receive item within 2-4 weeks.
Delay Timer Relay DC12V Module ON OFF Cycle ON OFF Module Durable Practical - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. The relay is triggered, when T1 is delayed and the relay is off, the module will open. This module uses MCU as the main chip.
1 Set Ceiling Fan Remote Control Universal Fan Lamp Remote Replacement - If yes, look no further! 3-gear wind speeds, choose as you like. 40 Amp Resettable Circuit Breaker Car Circuit Breaker Fuse Holder. 3 Pieces Car Relay 40A Car Relay 12v Automotive Relay Product. 4 PCS Start Relay Beverage Cooler Mini Abs Refrigerator Start Relay.
1 Set Ceiling Fan Remote Control Universal Fan Lamp Remote Replacement - If yes, look no further! 3-gear wind speeds, choose as you like. 4 PCS Starter Compressor Mini Beverage Fridge Start Relay Mini Fridge. | Health & Beauty |. Battery: 2 x AAA (not included). - Simple installation and easy operation.
1 Set Universal Ceiling Fan Remote Control Receiver For Ceiling Fan Lamp - 2pcs DC 12V 8 Pin Small Auxiliary Relay Kit Adjust Automatically With Base For. 2pcs Durable Auto Mini Relay 5 Pin 12V 30A Relay Auto Universal Relay for Car. 3pcs Durable Relay Socket Base Holder Auto Mini Relay 5 Pin 12V 40A Relay.
1 Set Ceiling Fan Remote Control Universal Fan Lamp Remote Replacement - If yes, look no further! 3 Count Car Relay 40A Car Relay 12v Automotive Relay Automatic. 3-gear wind speeds, choose as you like. | Health & Beauty |. Battery: 2 x AAA (not included). - Simple installation and easy operation.
1 Set Universal Ceiling Fan Remote Control Receiver For Ceiling Fan Lamp - 4 PCS Starter Start Relay Freezer Starter Insert Mini Fridge Drinks Launcher. - Sensitive button, convenient and fast operation, service life. | Health & Beauty |. Battery: 2 x AAA (not included). -Color:As Shown.
1 Set Ceiling Fan Remote Control Universal Fan Lamp Remote Replacement - If yes, look no further! 3-gear wind speeds, choose as you like. 2pcs DC 12V 8 Pin Small Auxiliary Relay Kit Adjust Automatically With Base For. 80 Amp In-Line Circuit Breaker Stereo-Audio Car RV 80A Fuse 12V/24V/32V.
Durable Timer Switch Timing Mini Replacement TB35-N 24-Hour AC100-240V - Due to the difference between different monitors, the picture may not reflect the actual color of the item. The product can provide accurate scale for clear readings. Design with clear cover, it is dust resistant.
1 Set Ceiling Fan Remote Control Universal Fan Lamp Remote Replacement - If yes, look no further! 3-gear wind speeds, choose as you like. 80 Amp In-Line Circuit Breaker Stereo-Audio Car RV 80A Fuse 12V/24V/32V. 2pcs DC 12V 8 Pin Small Auxiliary Relay Kit Adjust Automatically With Base For.
1 Set Universal Ceiling Fan Remote Control Receiver For Ceiling Fan Lamp - 40 Amp Resettable Circuit Breaker Automatic Reset Circuit Breaker Fuse Holder. 2pcs DC 12V 8 Pin Small Auxiliary Relay Kit Adjust Automatically With Base For. 5 Pcs Car Relay Auto Relay Automotive Relay Anti- Device.
1 Set Ceiling Fan Remote Control Universal Fan Lamp Remote Replacement - If yes, look no further! Durable Auto Mini Relay 5 Pin 12V 30A Relay Auto Universal Relay for Car. 3-gear wind speeds, choose as you like. | Health & Beauty |. Battery: 2 x AAA (not included). - Simple installation and easy operation.
1 Set Universal Ceiling Fan Remote Control Receiver For Ceiling Fan Lamp - 40 Amp Resettable Circuit Breaker Refit Automatic Reset Circuit Breaker. Durable Auto Mini Relay 5 Pin 12V 30A Relay Auto Universal Relay for Car. 4 PCS Refrigerator Start Relay Protector Abs Refrigerator Start Relay.
1 Set Universal Ceiling Fan Remote Control Receiver For Ceiling Fan Lamp - 40 Amp Car Circuit Breaker Automatic Reset Circuit Breaker Fuse Holder. Durable Auto Mini Relay 5 Pin 12V 30A Relay Auto Universal Relay for Car. 2pcs DC 12V 8 Pin Small Auxiliary Relay Kit Adjust Automatically With Base For.
LED Flash Relay Flash Relay 1pcs Electric Vehicle Flasher Led Turn Signal - Features of this flasher When installing, be sure to align the feet correctly, the function of the flasher cannot be realized if the feet are wrong. 1 LED flash relay (optional). - Features: The flickering frequency of the turn signal can be adjusted, and the advanced SMD technology is adopted, with automatic short-circuit protection, automatic overload protection, and reverse-connection automatic protection, which can make the bulb work more stably.
Relay Module 2 Channel Button Self-Locking Interlock High Low Level Trigger - There is a signal light for each channel to clearly know which switch is working. Particularly suitable for the electronic circuit design of students in colleges and universities, can be connected with a single chip, or add a first level amplifier to drive a relay or a small DC motor.
5pcs new Xinda Relay 24VDC 946H-1C-24D - Other countries. It is very important, we need it. USA,Canada,Australia. You should receive item within 2-4 weeks.
10Pcs 5V Control Module 3 Gear Dimming Stepless Adjustment Controller Board BT0 - Feature: 1. Extensive Using: Can be used for electric heating clothing, desk lamp, desktop small fan, heating film, LED light strip, etc. Easy to Install: Designed to have a light weight and a compact size as well, the convenient installation can be quickly finished.
10Pcs 5V Control Module 3 Gear Dimming Stepless Adjustment Controller Board ECA - Feature: 1. Extensive Using: Can be used for electric heating clothing, desk lamp, desktop small fan, heating film, LED light strip, etc. Easy to Install: Designed to have a light weight and a compact size as well, the convenient installation can be quickly finished.
10Pcs 5V Control Module 3 Gear Dimming Stepless Adjustment Controller Board ADS - Feature: 1. Extensive Using: Can be used for electric heating clothing, desk lamp, desktop small fan, heating film, LED light strip, etc. Easy to Install: Designed to have a light weight and a compact size as well, the convenient installation can be quickly finished.
12V 4 Channel Relay Module With Optocoupler High and Low Level Trigger - Using SMD OPTOCOUPLER isolation, driving ability, stable performance ; trigger current 5mA;. Com with low short circuit, triggering the corresponding relay is low, while the high end of the short com high trigger.
2pcs new Buick Relay GM 13500114 - Other countries. It is very important, we need it. USA,Canada,Australia. You should receive item within 2-4 weeks.
2pc new Relay G8VA-1A4T-R 12VDC V11 - Other countries. It is very important, we need it. USA,Canada,Australia. You should receive item within 2-4 weeks.
5pc new VE-R02 2Ca3 AC220V Relay Pin 8 - Other countries. It is very important, we need it. USA,Canada,Australia. You should receive item within 2-4 weeks.
12V Rain Water Raindrops Detection Sensor Module Panel Relay Control Module N US - Load capacity of relay: 250V 10A (AC) 30V 10A (DC). 1 x Relay module. 1 x Raindrop sensor panel. The sensor is made of quality FR-04double-sided material, with a super large area of 5.0 4.0CM, and the is treated with nickel plating, which has superior performance in anti-oxidation, electrical conductivity and service life.
2pcs new TAIKO Relay HTB1-160ML-12VDC - Other countries. It is very important, we need it. USA,Canada,Australia. You should receive item within 2-4 weeks.
DC 24V 1-Channel Relay Module with Optocoupler H/L Level Trigger - Using SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA;. the module can be high or low by a jumper setting trigger;. the power indicator (green), the relay status indicator (red).
8 Channel Relay Module Controller Extension Board GPIO For 4B/3B US - Based on for 40pin GPIO interface, suitable for series motherboards/Jetson. Feature: 1. Equipped with relay indicator light, easy to check the working status of the relay. This relay module using standard guide rail designs, easy to install and use.
Durable Timer Switch Timing Mini Replacement TB35-N 24-Hour AC100-240V - Due to the difference between different monitors, the picture may not reflect the actual color of the item. The product can provide accurate scale for clear readings. Design with clear cover, it is dust resistant.
DC 12V Cycle Timer Delay Switch Turn Off/On Time Relay Module Adjustable - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
DC 12V Cycle Timer Delay Switch Turn On/Off Time Relay Module Adjustable,1Pcs - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
1x Adjustable Infinite Cycle Loop Delay Timer Time Relay Switch ON/OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
Timer Module Trigger Cycle Dual MOS Delay Control Board for w/ Digital Tube Disp - No interruption in the on-off process, no electric spark, no electromagnetic interference;. 2:trigger signal source: high level trigger (for DC 3.0V-24VThe signal ground and the system ground do not jointly improve the anti-interference ability of the system (also can be short-circuited by itself). ).
CJMCU-1334 AUX Stereo Digital DAC Board Module Voice Module - CJMCU-1334 AUX Stereo Digital Audio DAC Decoder Board Module Voice Module. Its I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. Material: Circuit Board, Electronic Component.
Lot of 5 - NEW Nais HG4-SF Terminal Relay Socket 15A 250VAC - Note: due to shelf wear, glue holding on bottom plate has dried, therefore bottom plates are loose (see pics). Manufacturer: NAIS. It's often to late to solve them if you wait. Part number: HG4-SF. - May exhibit signs of "shelfwear".
1x Adjustable Infinite Cycle Loop Delay Timer Time Relay Switch ON/OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
3.3V 5V 12V 24V 1 Channel Relay Module High and low Level Trigger Relay Bot1 - When com is shorted to low, the corresponding relay is a low level trigger. When com is shorted to high, it is a high level trigger. Using double optocoupler isolation, strong drive capability, stable performance; trigger current 5mA;.
LED Flash Relay Flash Relay Black / Orange Electric Vehicle Led Turn Signal - Features of this flasher When installing, be sure to align the feet correctly, the function of the flasher cannot be realized if the feet are wrong. 1 LED flash relay (optional). - Features: The flickering frequency of the turn signal can be adjusted, and the advanced SMD technology is adopted, with automatic short-circuit protection, automatic overload protection, and reverse-connection automatic protection, which can make the bulb work more stably.
16 Channel 9-36V USB Controlled SPDT Relay Module Opto-isolated Board SRD-5VDC - 1x 16-Channel USB Relay Module. LED for each relay output. Maximum load: 10A/250V. LED Light Board 7 Coloured 16V strip Multi-axis Traverser Aerial Light. Bluetooth 5.0 Transmitter Receiver Wireless 3.5mm Adapter AUX NFC to 2 RCA Audio.
PILZ PNOZZ24VAC/DC 675500 24VAC 5A USA Seller - PILZ PNOZZ24VAC/DC 675500 24VAC 5A USA SellerCondition is newShips with free USPS PriorityIncludes 60 day warrantyPlease feel free to ask any questions————————————————————————Shelf 7-D
Wheel Accessories Parts Bulge Acorn Set of 24 Aftermarket Lug Nuts M14 X 1.50 Th - Thread Size M14 x 1.5. Inside Thread Size M14 x 1 5. Wheel Accessories Parts lug nuts are a two piece design. Fits Chevy, Ford, GMC. For Trucks with wheel studs requiring a 14mm x 1.50 or 14x1.50 or M14x1.50 thread and wheels that take a conical/ cone seat.
2pcs New For ABB Relay Socket CR-M2SFB - No one is EVER ignored! We are in endeavor to provide you best service and keep you a happy buying experience from us.
Relay Starter For Isuzu 4HK1 4JJ1 4BG1 4BD1 4JB1 4GJ1 4LE1 6RB1 6WG1 Engine - Isuzu 4HK1 4JJ1 4BG1 4BD1 4JB1 4GJ1 4LE1 6RB1 6WG1 Engine. And we wouldn't use your phone number for other purpose. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and friendly manner.
Flip Flop Latch Relay Module Bistable Locking Switch Trigger Board Low level - Press the trigger button, the relay is locked, press again, the relay off, you can also add the trigger switch, and the use of low-level trigger. 1 Flip-Flop Latch Relay Module. Guitar Capo Trigger Release Guitar Alloy Capo Electric Acoustic Alloy Clamp.
LED Display Adjustable Timer Relay Automation Control Switch Module - NO: the relay normally opens the interface, and the relay is suspended before absorption, and is connected with COM short after absorption. NC: the relay normally closes the interface, and the relay is short connected with COM before absorbing and suspended after absorbing.
LED Display Adjustable Timer Relay Automation Control Switch Module - NO: the relay normally opens the interface, and the relay is suspended before absorption, and is connected with COM short after absorption. NC: the relay normally closes the interface, and the relay is short connected with COM before absorbing and suspended after absorbing.
H3Y-4 Time Relay Pointer Control Delay Timer Control Switch 14-Pin 24VDC - Working Mode: Electricity Delay. Protective Characteristics: Seal Type. High delay accuracy and strong anti-interference. Stable performance, long service life. If you do not receive our reply within 48 hours, pls.
5V Two 2 Channel Relay Module With optocoupler For PIC AVR DSP ARM Arduino - (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). (8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). This is a 2 Channel 5V Relay interface board. 1.5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current.
DC 12V 4-Channel Relay Module Optocoupler For Arduino PIC ARM AVR DSP HD23L - This is a 12V 4-Channel Relay interface board. 12V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current. Indication LED’s for Relay output status. Equiped with high-current relay, AC250V 10A ; DC30V 10A.
5V 2 Channel SSR G3MB-202P Solid State Relay Module with Resistive Fuse - 5V Omron solid state relay 240V 2A, output with resistive fuse 240V 2A. 1PCS 5V 2 CH OMRON SSR G3MB-202P Solid Relay Module with Resistive Fuse For Arduino M. Input Power: 5V DC (160mA). CH: relay module signal to trigger the end (high level trigger effective).
DC 5V/12V Multifunction Self-lock Relay PLC Cycle Timer Module Delay Time Switch - Do not dismiss your dream. DC 5V LED lighting. 5V DC Motor. NO: normal open (before relay closes, this pin is not connected. after relay closes, the pin short-connects with COM). NC: Normal closed (before relay closes, this pin short-connect with COM. ).
DC 12V Multifunction PLC Self-lock Delay Relay Cycle Timer Module Switch Control - NO: normal open (before relay closes, this pin is not connected. after relay closes, the pin short-connects with COM). NC: Normal closed (before relay closes, this pin short-connect with COM. after relay closes, the pin is not connected ).
5V Solar Energy Panel Tracking Sensor Module Automatic Circuit Board Single Axis - The power should be stabilivolt 5-5.5V, and it cannot connect the solar board. when the motor connects the board, there is no difference of positive and negative. When testing, if the motor rotates toward the opposite direction of the light source, then change the motor wire position.
Trigger Cycle Timer Delay Switch Circuit Board MOS Tube Control Module 12V 24V - ESP8266 ESP-01S 5V Wifi Relay Module Remote Switch Phone APP Project Tool DIY gd. To achieve fast turn-on and off the circuit, an unlimited number of switching;. Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up;.
5V One 1 Channel Relay Module ForPIC AVR DSP ARM - 1x 5V 1--Channel Relay Module for Arduino PIC ARM DSP AVR Electronic. have relay status indicator led. the 8550 transistor drive, drive ability;. hope you could understand.
1x Adjustable Infinite Cycle Loop Delay Timer Time Relay Switch ON/OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
Eaton NSB D2PAP Relay Accessories 10A 300V 15 Pin - MPN (Manufacturer Part Number): D2PAP. Product Condition: NSB. OEM ,NSB, NNB, NWD, andREF. We will respond to you within 24 hours and do our best to help you out! Product Width: 2.00 In. "Refurbished product, fully functional and repaired to OEM or better standards".
IO25A01 5V Flip-Flop for Relay Module Bistable Self-locking Switch Low Pul - This is a bistable (self-locking) relay module,Trigger once, the relay pull (and holds);Trigger again, the relay releases (and holds). USE : By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on.
Time Relay Timer Delay Adjustable Easy Installation For DIY - Feature: 1. ADJUSTABLE DELAY RANGE: Has 4 delay ranges to choose from, 0.05S to 5S, 5S to 50S, 50S to 5M and 5M to 30M. SECURE SHELL: Transparent and dustproof, the sturdy and durable shell is resistant to high temperature and impact.
Zigbee On/Off Controller for APP Remote Control for Home Modu - Zigbee On/Off Controller for Smart Switch APP Remote Control for Smart Home Modubrand new and high qualityFeatures:for Echo plus.for Echo show (2nd).for Smart things hub.Wink hub.Specification:Zigbee: IEEE 802.15.4In/Out: AC 85-265V 50/60HzMaxload: 250V/10Afor Shell material: ABSDimensions: 92.8x44.2x23.6mm/3.65x1.74x9.29inchColor: WhiteQuantity: 1 PcNote: 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!Package includes:1 x Zigbee On/Off Controller
DC 5V 12V 24V 0-24h Adjustable Cycle Timer Delay Relay Module On/Off Switch New - Repeat test circuit, such as power on for 1 minute and then power off for 1 minute so the cycle of testing. Cycle mode: 1. Adjustable to: 0 to 24 hours adjustable. Various temperatures and humidity under the delay error of not more than 2%.
Adjustable 0-24h Cycle Timer Delay Relay Module On/Off Switch DC 5V 12V 24V New - Repeat test circuit, such as power on for 1 minute and then power off for 1 minute so the cycle of testing. Cycle mode: 1. Adjustable to: 0 to 24 hours adjustable. Various temperatures and humidity under the delay error of not more than 2%.
Adjustable 0-24h Cycle Timer Delay Relay Module On/Off Switch DC 5V 12V 24V New - Repeat test circuit, such as power on for 1 minute and then power off for 1 minute so the cycle of testing. Cycle mode: 1. Adjustable to: 0 to 24 hours adjustable. Various temperatures and humidity under the delay error of not more than 2%.
DC 5V 12V 24V 0-24h Adjustable Cycle Timer Delay Relay Module On/Off Switch JK11 - Repeat test circuit, such as power on for 1 minute and then power off for 1 minute so the cycle of testing. Arduino Module. Cycle mode: 1. Adjustable to: 0 to 24 hours adjustable. Various temperatures and humidity under the delay error of not more than 2%.
12V LED Automation Delay Timer Control Switch Relay Module with case - Relay Specifications:AC 220V 10A or DC 30V 10A. Short press K1. seconds after,there lay open Y seconds,then close.Users can set the relay. Working mode selection:After power on,long press K12 seconds later into the select function mode,P1-1~P1-4forchoose.
DC 5V 12V 24V 0-24h Adjustable Cycle Timer Delay Relay Module On/Off Switch - Repeat test circuit, such as power on for 1 minute and then power off for 1 minute so the cycle of testing. Cycle mode: 1. Adjustable to: 0 to 24 hours adjustable. Various temperatures and humidity under the delay error of not more than 2%.
DC 5V 12V 24V 0-24h Adjustable Cycle Timer Delay Relay Module On/Off Switch - Repeat test circuit, such as power on for 1 minute and then power off for 1 minute so the cycle of testing. Cycle mode: 1. Adjustable to: 0 to 24 hours adjustable. Various temperatures and humidity under the delay error of not more than 2%.
Adjustable 0-24h Cycle Timer Delay Relay Module On/Off Switch DC 5V 12V 24V - Repeat test circuit, such as power on for 1 minute and then power off for 1 minute so the cycle of testing. Cycle mode: 1. Adjustable to: 0 to 24 hours adjustable. Various temperatures and humidity under the delay error of not more than 2%.
1Pc New Cr-Mx024Dc2L Abb Relay Module - No one is EVER ignored! We are in endeavor to provide you best service and keep you a happy buying experience from us.
Time Relay Multifunctional High Accuracy 8 Pin Timer 1.2s to 300h - Insulation Resistance: 100M. 1、The product has high delay accuracy which can be ±0.3% FS or less. Protective Construction: IEC: IP40 (Panel Surface). Power Consumption: 1.4W. 5、Available in two styles for choice: 220VAC, 24VDC/AC.
Time Relay Multifunctional High Accuracy 8 Pin Timer 1.2s to 300h - Insulation Resistance: 100M. 1、The product has high delay accuracy which can be ±0.3% FS or less. Protective Construction: IEC: IP40 (Panel Surface). Power Consumption: 1.4W. 5、Available in two styles for choice: 220VAC, 24VDC/AC.
Time Relay Multifunctional High Accuracy 8 Pin Timer 1.2s to 300h - Insulation Resistance: 100M. 1、The product has high delay accuracy which can be ±0.3% FS or less. Protective Construction: IEC: IP40 (Panel Surface). Power Consumption: 1.4W. 5、Available in two styles for choice: 220VAC, 24VDC/AC.
Time Relay Multifunctional High Accuracy 8 Pin Timer 1.2s to 300h - Insulation Resistance: 100M. 1、The product has high delay accuracy which can be ±0.3% FS or less. Protective Construction: IEC: IP40 (Panel Surface). Power Consumption: 1.4W. 5、Available in two styles for choice: 220VAC, 24VDC/AC.
Time Relay Multifunctional High Accuracy 8 Pin Timer 1.2s to 300h - Insulation Resistance: 100M. 1、The product has high delay accuracy which can be ±0.3% FS or less. Protective Construction: IEC: IP40 (Panel Surface). Power Consumption: 1.4W. 5、Available in two styles for choice: 220VAC, 24VDC/AC.
Time Relay Multifunctional High Accuracy 8 Pin Timer 1.2s to 300h - Insulation Resistance: 100M. 1、The product has high delay accuracy which can be ±0.3% FS or less. Protective Construction: IEC: IP40 (Panel Surface). Power Consumption: 1.4W. 5、Available in two styles for choice: 220VAC, 24VDC/AC.
1x Adjustable Infinite Cycle Loop Delay Timer Time Relay Switch ON/OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
CHDE Module 'isolateur Optocoupleur à 8 Canaux Conversion De Signal Stable - Fonctionnalité : 1. La connexion du module a une entrée de signal d'anode commune, une entrée de signal de cathode commune et une entrée de signal différentiel. Analyse du modèle : DST (convertisseur de signal numérique)‑1R (transmission unidirectionnelle) 8P (8 canaux)‑N (sortie NPN).
Adjustable Cycle Timer Delay On/Off Switch Relay Module DC12V,0-120min - Type: DC5V,0-30min/DC5V,0-24hr/DC12V,0-120min/DC12V, 0-24hr/DC24V,0-15min/DC24V,0-30min (Optional) Quiescent Current: <10mA. S u pport 2 modes, mon mode(once) and cycle mode, and you can simply switch mode by adjusting the jumper.
Adjustable Infinite Cycle Timer Delay On/Off Switch Relay Module DC12V,0-15min - Take a 5V 15min module as example. The module Power-on, When triggered the relay is switched on, delay T1,and the relay is disconnected, delay T2, the relay is switched on again. Such cycle. T1 and T2 are set by two adjustable resistors, respectively.
DC 5V--36V Trigger Cycle Delay Timer Switch Turn On/Off Relay Module LED Display - Output Capacity: DC 5V~36V, at room temperature, continuous current is 15A, power 400W. With enhanced heat dissipation, the current can be up to 30A. P-4: signal holding function. Automatically enter sleep mode and shut off display if no operation in 5 minutes, and will be wake up by pressing any button.
One Way High/Low Level Trigger Optocoupler Isolation Relay Module 30A YYG-2 DC5V - Made of the high quality miniature optocoupler, anti-interference ability, stable performance. Optional Style: DC5V, DC12V, DC24V. High/low level trigger can be switched. 1 One Way Relay Module. If you do not receive our reply within 48 hours, pls.
12V 24V Trigger Cycle Timer Delay Switch Circuit Board MOS Tube Control Module - Beauty Makeup Sponge Blender Flawless Latex Foundation Puff Pink+Black fl. Makeup Sponge Blender Blending Powder Smooth Puff Flawless Beauty Foundation USA. 2PC/5PC Beauty Makeup Sponge Blending Flawless Latex Foundation Puff Pink&Black.
Trigger Cycle Timer Delay Switch 12V 24V Circuit Board MOS Tube Control Module - ESP8266 ESP-01S 5V Wifi Relay Module Remote Switch Phone APP Project Tool DIY. To achieve fast turn-on and off the circuit, an unlimited number of switching;. Bicycle Part & Accessary. P1.3: Signal trigger again, relay off, stop the clock;.
P&B 27E893 Base W/KUP-14A45-120 Relay USA Seller - P&B 27E893 Base W/KUP-14A45-120 Relay USACondition is NewShips with Free USPS Priority MailIncludes 60 Day WarrantyPlease Feel Free to Ask Questions————————————————————————Shelf 7-D2/23
Time Relay Multifunctional High Accuracy 8 Pin Timer 1.2s to 300h - Insulation Resistance: 100M. 1、The product has high delay accuracy which can be ±0.3% FS or less. Protective Construction: IEC: IP40 (Panel Surface). Power Consumption: 1.4W. 5、Available in two styles for choice: 220VAC, 24VDC/AC.
Time Relay Multifunctional High Accuracy 8 Pin Timer 1.2s to 300h - Insulation Resistance: 100M. 1、The product has high delay accuracy which can be ±0.3% FS or less. Protective Construction: IEC: IP40 (Panel Surface). Power Consumption: 1.4W. 5、Available in two styles for choice: 220VAC, 24VDC/AC.
Time Relay Multifunctional High Accuracy 8 Pin Timer 1.2s to 300h - Insulation Resistance: 100M. 1、The product has high delay accuracy which can be ±0.3% FS or less. Protective Construction: IEC: IP40 (Panel Surface). Power Consumption: 1.4W. 5、Available in two styles for choice: 220VAC, 24VDC/AC.
6 Gang Switch Panel BC60, Universal Circuit Control Relay System Box with Automa - Item model number BC60-Upgraded 6 gang switch panel. AUTOMATIC DIMMABLE SYSTEM: Upgraded 6 gang switch panel have automatic dimmable feature. Two kinds of mounting ways for you to choose, you can install it with our mounting bracket or double-sided adhesive tape in any where, no need to cut a big hole on your vehicle!
(24V)Relay Module Board PCB RS485 Relay Module With DIN Rail For Electronics - Item Type: RS485 Relay Module. Installation: DIN35 and C45 rail standby current(all relays off) 14MA, 1 relay on 40MA, 2 relays on 68MA, 3 relays on 96MA, 4 relays on 122MA, 5 relays on 149MA, 6 relays on 177MA, 7 relays open 201MA, 8 relays open 225MA.
1x Adjustable Infinite Cycle Loop Delay Timer Time Relay Switch ON/OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
700-HN121Allen Bradley Relay Socket - Allen Bradley 700-HN121 Relay Socket 700HN121. We are NOT Authorized Distributor of this item. SKU REL-0656-U2. Condition USED. MPN 700-HN121.
700-HN122 Allen Bradley Relay Socket - Allen Bradley 700-HN122 Relay Socket 700HN122. We are NOT Authorized Distributor of this item. SKU REL-0656-U1. Condition USED. MPN 700-HN122.
5V Four 4 Channel Relay Module With optocoupler For PIC AVR DSP ARM 8051 - This is a 5V 4-Channel Relay interface board. 5V Relay Module 4-Channel. 5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current. Indication LED’s for Relay output status. Equiped with high-current relay, AC250V 10A ; DC30V 10A.
NE555 Delay Module shield Timer Switch DC 12V Adjustable 0 to 10 Second - Module based on: NE555 chip. Main Chip (NE555) Characteristics This is a 12V Conduction delay relay module. Delay modue:delay connect module. 10A, DC 0~30V / max. - The output can be connected to AC 250V 10A DC 30V 10A.
Real-time Relay Module Timing Switch Control Synchronization Delay Timer - BLL0: Ring disable. Relay enable mode After the relay is disabled, the product can be used as an alarm clock. ON: enable relay on;. OFF: Do not turn on the relay, it is always off;. C-P sleep mode: within five minutes, without any operation, the digital tube automatically shut down the display, the program normal operation;.
Timer Switch Adjustable Disconnect Module for Delay Relay Module for 12V - With delay pull-in, delay disconnection, self-locking and triggered delay functions. Load capacity: maximum load capacity of relay normally open port: for DC 0-30V/10A, AC 0-250V/10A, relay normally closed port maximum load capacity: for DC 0-28V/10A, AC 0-125V/10A.
MRD-060D10 PLC Relay Power Amplifier Board DC Solid State Relay Module - 1 x PLC Interface Relay. Relay type:solid state relay. Dc solid state relay output, no spark, wear-resistance, durable. Connection: screw connection. Input: 4-32V DC. Protection circuit: diode reverse polarity protection.
3.3V 1-Channel Relay Driver Module Photoelectric Isolation Input NPN/PNP - Input port signal compatible with NPN and PNP,PLC devices. Signal Input:1+ is for signal input positive;signal input negative. Signal Output:01 is for signal output (drain output). Module Specification:72 19 18mm.
Terminal Block 3-Wire 16-Channel Board KP-16L-Gther-C 0.5A For 20-26AWG - Feature: 1. The block has compact size and design, which can reduce installation space, simple to operate. 3.81mm / 0.2in. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls.
Smart Home Hub Couverture Multidirectionnelle à Télécommande Intelligente - 1 x Smart Remote Contrôle. Votre reconnaissance nous encourage beaucoup et mieux vous servir. de bien vouloir nous isser une rétroaction positive et nous donner l'estimation détaillée de vendeur avec les «5 étoiles» dans zone très.
6 Gang Switch Panel Universal Circuit Control Relay System with Fuse Wiring Harn - Size 6 Gang Switch. Can be powered all types of 12V DC accessories. No needs to buy other parts. EASY INSTALLATION:The Plug-N-Play wiring harness with extension cable and the 2 mounting options of the switch pod makes installation much easier.
Infinite Cycle Timer Delay On/Off Switch Relay Module DC12V,0-15min - Take a 5V 15min module as example. The module Power-on, When triggered the relay is switched on, delay T1,and the relay is disconnected, delay T2, the relay is switched on again. Such cycle. T1 and T2 are set by two adjustable resistors, respectively.
12V LED Home Automation Delay Timer Control Switch Relay Module Digita Display - Do not dismiss your dream. Relay Specifications:AC 220V 10A or DC 30V 10A. Short press K1. seconds after,there lay open Y seconds,then close.Users can set the relay. The use of opto isolated input and output,enhanced anti-jamming capabilit.
Trigger Cycle Timer Delay Switch Circuit Board MOS Tube Control Module 24V 12V - Beekeeping Honey Entrance Feeder Hive Tool Beekeeper Bee Keeping Equip Kit 10PCS. To achieve fast turn-on and off the circuit, an unlimited number of switching;. 3: Output capacity: DC 5V - 36V, at room temperature, continuous current 15A, power 400W!
DC 12V Relay DIN Rail Mount 4‑channel 16A Power Relay Interface Module - Rated load current: 16A. High quality PCB housing, DIN rail mountable. Application: PLC, DIN rail mount. Module install: U guide rail C45. LED indicator for each relay channel. 1 x Relay Module. Relay mounting: Pluggable.
Carte 'isolation 'optocoupleur à 4 Canaux Module 'adaptateur De - Fonctionnalité : 1. Le chapeau de cavalier du module adaptateur de contrôle de tension peut réaliser le potentiel élevé ou abaisser la sortie du port de sortie. de bien vouloir nous isser une rétroaction positive et nous donner l'estimation détaillée de vendeur avec les «5 étoiles» dans zone très.
Allen Bradley 700-Hn128 Series B, Realy Socket #307521 - REALY SOCKET. MANUFACTURED BY: ALLEN BRADLEY. ALLEN BRADLEY 700-HN128 SERIES B. MANUFACTURER PART NUMBER: 700-HN128 -. Warehouse Pickup – We are able to accommodate pickup at our warehouse.
Twin Timer Relay ATDV YB On Off Control AC110V/220V 50/60Hz - Power Consumption: About 2VA. 6、Durable shell is simple to remove and easy to maintain. Service Life Use Ambient Temperature: -10 ~ +50℃. Use Ambient Humidity: Maximum, 85%RH.
11Pin 5A AC220V Mini Electromag Relay Power Interm - Rated Current: 5A. 1 Electromagnetic Relay. Mode of Operation: DC. Status Indication: Red Indicator. Electric Shock Material: Alloy. Model: BEMM3C.
ATDV YB Twin Timer Relay 110v/220v Knob Control On/Off - Power Consumption: About 2VA. 6、Durable shell is simple to remove and easy to maintain. Service Life Use Ambient Temperature: -10 ~ +50℃. Use Ambient Humidity: Maximum, 85%RH.
DC 12V Adjustable Infinite Cycle Delay Timer Time Relay Switch ON OFF Module - The relay opens again. Such a cycle. T1 and T2 are respectively set by two adjustable resistors. MCU watchdog circuit and special reset chip. The relay is triggered, when T1 is delayed and the relay is off, the module will open.
Time Control Twin Relay ATDV YB AC110v/220V - Power Consumption: About 2VA. Service Life 6、Durable shell is simple to remove and easy to maintain. Use Ambient Temperature: -10 ~ +50℃.
DC 12V RS485 Modbus RTU Relay Module UART Serial Port Switch PLC Digital Output - DC 12V RS485 Modbus RTU Relay Module UART Serial Port Switch PLC Digital Output Expansion Board Support 03 06 16 Function Code. MODBUS RTU command, Support 03 06 16 function code. Under the MODBUS command mode, it can support up to 64 devices in parallel.
2-Channel 12V Relay Module Optocoupler High and Low Level Trigger - Module can be set high level or low level trigger by jumper wire;. Trigger current 5mA;. Power indicator light (green), relay status indicator light (red);. High or low level trigger option Normally closed pin (NC1) : channel 1 relay normally closed pin.
1pcs 5V 1 Channel Solid-State Relay module Trigger original - CH: relay module signal to trigger the end (high level trigger effective). 5V solid state relay 240V 2A, output with resistive fuse 240V 2A. Input Power: 5V DC (160mA). (0-2.5V state low relay OFF). (3-5V state high relay ON).
ESP8266 ESP-01S 5V WiFi Relay Module Things Remote Control Switch for Phoneee - Communication: WIFI (ESP8266 module). This WIFI relay based on AI- ESP-01S WIFI module. Load: 10A/250VAC 10A/30VDC, the relay pull 100,000. Note: Light and different displays may cause the color of the item in the a little different from the real thing.
1/2PCS Relay HF2160-1A-12DE 30A 240V AC T93 SLI 4-pin Normally Open Parts ELI - Laptop Accessories include laptop AC adapter, portable laptop table, laptop drives and dvd burners. Fashion Electronics such as car mp3 player, gaming mouse, baby monitors, ebook readers etc. The RMA number must not be written on the manufacturer's product box.
5V/12V/24V Relay Board High Level Release Convenient to Install Practical - There are three specifications for you to choose from: 5V, 12V, 20V. 24V: 5.6cm x 13.8cm/2.2" x 5.43" (Approx.). 5V: 1.7cm x 4.33cm/0.67" x 1.7" (Approx.). 1 x Relay Module. 12V: 5.6cm x 7.6cm/2.2" x 2.99" (Approx.).
5V/12V/24V Mini Relay Module High Level Release Strong Driving Ability Useful - There are three specifications for you to choose from: 5V, 12V, 20V. 24V: 5.6cm x 13.8cm/2.2" x 5.43" (Approx.). 5V: 1.7cm x 4.33cm/0.67" x 1.7" (Approx.). The optocoupler isolation design makes it have good anti-interference performance.
5V/12V/24V Mini Relay Module Low Level Introduction Easy Operation Practical - Cell Phones & Accessories |. Cell Phones & Accessories>. 24V: 5.6cm x 13.8cm/2.2" x 5.43" (Approx.). There are three specifications for you to choose from: 5V, 12V, 20V. 1 x Relay Module. 5V: 1.7cm x 4.33cm/0.67" x 1.7" (Approx.).
5V/12V/24V Relay Module Good Anti-interference Strong Driving Ability Useful - There are three specifications for you to choose from: 5V, 12V, 20V. 24V: 5.6cm x 13.8cm/2.2" x 5.43" (Approx.). 5V: 1.7cm x 4.33cm/0.67" x 1.7" (Approx.). The optocoupler isolation design makes it have good anti-interference performance.
24V Digital Programmable Timer Relay Switch Delay Module Display U3S8 - The relay output timing is 0-999s. 1 Relay Module. Relay Pull-in Current: 45mA/. Contract Load: 10A/277V AC 10A/30V. Contract Resistance: ≤100mΩ(1A ). digital display, mounting on the, convenient and simple for user's needs.
YYA-1 Digital Delay Module Switch Control Relay Cycle Timer TA N6Y4 - P-1: Monostable trigger delay, a signal to trigger relay, is up, the relay disconnect;. P-2: A signal trigger and countdown begins, T1 seconds after, the relay open seconds, then close;. P-3: Open T1 seconds, disconnect seconds, infinite loop.
DR21A01 DPDT Module Lightweight Safe Programmable Switch Circuit Board PCB - Made of PCB, this relay module is durable. Relay module has strong safety performance and drive ability, safe and practical to use. 1 X Relay Module. Load: 1A 125V AC, 2A 30V DC. Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Delay Timer Module Automation Control Switch Relay with L8E1 - Increase the -reverse function. The use of opto isolated input and output, enhanced - capability. Industrial grade board to ensure stability. Product Weight(With ): 42g / 1.49oz. Size: 68 40 2 2mm / 2.67 1.57 0.86in (L W H).
AC Automation Digital Delay Timer Control Relay Switch Module B7J8 - The use of opto isolated input and output, enhanced - capability and consumption. Increase the -reverse function. Signal Source: Low Level Efficient. To ensure stability, industrial grade board. Display: Digital Display.
On/Off Controller S-mart Switch APP Intelligent Home A8W3 - The switch is a simple and portable -button device. With small size and simple design, enable it to put or stick on anywhere. Self- consumption: ≤0.3W. 1 User Manual. There might be a bit color distortions due to different resolutions.
RTU Relays Board DC724V 8bit MCU Quick Response Diode Leakage Protection 4 - Feature: 1. CONVERSION CHIP: The 4 way relay module has mature and stable 8bit MCU and MAX485 level conversion chip, easy to use. Communication Protocol: Support standard RTU protocol. Item Type: 4 Channel Relay Module.
RTU Relay Board Diode Leakage Protection DC724V 4 Channel Relay Module For - Communication Protocol: Support standard RTU protocol. Feature: 1. CONVERSION CHIP: The 4 way relay module has mature and stable 8bit MCU and MAX485 level conversion chip, easy to use. Item Type: 4 Channel Relay Module.
Multifunction Switch Controller Intelligent -APP Control Y7L5 - Self- consumption: ≤0.3W. Small size and simple design, enable it to put or stick on anywhere. Item type: Switch. 1 Switch. Compatible with SmartThings Hub, Wink Hub, ZigbeeHA Hub, 3 -devices direct voice matching.
YYA-1 Digital Delay Timing Module Control Relay Cycle Timer Q0C7 - P-1: Monostable trigger delay, a signal to trigger relay, is up, the relay disconnect;. P-2: A signal trigger and countdown begins, T1 seconds after, the relay open seconds, then close;. P-3: Open T1 seconds, disconnect seconds, infinite loop.
Automation Digital Delay Timer Control Switch Relay Module P5L9 - The use of opto isolated input and output, enhanced - capability and consumption. Increase the -reverse function. To ensure stability, industrial grade board. Working Current: 50mA. Static Current: 20mA.
24V Volt Voltage Test Meter Control Relay Delay Switch Module H2A8 - The relay output timing is 0-999s. 1 Relay Module. Relay Pull-in Current: 45mA/. Contract Load: 10A/277V AC 10A/30V. Contract Resistance: ≤100mΩ(1A ). P-1: Delay Setting(set the delay and pull );. To ensure stability, use industrial grade board.
2-Channel 24V 30A Relay Board Module Optocoupler Isolation - I8H5 - Using optocoupler isolation, strong - capability and stable performance. Output capacity: within 30V 30A or AC 30A. Output Capacity: within 30V 30A or AC 30A. This is a relay module with, which is convenient and practical for users.
Delay Control Switch Relay Timer Module Board with T6F5 - Increase the -reverse function. The use of opto isolated input and output, enhanced - capability. Industrial grade board to ensure stability. Product Weight(With ): 42g / 1.49oz. Size: 68 40 2 2mm / 2.67 1.57 0.86in (L W H).
AC Automation Delay Timer Switch Module Control Timing Relay L8S4 - The use of opto isolated input and output, enhanced - capability and consumption. Increase the -reverse function. Timing (Settable): 0.1~99.9 seconds; 1~999 seconds; 1~999 minutes. Signal Source: Low Level Efficient.
Multifunction Switch Controller Intelligent -APP Control G1M6 - Self- consumption: ≤0.3W. Small size and simple design, enable it to put or stick on anywhere. Item type: Switch. 1 Switch. Compatible with SmartThings Hub, Wink Hub, ZigbeeHA Hub, 3 -devices direct voice matching.
4-ch Modbus-RTU Relay Switch Module Signal input output RS485 TTL Controller - LC 4 channel Modbus relay module equipped with mature and stable 8-bit MCU and RS485 level communication chip,adopt standard MODBUS RTU format RS485 communication protocol. It can realize 4bit input signal detection and 4bit relay output.
AC Automation Digital Delay Timer Control Relay Switch Module Y3C6 - The use of opto isolated input and output, enhanced - capability and consumption. Increase the -reverse function. Signal Source: Low Level Efficient. To ensure stability, industrial grade board. Display: Digital Display.
Automation Delay Timer Adjustable Control Switch Relay Module W2N2 - Increase the -reverse function. The use of opto isolated input and output, enhanced - capability. Industrial grade board to ensure stability. Product Weight(With ): 42g / 1.49oz. Size: 68 40 2 2mm / 2.67 1.57 0.86in (L W H).
Automation Digital Delay Timer Control Switch Relay Module J1P8 - The use of opto isolated input and output, enhanced - capability and consumption. Increase the -reverse function. To ensure stability, industrial grade board. Working Current: 50mA. Static Current: 20mA.
Multifunction Switch Controller Intelligent -APP Control L8I1 - Self- consumption: ≤0.3W. Small size and simple design, enable it to put or stick on anywhere. Item type: Switch. 1 Switch. Compatible with SmartThings Hub, Wink Hub, ZigbeeHA Hub, 3 -devices direct voice matching.
Control Relay Cycle Timer Memory Function Off Trigger Delay Time 5V DC Solenoid - SIMPLE OPERATION: This is industrial grade circuit board with stable performance and the output is DC 5‑30V, AC 220V 10A. Feature: 1. INTERFERENCE RESISTANCE: The switch output adopts optocoupler isolation to enhance interference prevention ability.
for 5V/12V/24V LED Digital Timer Control Relay Module Trigger Delay Switch Bo - No interruption in the on-off process, no electric spark, no electromagnetic interference;. 2:trigger signal source: high level trigger (for DC 3.0V-24VThe signal ground and the system ground do not jointly improve the anti-interference ability of the system (also can be short-circuited by itself). ).
Trigger Delay Time Module 5V Control Relay Cycle Timer Trigger Cycle Delay Timer - SIMPLE OPERATION: This is industrial grade circuit board with stable performance and the output is DC 5‑30V, AC 220V 10A. Feature: 1. INTERFERENCE RESISTANCE: The switch output adopts optocoupler isolation to enhance interference prevention ability.
DC 12V 6-Channel Relay High/Low Level Triger Self-Lock Relay - The interlock is a typical application of the fan design. When press S1, the relay pulls in; when press S2, S1 disconnect, the relay of S2 pulls in. Practical applications such as electric fan gear switch circuit.
2 Channel DC 5V Relay Switch Module for Arduino Raspberry Pi ARM AVR - 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current. Equiped with high-current relay, AC250V 10A ; DC30V 10A. Indication LED's for Relay output status. We always try our best to resolve the issues.
ESP8266 ESP-01S 5V WiFi Relay Module Things Remote Control Switch for Phone APP - Communication: WIFI (ESP8266 module). This WIFI relay based on AI- ESP-01S WIFI module. Load: 10A/250VAC 10A/30VDC, the relay pull 100,000. We support the APP and LUA source code. Note: Light and different displays may cause the color of the item in the a little different from the real.
2X(ESP8266 ESP-01S 5V WiFi Relay Module Things Remote Control Switch for Phone A - Communication: WIFI (ESP8266 module). This WIFI relay based on AI- ESP-01S WIFI module. Load: 10A/250VAC 10A/30VDC, the relay pull 100,000. 2X(Product size: 37 25mm. Note: Light and different displays may cause the color of the item in the a little different from the real thing. ).
1X(ESP8266 ESP-01S 5V WiFi Relay Module Things Remote Control Switch for Phone A - Communication: WIFI (ESP8266 module). This WIFI relay based on AI- ESP-01S WIFI module. Load: 10A/250VAC 10A/30VDC, the relay pull 100,000. 1X(Product size: 37 25mm. Note: Light and different displays may cause the color of the item in the a little different from the real thing. ).
1pcs NEW For LRD365C Thermal Overload Relay 48-65A - Help you and us save money greatly. No one is EVER ignored! We are in endeavor to provide you best service and keep you a happy buying experience from us.
4channel Relay Module For Household Power Supply 8bit MCURTU Relay Board - Feature: 1. CONVERSION CHIP: The 4 way relay module has mature and stable 8bit MCU and MAX485 level conversion chip, easy to use. Item Type: 4 Channel Relay Module. Output Signal: Relay switch signal, support manual, flash off, flash break mode.
DC 12V RS485 Modbus RTU Relay Module UART Serial Port Switch PLC Digital Output - DC 12V RS485 Modbus RTU Relay Module UART Serial Port Switch PLC Digital Output Expansion Board Support 03 06 16 Function Code. MODBUS RTU command, Support 03 06 16 function code. Under the MODBUS command mode, it can support up to 64 devices in parallel.
Automation Delay Timer Control Switch Relay Module -Reverse NEW P0C8 - Increase the -reverse function. The use of opto isolated input and output, enhanced - capability. Industrial grade board to ensure stability. Static Current: 20mA. Working Current: 50mA. Weight: 25g / 0.89oz.
AC Automation Digital Delay Timer Control Relay Switch Module Z4O6 - The use of opto isolated input and output, enhanced - capability and consumption. Increase the -reverse function. Signal Source: Low Level Efficient. To ensure stability, industrial grade board. Display: Digital Display.
50mA Automation Digital Delay Timer Control Switch Relay Module N2H1 - Working Current: 50mA. The use of opto isolated input and output, enhanced - capability and consumption. Increase the -reverse function. To ensure stability, industrial grade board. Static Current: 20mA.
On/Off Controller S-mart Switch APP Intelligent Home T0E0 - The switch is a simple and portable -button device. With small size and simple design, enable it to put or stick on anywhere. Self- consumption: ≤0.3W. 1 User Manual. There might be a bit color distortions due to different resolutions.
4-Channel LCD Digital Relay Timer Controller Delay Switch Module 6-40V O1U8 - Effective signal input types of 4 channels can be set to high level and low level, rising and falling, etc. and can connect with external switch, and NPN. The high level signal threshold value is adjustable from 0.1V to 40.0V.