GOULDS WATER TECHNOLOGY 1DW51C0EA Plug-In Utility Pump, 1/2 HP, 115VAC - GOULDS WATER TECHNOLOGY 1DW51C0EA. Plug-In Utility Pump, 1/2 HP, 115VAC. Head 36 ft, Min. Sump Pit Dia. 10 in, Minimum Water Depth 10 in, Body Dia. 7 in, Width at Widest Point 7 in. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
DAYTON 3YU65 HP 1/3,Sump Pump,No Switch Included - Head 22 ft, Min. Sump Pit Dia. 8 in, Body Dia. 6 in, Overall Height 10 1/2 in. HP 1/3,Sump Pump,No Switch Included. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
DAYTON 3YU71 HP 1/2,Sump Pump,Vertical Float - Head 25 ft, Min. Sump Pit Dia. 10 in, Body Dia. HP 1/2,Sump Pump,Vertical Float. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Little Giant 514520 1 HP 220VAC 81 Ft Max Head Cast Iron Effluent Pump - This is a Little Giant effluent pump. Item Effluent Pump. Head 81 ft. Sump Pit Dia. Body Material Cast Iron. Impeller Material Cast Iron. We have inspected this item and we do not have the capability to fully test it.
Little Giant 514520 1 HP 230VAC 81 Ft Max Head Cast Iron Effluent Pump - This is a Little Giant effluent pump. Item Effluent Pump. Head 81 ft. Body Material Cast Iron. Sump Pit Dia. Impeller Material Cast Iron. We have inspected this item and we do not have the capability to fully test it.
Superior Pump 1/3 per hp 10/4/2022 Thermoplastic Submersible Sump Pump with - Superior Pump builds pumps that are truly built to last and are 100% factory tested. Superior Pump uses quality components including solid copper motor windings, heavy-duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Submersible sump pump with vertical float switch pumps water up to 25 vertical feet. Side discharge. 10 Ft. cord length. Can be used as a utility pump by removing the float switch. This pump is UL/cu listed and CSA certified and backed by a 3 year warranty. Type: Submersible .Size: 1/3 per hp 10/4/2022 .
DAYTON 2MYT1 Coolant Filter,30 Mesh,Aluminum - Grainger Part #:2MYT1. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Power adapters and other modifications may be necessary for proper operation in other countries.
PHCC PRO SERIES PS-WS Water Sensor Accessory,Cord 10 ft. L PK 4 - Water Sensor Accessory,Cord 10 ft. L PK 4. Grainger reserves the right to accept or reject any order. VSC2, 1APP4, Includes Float Switch Bracket, Alarm No, Float Material ABS, Handle No, Manufacturers Warranty Length 1 yr, Max.
DAYTON 19C694 Inlet Water Filter,3/4 In,GHT,100 PSI PK 5 - 1/2 M, Inlet Port (In.). 3/4 Garden Hose Thread, Bypass Port (In.). 1/4 F, Flow Range (GPM) 8, Max. 3.375 in, Width (In.). 2.25 in, Height (In.). Power adapters and other modifications may be necessary for proper operation in other countries.
Pentair 10MD05121-01 Submersible Effluent Pump 10GPM 1/2HP 1PH 115V 22E22S - Pentair 10MD05121-01 Submersible Effluent Pump 10GPM 1/2HP 1PH 115V 22E22S. Only listed it as used because it is out of packaging and has been on the shelf. It has not been installed. See pictures. Local pickup in Utah is accepted by seller. See pictures to see actual part you will receive. As shown in the photographs. Message me with any questions.
ATER 20 Series Cistern Pump 115v - Ideal for effluent or cistern pumping applications. Filtered effluent service, Cistern pumping. your warranty is void if this can not be proven the float must be a pump duty float switch. Heavy duty, 300 V, 10 ft SJOOW motor leads.
ATER 20 Series Effluent Pump 230v - Ideal for effluent pumping applications. Filtered effluent service. your warranty is void if this can not be proven the float must be a pump duty float switch. Heavy duty, 300 V, 10 ft SJOOW motor leads.
ATER 20 Series Effluent Pump 115v - Ideal for effluent pumping applications. Filtered effluent service. your warranty is void if this can not be proven the float must be a pump duty float switch. Heavy duty, 300 V, 10 ft SJOOW motor leads.
ZOELLER N137 HP 1/2,Sump Pump,No Switch Included - ZOELLER N137. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 26 ft, Min.
DAYTON 3YU54 Plug-In Utility Pump, 1/6 HP, 115VAC - Plug-In Utility Pump, 1/6 HP, 115VAC. Head 20 ft, Min. Sump Pit Dia. 18 in, Body Dia. 6 1/6 in, Overall Height 10 1/2 in, Max. Liquid Temp. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
ZOELLER N53 HP 3/10,Sump Pump,No Switch Included - ZOELLER N53. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 19 ft, Min.
ZOELLER D98 HP 1/2,Sump Pump,Vertical Float - ZOELLER D98. Head 23 ft, Min. Sump Pit Dia. 18 in, Body Dia. HP 1/2,Sump Pump,Vertical Float. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
DAYTON 3BB87 4/10 HP,Sewage Ejector Pump,120VAC - They have no screen on the bottom of the pump and a large outlet at the top to allow debris to flow through freely. The wastewater is then pumped out of the basin and up to the main sewer or septic line.
DAYTON 4HU80 1/2 HP,Sewage Ejector Pump,120VAC - They have no screen on the bottom of the pump and a large outlet at the top to allow debris to flow through freely. The wastewater is then pumped out of the basin and up to the main sewer or septic line.
DAYTON 3BB88 1/2 HP,Sewage Ejector Pump,120VAC - They have no screen on the bottom of the pump and a large outlet at the top to allow debris to flow through freely. The wastewater is then pumped out of the basin and up to the main sewer or septic line.
ZOELLER E98 1/2 HP Effluent Pump,No Switch Included - ZOELLER E98. 1/2 HP Effluent Pump,No Switch Included. Head 23 ft, Min. Sump Pit Dia. 18 in, Minimum Water Depth 18 in, Body Dia. 10 1/8 in, Width at Widest Point 7 7/8 in. Diversion contrary to U.S. law is prohibited.
ZOELLER N57 HP 3/10,Sump Pump,No Switch Included - ZOELLER N57. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 19 ft, Min.
DAYTON 4LA45 Plug-In Utility Pump, 7/10 HP, 120VAC - Plug-In Utility Pump, 7/10 HP, 120VAC. Head 38 ft, Min. Sump Pit Dia. 8 in, Minimum Water Depth 8 in, Body Dia. 7 3/16 in, Overall Height 17 3/4 in, Max. Liquid Temp. 104 Degrees F. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
DAYTON 4HU68 HP 1/3,Sump Pump,No Switch Included - They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 30 ft, Min. Sump Pit Dia.
ZOELLER N371 HP 3/10,Sump Pump,No Switch Included - ZOELLER N371. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 19 ft, Min.
RULE EV8000-100 Plug-In Utility Pump, 12VDC - We try to describe everything so you will know exactly what you're buying. We inspect each piece; if there are blemishes, defects or issues of any kind, they will be noted and photographed.
DAYTON 3BB69 HP 1/2,Sump Pump,Tether Float - They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. HP 1/2,Sump Pump,Tether Float.
ZOELLER F267 1/2 HP,Sewage Ejector Pump,230VAC - ZOELLER F267. They also use three-phase power that's more efficient than one-phase power. They have no screen on the bottom of the pump and a large outlet at the top to allow debris to flow through freely.
DAYTON 3BB70 HP 1/3,Sump Pump,Vertical Float - They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. HP 1/3,Sump Pump,Vertical Float.
ZOELLER 108-0001 3/10 HP,Pump System,120V,Vertical Float - ZOELLER 108-0001. Head 19.2 ft, Basin Dia. 3/10 HP,Pump System,120V,Vertical Float. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
DAYTON 3BB73 HP 1/3,Sump Pump,No Switch Included - They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 30 ft, Body Dia. HP 1/3,Sump Pump,No Switch Included.
ZOELLER N140 HP 1,Sump Pump,No Switch Included - ZOELLER N140. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 50 ft, Min.
DAYTON 3BB74 HP 1/2,Sump Pump,No Switch Included - They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 32 ft, Body Dia. HP 1/2,Sump Pump,No Switch Included.
ZOELLER E57 HP 3/10,Sump Pump,No Switch Included - ZOELLER E57. Head 19 ft, Min. Sump Pit Dia. 18 in, Body Dia. HP 3/10,Sump Pump,No Switch Included. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
DAYTON 4HU69 HP 1/2,Sump Pump,No Switch Included - They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 30 ft, Min. Sump Pit Dia.
LIBERTY PUMPS PRG101M 1 HP,Grinder Pump,Tether Float - 1 HP,Grinder Pump,Tether Float. Head 50 ft, Min. Sump Pit Dia. 24 in, Overall Height 17 3/4 in. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
ZOELLER 371-0004 HP 3/10,Sump Pump,No Switch Included - Head 19 ft, Min. Sump Pit Dia. ZOELLER 371-0004. HP 3/10,Sump Pump,No Switch Included. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Grainger Part #:19T427.
DAYTON 3YU76 HP 3/4,Sump Pump,Tether Float - They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 26 ft, Min. Sump Pit Dia.
DAYTON 3YU75 HP 1/2,Sump Pump,Tether Float - They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 23 ft, Min. Sump Pit Dia.
TSURUMI LB-800 Plug-In Utility Pump, 1 HP, 115VAC - TSURUMI LB-800. Plug-In Utility Pump, 1 HP, 115VAC. Head 59 ft, Min. Sump Pit Dia. 12 in, Minimum Water Depth 12 in, Body Dia. 7 9/16 in, Width at Widest Point 7 9/16 in. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
DAYTON 1APP2 HP 1/2,Sump Pump,Caged Dual Micro Reed - They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. HP 1/2,Sump Pump,Caged Dual Micro Reed.
Little Giant Submersible Pump Model 1-A #500203 115V 1/4" NPT 6' - For sale Little Giant Submersible Pump Model 1-A new never used in the original box, this box is not in the best condition, please review the photos, if you have questions send us a message and we will respond as soon as possible, shipping includes tracking number and it's free, thank you for visiting our store, everyone is welcome, we add new and used items every day, we are open to reasonable offers, our goal is to earn your 5 star feedback, if you have any concerns with your purchase, Give us a chance to make it right, if you're not satisfied, we'll give you a full refund.
Little Giant 509413 Cast Iron Sewage Pump, 4/10 HP, 115V, 1 Phase, 9SC-CIM - This is a new pump where the original box suffered some tears around the discharge causing some scrapes to the pump. Please check out all of the photos. I've added a new wood base and put the original pump box inside a new box for shipping.
LITTLE GIANT 577301 Pool Cover Pump: 1/3 hp, 115V AC,1 Phase - LITTLE GIANT 577301. Pool Cover Pump: 1/3 hp, 115V AC,1 Phase. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
PHCC PRO SERIES PS-WS Water Sensor Accessory,Cord 10 ft. L - Grainger reserves the right to accept or reject any order. VSC2, 1APP4, Includes Float Switch Bracket, Alarm No, Float Material ABS, Handle No, Manufacturers Warranty Length 1 yr, Max. Liquid Temp.
FLINT & WALLING ECP062S HP 1/6,Sump Pump,Sensor - FLINT & WALLING ECP062S. Head 23 ft, Min. Sump Pit Dia. 12 in, Body Dia. HP 1/6,Sump Pump,Sensor. Grainger reserves the right to accept or reject any order. Grainger Part #:45HR07. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
DAYTON 19C694 Inlet Water Filter,3/4 In,GHT,100 PSI - 1/2 M, Inlet Port (In.). 3/4 Garden Hose Thread, Bypass Port (In.). 1/4 F, Flow Range (GPM) 8, Max. 3.375 in, Width (In.). 2.25 in, Height (In.). This machined aluminum filter assures a clean water stream for any high-pressure pump.
DAYTON 11C687 Plug-In Utility Pump, 1/2 HP, 120VAC - Plug-In Utility Pump, 1/2 HP, 120VAC. Head 35 ft, Min. Sump Pit Dia. 18 in, Minimum Water Depth 12 in, Body Dia. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
DAYTON 2JGA6 1 HP,Sewage Ejector Pump,230VAC - They remove sewage containing solids from drains where a gravity system won't work, such as in septic systems that are below the main sewer line. They have no screen on the bottom of the pump and a large outlet at the top to allow debris to flow through freely.
DAYTON 2JGA2 4/10 HP Effluent Pump,Tether Float - 4/10 HP Effluent Pump,Tether Float. Head 32 ft, Min. Sump Pit Dia. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
LITTLE GIANT 558910 1/2 HP Effluent Pump,No Switch Included - LITTLE GIANT 558910. 1/2 HP Effluent Pump,No Switch Included. Head 250 ft, Body Dia. 4 in, Overall Height 31 in. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited.
PROFLO PF39006 6" Cast Iron Test Plug With Wingnut - PROFLO PF39006 Features Malleable iron wing nut and cap. With wing nut. Cast iron top and bottom plate. Alno A9091 Nickel Embassy Adjustable Mounting Brackets For Alno Mirrors. OUR PROMISE TO YOU. Why Choose BuildInc?.
Superior Pump 1/2 per hp 10/4/2022 Thermoplastic Submersible Sump Pump with - Superior Pump builds pumps that are truly built to last and are 100% factory tested. Superior Pump uses quality components including solid copper motor windings, heavy-duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Submersible sump pump with vertical float switch pumps water up to 25 vertical feet. Side discharge. 10 Ft. cord length. Can be used as a utility pump by removing the float switch. This pump is UL/cu listed and CSA certified and backed by a 3 year warranty. Type: Submersible .Size: 1/2 per hp 10/4/2022 .
Dayton 3BB80 3/4 HP 120VAC 37 Ft Max Head Submersible Sump Pump (D) - Switch Actuation Diaphragm. Head 37 ft. We have inspected this item and we were unable to get it to power on when plugged in. We do not have the capability to test the unit any further. Body Material Cast Iron.
LITTLE GIANT 511931 Sewage pump,115V,60Hz,Single - LITTLE GIANT 511931. Sewage pump,115V,60Hz,Single. Grainger reserves the right to accept or reject any order. Grainger Part #:61DW90. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
DAYTON 18" Slotted Sewage Basin Cover 4RK41 - Item : Slotted Sewage Basin Cover. Basin Dia. Cover Material : Plastic. Country of Origin (subject to change) : United States. Quick Links. Outlet : 2-1/2 x 11-1/2. Health & Beauty. sporting goods.
Pompe à Eau Submersible En Acier Pompe Submersible Dc 12V Haute Ascenseur Pour - Ascenseur : 11 m. Lieu de transport : pompe à eau propre. Fabriqué en acier de haute qualité, il est durable, résistant à la corrosion et à la rouille. Matériel : Acier. Garniture mécanique de haute précision, bague d'étanchéité sélectionnée, bonne étanchéité et longue durée de vie.
LITTLE GIANT 506158 HP 1/3,Sump Pump,Diaphragm - LITTLE GIANT 506158. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. HP 1/3,Sump Pump,Diaphragm.
LITTLE GIANT 509932 Sewage pump,115V,60Hz,Single - LITTLE GIANT 509932. Sump Pit Dia. Sewage pump,115V,60Hz,Single. Grainger reserves the right to accept or reject any order. Grainger Part #:61DW89. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
Goulds Water Technology WS5034D3 5 HP 1725 RPM 460VAC Sewage Ejector Pump - This is a Goulds Water Technology sewage ejector pump. The body and impeller are made of cast iron. Item Sewage Ejector Pump. RPM 1,725 RPM. We have inspected this item and we do not have the capability to fully test it.
DAYTON 3YU74 HP 1/3,Sump Pump,Tether Float - They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 16 ft, Min. Sump Pit Dia.
Little Giant LG-SEW50T Sewage Pump - BUILT TO LAST: This automatic heavy duty 115 Volt cast iron pump is ideal for use in residential sewage and septic systems.
LITTLE GIANT 620241 Plug-In Utility Pump, 1 HP, 115VAC - LITTLE GIANT 620241. Plug-In Utility Pump, 1 HP, 115VAC. Head 52 ft, Body Dia. 7 1/4 in, Width at Widest Point 7 1/4 in, Overall Height 14 in. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
MACROMATIC SFP120C100 Pump Seal Failure Relay, 120VAC - MACROMATIC SFP120C100. Pump Seal Failure Relay, 120VAC. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
DAYTON 1XHV4 Plug-In Utility Pump, 1/2 HP, 120VAC - Plug-In Utility Pump, 1/2 HP, 120VAC. Head 36 ft, Min. Sump Pit Dia. 10 in, Minimum Water Depth 10 in, Body Dia. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
Kraft&Dele UPS 2000VA 1200W ÉCRAN LCD Alimentation de secours KD1930 - ASI 2000VA 1200W ÉCRAN LCD KD1930. MODÈLE : KD1930. Capacité : 2000VA. Les onduleurs avec écran LCD de Kraft&Dele se caractérisent par une fiabilité et une durabilité élevées. Puissance : 1200W. Tension de sortie : 220 V ± 10 % (mode batterie).
TSURUMI LB-480A Plug-In Utility Pump, 2/3 HP, 110VAC - TSURUMI LB-480A. Plug-In Utility Pump, 2/3 HP, 110VAC. Head 39 ft, Min. Sump Pit Dia. 12 in, Minimum Water Depth 12 in, Body Dia. 8 3/4 in, Width at Widest Point 8 3/4 in. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
DAYTON 11C685 Plug-In Utility Pump, 1/4 HP, 120VAC - Plug-In Utility Pump, 1/4 HP, 120VAC. Head 20 ft, Min. Sump Pit Dia. 18 in, Minimum Water Depth 12 in, Body Dia. 5 5/8 in, Width at Widest Point 5 5/8 in. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
TSURUMI HS3.75S-62 Plug-In Utility Pump, 1 HP, 115VAC - TSURUMI HS3.75S-62. Plug-In Utility Pump, 1 HP, 115VAC. Head 62 ft, Min. Sump Pit Dia. 20 in, Minimum Water Depth 20 in, Body Dia. 12 7/16 in, Width at Widest Point 12 7/16 in. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
LIBERTY PUMPS 257 Submersible Sump Pump,HP 1/3,115V,60 Hz - Head 23 ft, Min. Sump Pit Dia. 10 in, Body Dia. 6 1/2 in, Overall Height 10 1/2 in. Grainger reserves the right to accept or reject any order. Grainger Part #:56KD45. Order Acceptance. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Self-Priming Portable Water Transfer Utility Pump 115 V 1/10 HP - HPUTP390 - Model: HPUTP390. Water Transfer Utility Pump - Portable. Patented design, flexible impeller, 1/10 HP 390 GPH plastic water transfer utility pump. Horsepower: 1/10 HP. Water transfer up to 390 gallons per hour, maximum lift up to 55 feet.
Cast Iron Sump Pump Tethered Float Switch HPSPCIT4500 - 4500 GPH, 1/2 HP - The maximum flow rate is up to 4000 GPH. Hidropoint Sump Pump. 10' piggy-back tether float switch for automatic or manual operation. Rugged cast iron construction maximizes pump life. Upper and lower sealed roller ball bearings for quiet performance.
Cast Iron Sump Pump Vertical Switch HPSPCIV4500 - 4500 GPH 115V, 1/2 HP - The maximum flow rate is up to 4500 GPH. 10' piggy-back tether float switch for automatic or manual operation. Rugged cast iron construction maximizes pump life. Upper and lower sealed roller ball bearings for quiet performance.
Cast Iron Sump Pump Tethered Float Switch HPSPCIT4000 - 4000 GPH, 1/3 HP - The maximum flow rate is up to 4000 GPH. Hidropoint Sump Pump. 10' piggy-back tether float switch for automatic or manual operation. Rugged cast iron construction maximizes pump life. Upper and lower sealed roller ball bearings for quiet performance.
220V Agricultural Irrigation Pump Sewage Pump High Lift Agricultural Water Pump - 220V High-lift Agricultural Water Pump Wewage Pump Irrigate Pumper. After the water level rises, the float automatically rises and the pump starts to work. There is a cutting device in the pump, which can cut impurities containing a small amount of fiber and a small amount of seaweed.
ZOELLER 10-0682 Outdoor High Water Alarm,Auto Reset - This Zoeller outdoor high water alarm system can monitor liquid levels in holding tanks, lift pump chambers, sump pump basins in agricultural, sewage, and other nonpotable water applications. Model can warn of a high water situation with horn and red warning light.
ZOELLER 98-0077 HP 1/2,Sump Pump,Vertical Float - They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 23 ft, Min. Sump Pit Dia.
ZOELLER N153 1/2 HP Effluent Pump,No Switch Included - ZOELLER N153. 1/2 HP Effluent Pump,No Switch Included. Head 44 ft, Min. Sump Pit Dia. 18 in, Minimum Water Depth 18 in. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited.
Dayton 4KU61 1/2 HP 1750 RPM 120VAC 22 Ft Max Head Sump Pump - Item Sump Pump. Sump Pit Dia. RPM 1,750 RPM. We have inspected this item and it powers on when plugged in. We do not have the capability to test the unit any further. Head 22 ft. Flow Rate @ 5 Ft. of Head 60.0 gpm.
DAYTON 2VAN7 Plug-In Utility Pump, 1/4 HP, 120VAC - Plug-In Utility Pump, 1/4 HP, 120VAC. Head 20 ft, Min. Sump Pit Dia. 6 3/4 in, Body Dia. 6 in, Overall Height 11 3/4 in, Max. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
DAYTON 4HU74 1/2 HP Effluent Pump,Tether Float - 1/2 HP Effluent Pump,Tether Float. Head 31 ft, Min. Sump Pit Dia. 18 in, Minimum Water Depth 18 in, Body Dia. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
LIBERTY PUMPS LE41A Submersible Sewage Pump,HP 4/10,115V - 7 1/2 in, Width at Widest Point 10 7/8 in. Grainger reserves the right to accept or reject any order. Grainger Part #:56KD52. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
DAYTON 3BB89 1/2 HP,Sewage Ejector Pump,240VAC - They remove sewage containing solids from drains where a gravity system won't work, such as in septic systems that are below the main sewer line. They have no screen on the bottom of the pump and a large outlet at the top to allow debris to flow through freely.
Drummond Submersible Utility Pump Water 1/6 HP Pump Tested - Drummond Submersible Utility Pump Water 1/6 HP Pump Tested. In Great Working Condition. Please Refer To Pictures For Full Description. I Try To Discribe My Items The Best As I Can If You Have Any Questions Please Feel Free To Ask Me. Will Ship With USPS Priority Mail or FedEx. Thank you
WATTS RADIANT 423250HW LoudMouth Monitor, 9 Volt - WATTS RADIANT 423250HW. LoudMouth Monitor, 9 Volt. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion.
LITTLE GIANT 558912 1/2 HP Effluent Pump,No Switch Included - LITTLE GIANT 558912. 1/2 HP Effluent Pump,No Switch Included. Head 115 ft, Body Dia. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Grainger Part #:2EHP4.
TSURUMI HSZ3.75S-61 Plug-In Utility Pump, 1 HP, 115VAC - TSURUMI HSZ3.75S-61. Plug-In Utility Pump, 1 HP, 115VAC. Head 62 ft, Min. Sump Pit Dia. 21 in, Minimum Water Depth 21 in, Body Dia. 13 1/2 in, Width at Widest Point 13 1/2 in. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
DAYTON 4LA43 Plug-In Utility Pump, 1-1/4 HP 120VAC - Plug-In Utility Pump, 1-1/4 HP 120VAC. Head 50 ft, Min. Sump Pit Dia. 8 in, Minimum Water Depth 8 in, Body Dia. 7 3/16 in, Overall Height 18 1/2 in, Max. Liquid Temp. 104 Degrees F. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
Zoeller 161-0001 M161-E Thermally Protected 1/2 HP, 115 V, 1 Ph, 15.5 Amps - Zoeller Flow-Mate M161 (161-0001) For septic tanks, low-pressure pipes (LPP), and enhanced flow STEP systems. Motor: 1/2 HP, 115 V. Cap, Base, Motor Housing and Pump Housing all made of cast iron. Durable, cast iron constructed switch case, base, motor and pump housing.
Zoeller 161-0001 M161-E Thermally Protected 1/2 HP, 115 V, 1 Ph, 15.5 Amps - Zoeller Flow-Mate M161 (161-0001) For septic tanks, low-pressure pipes (LPP), and enhanced flow STEP systems. Motor: 1/2 HP, 115 V. Cap, Base, Motor Housing and Pump Housing all made of cast iron. Durable, cast iron constructed switch case, base, motor and pump housing.
Dayton 3BB88 1/2 HP 1750 RPM 120VAC 25 Ft Max Head Sewage Ejector Pump - The pump horsepower (HP) is 1/2 and the motor RPM is 1750. It is single phase. It has a tether float. The gallons per minute (GPM) of water at 10 feet of head is 111. Item Sewage Ejector Pump. RPM 1,750 RPM.
BARNES 2SEV2022DS 2 HP,Sewage Ejector Pump,240VAC - BARNES 2SEV2022DS. 2 HP,Sewage Ejector Pump,240VAC. 12 5/8 in, Overall Height 20 39/50 in. Grainger reserves the right to accept or reject any order. Grainger Part #:24PK75. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
Dayton 11A342 2 HP 2900 RPM 240VAC 82 Ft Max Head Grinder Pump (D) - Item Grinder Pump. RPM 2,900 RPM. Head 82 ft. Sump Pit Dia. We have inspected this item and we do not have the proper outlet on site to fully test it. One of the legs has broken off and there is a hole in the bottom.
Dayton 4HU75 1/2 HP 3450 RPM 120VAC 79.0 Ft Max Head Effluent Pump (D) - Item Effluent Pump. RPM 3,450 RPM. Head 79 ft. Sump Pit Dia. We have inspected this item and it does not power on when plugged in. We do not have the capability to test the unit any further. Flow Rate @ 15 Ft. of Head 70 gpm.
LITTLE GIANT 620240 Plug-In Utility Pump, 1/2 HP, 115VAC - LITTLE GIANT 620240. Plug-In Utility Pump, 1/2 HP, 115VAC. Head 37 ft, Body Dia. 7 5/16 in, Width at Widest Point 8 in, Overall Height 12 in, Max. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
Goulds LSP0311AV 1/3HP Submersible Sump Pump 1PH 115V Piggyback Vertical Switch - Upper and lower heavy duty ball bearings construction. The shaft is hard coated 400 series stainless for improved corrosion resistance. The motor is permanently lubricated for extended service life and is powered for continuous operation.
ZOELLER N98 HP 1/2,Sump Pump,No Switch Included - ZOELLER N98. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 23 ft, Min.
ZOELLER N264 4/10 HP,Sewage Ejector Pump,115VAC - ZOELLER N264. They have no screen on the bottom of the pump and a large outlet at the top to allow debris to flow through freely. The wastewater is then pumped out of the basin and up to the main sewer or septic line.
LIBERTY PUMPS PRG102M 1 HP,Grinder Pump,Tether Float - 1 HP,Grinder Pump,Tether Float. Head 50 ft, Min. Sump Pit Dia. 24 in, Overall Height 17 3/4 in. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
RULE A53D Plug-In Utility Pump, 1/6 HP, 110VAC - Plug-In Utility Pump, 1/6 HP, 110VAC. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
LIBERTY PUMPS LE41A-2 Submersible Sewage Pump,HP 4/10,115V - 7 1/2 in, Width at Widest Point 10 7/8 in. Grainger reserves the right to accept or reject any order. Grainger Part #:56KD53. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
DAYTON 4RK34 Basin Fitting,Polymer, Gasket Fitting - They securely hold outlet pipes and vent pipes in place where they exit the basin cover.Sump basins, covers, and fittings keep dirt and debris from entering the sump pit and clogging the sump pump inlet.
DAYTON 4RK10 Sump Basin,Cap. 11.0 gal,Structural Foam - These sump basins are inserted into the sump pit to keep ground soil from entering the sump pit and clogging the sump pump intake. They are drum-shaped containers with a closed bottom, an open top with a lip that extends out, and a side opening for a pipe inlet.Sump basins, covers, and fittings keep dirt and debris from entering the sump pit and clogging the sump pump inlet.
DAYTON 1XHV7 HP 1/2,Sump Pump,No Switch Included - They are commonly used to drain water in sump pits. Head 32 ft, Min. Sump Pit Dia. 11 in, Body Dia. 10 in, Overall Height 16 1/4 in. HP 1/2,Sump Pump,No Switch Included. Grainger reserves the right to accept or reject any order.
DAYTON 1XHV5 Plug-In Utility Pump, 1 HP, 120VAC - Plug-In Utility Pump, 1 HP, 120VAC. Head 49 ft, Min. Sump Pit Dia. 11 in, Minimum Water Depth 11 in, Body Dia. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
PHCC PRO SERIES PHCC-1000 Back-up Pump,12VDC,Float,1-1/4"NPT - PHCC PRO SERIES PHCC-1000. Back-up Pump,12VDC,Float,1-1/4"NPT. Sump Pit Dia. They automatically start when the primary pump fails and don't require corded electrical power. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
PHCC PRO SERIES B-1000 Sump Pump Battery,12V,70Ah,Requires Acid - PHCC PRO SERIES B-1000. They require filling with battery acid before installation. These batteries are designed to work with specific sump pump models. Sump Pump Battery,12V,70Ah,Requires Acid. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
FLINT & WALLING ECP061 HP 1/6,Sump Pump,No Switch Included - FLINT & WALLING ECP061. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug. Head 23 ft, Min.
TSURUMI HSD2.55S-62 Plug-In Utility Pump, 3/4 HP, 120VAC - TSURUMI HSD2.55S-62. Plug-In Utility Pump, 3/4 HP, 120VAC. Head 43 ft, Min. Sump Pit Dia. 14 in, Minimum Water Depth 14 in, Body Dia. 10 3/8 in, Width at Widest Point 9 3/4 in. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
DAYTON 3YU68 HP 1/2,Sump Pump,Tether Float - Head 25 ft, Min. Sump Pit Dia. 12 in, Body Dia. HP 1/2,Sump Pump,Tether Float. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
RULE A53S24-GRA HP 1/4,Sump Pump,Sensor - Head 15 ft, Body Dia. Liquid Temp. 104 Degrees F, Thermal Protection Yes, Width at Widest Point 4 1/4 in, Duty Cycle Continuous. HP 1/4,Sump Pump,Sensor. RULE A53S24-GRA. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
DAYTON 2JGA5 1/2 HP,Sewage Ejector Pump,115VAC - They have no screen on the bottom of the pump and a large outlet at the top to allow debris to flow through freely. The wastewater is then pumped out of the basin and up to the main sewer or septic line.
DAYTON 2JGA3 1/2 HP Effluent Pump,Tether Float - 1/2 HP Effluent Pump,Tether Float. Head 36 ft, Min. Sump Pit Dia. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Used Surplus AMT Pump 399C-95 Spare Casing Part 1990-031-00 - This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
DAYTON 3YU70 HP 1/3,Sump Pump,Vertical Float - Head 22 ft, Min. Sump Pit Dia. 10 in, Body Dia. HP 1/3,Sump Pump,Vertical Float. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
LITTLE GIANT 509931 Sewage pump,115V,60Hz,Single - LITTLE GIANT 509931. Sump Pit Dia. 18 in, Body Dia. Sewage pump,115V,60Hz,Single. Grainger reserves the right to accept or reject any order. Grainger Part #:61DW88. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
DAYTON 4RK39 Sewage Basin Cover, Steel,24" ID,28" OD - Sump pump basins and sump pump covers contain the pump, float, and pipe inside the sewage pit. Sewage Basin Cover, Steel,24" ID,28" OD. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited.
DAYTON 40GT80 Plug-In Utility Pump, 1/4 HP, 120VAC - Plug-In Utility Pump, 1/4 HP, 120VAC. Head 20 ft, Min. Sump Pit Dia. 6 3/4 in, Body Dia. 6 in, Width at Widest Point 7 45/64 in, Overall Height 11 3/4 in, Max. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
DAYTON 1APP4 Caged Dual Micro Reed,Piggyback,120VAC - Caged Dual Micro Reed,Piggyback,120VAC. When water rises to a preset level in the sump basin the switch turns on and the pump starts. Sump and sewage diaphragm switches sense pressure against the diaphragm to detect how much water is present in the basin.
DAYTON 4NY25 1/2 HP Effluent Pump,No Switch Included - 1/2 HP Effluent Pump,No Switch Included. Head 230 ft, Min. Sump Pit Dia. 4 in, Body Dia. 4 in, Overall Height 22 1/2 in. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited.
DAYTON 4NY26 1/2 HP Effluent Pump,No Switch Included - 1/2 HP Effluent Pump,No Switch Included. Head 175 ft, Min. Sump Pit Dia. 4 in, Body Dia. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Grainger Part #:4NY26.
DAYTON 2JGA4 4/10 HP,Sewage Ejector Pump,115VAC - They have no screen on the bottom of the pump and a large outlet at the top to allow debris to flow through freely. The wastewater is then pumped out of the basin and up to the main sewer or septic line.
LITTLE GIANT 14940654 Sump Basin Cover,Polyethelene, 20-1/2" - LITTLE GIANT 14940654. Sump Basin Cover,Polyethelene, 20-1/2". Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Power adapters and other modifications may be necessary for proper operation in other countries.
SANDPIPER SPA1 1/2E3. Dewatering Pump,No Switch,12VDC - SANDPIPER SPA1 1/2E3. Dewatering Pump,No Switch,12VDC. Head 25 ft, Body Dia. 10 in, Overall Height 19 1/4 in, Max. Liquid Temp. 150 Degrees F, Thermal Protection Automatic. Grainger reserves the right to accept or reject any order.
DAYTON 4HDZ8 1/3 HP Effluent Pump,Tether Float - 1/3 HP Effluent Pump,Tether Float. Head 28 ft, Min. Sump Pit Dia. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
PHCC PRO SERIES PS-C22 Sump/Battery Backup System,10Amps Backup - Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Sump/Battery Back-Up System. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
DAYTON 3YU67 HP 1/3,Sump Pump,Tether Float - Head 22 ft, Min. Sump Pit Dia. 12 in, Body Dia. HP 1/3,Sump Pump,Tether Float. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
LITTLE GIANT 558911 1/2 HP Effluent Pump,No Switch Included - LITTLE GIANT 558911. 1/2 HP Effluent Pump,No Switch Included. Head 160 ft, Body Dia. 4 in, Overall Height 31 in. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited.
DAYTON 1XHV6 HP 1/3,Sump Pump,No Switch Included - They are commonly used to drain water in sump pits. Head 29 ft, Min. Sump Pit Dia. 8 in, Body Dia. HP 1/3,Sump Pump,No Switch Included. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited.
DAYTON 11C686 Plug-In Utility Pump, 1/3 HP, 120VAC - Plug-In Utility Pump, 1/3 HP, 120VAC. Head 32 ft, Min. Sump Pit Dia. 18 in, Minimum Water Depth 12 in, Body Dia. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
DAYTON Plug-In Utility Pump, 1/4 HP, 120VAC 2VAN7 - Head : 20.0 ft. Cord Length : 9 ft. Head 20 ft, Min. Sump Pit Dia. 6 3/4 in, Body Dia. 6 in, Overall Height 11 3/4 in, Max. Pump Body Material : Thermoplastic. Best Match.
WATTS RADIANT LoudMouth Monitor, 9 Volt 423250HW - Item : LoudMouth Monitor. Requires : 9 Volt Battery. Quick Links. Country of Origin (subject to change) : China. Height : 1 in. For Use With : HeatWeave, UnderFloor, WarmWire, SlabHeat.
General Electric 1/4 (.25) HP Sump Pump 5XBG0000D SPMA - For sale is a General Electric SPMA Sump Pump: 5XBG0000D, 1/4 HP. The item appears to have been used by the previous owner. Overall the item appears to be in good, used, ready to use condition. The item has been successfully tested.
Dayton 4HU73 1/2 HP 3450 RPM 120VAC 31 Ft Max Head Effluent Pump - Item Effluent Pump. RPM 3,450 RPM. Sump Pit Dia. Head 31 ft. We have inspected this item and it powers on when plugged in. We do not have the capability to install the unit to test it any further. Flow Rate @ 10 Ft. of Head 78 gpm.
DAYTON 24" Sewage Basin Cover 4RK39 - Item : Sewage Basin Cover. Basin Dia. Cover Material : Steel. Material of Construction : Steel. Material : Steel. Country of Origin (subject to change) : United States. Quick Links. Outlet : 2".
Dayton 4LE13 2 HP 3450 RPM 460VAC 86 Ft Max Head Effluent Pump - Item Effluent Pump. RPM 3,450 RPM. Head 86 ft. Sump Pit Dia. We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional.
H2O PRO 1/3 HP Cast Iron Submersible Sump Pump - Engineered by Zoeller - Professional grade sump pump engineered by Zoeller - Max flow rate 50 gallons per minute. Sump pump with vertical electromagnetic switch to fit in 10" or larger pits - features convenient 8 ft. double-sealed power cord.
ZOELLER 10-0763 High Water Alarm,Battery Powered - Warns you of overflowing air conditioning pans, bathtubs, broken pipes, dishwashers, sinks, washing machines, and sump pump failure. ZOELLER 10-0763. High Water Alarm,Battery Powered. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
Dayton 3BB79 1/2 Hp Submersible Sump Pump, 120VAC, 80 GPM, 1-1/2" Discharge - Location 146B New without original packaging. *SHOWING SOME SIGNS OF SHELF WEAR SUCH AS SCUFFS, SCRATCHES AND CHIPPED OFF FINISH Dayton 3BB79 1/2 Hp Submersible Sump Pump, 120VAC, 80 GPM, 1-1/2" Discharge. Submersible Sump Pump: 1/2, Diaphragm, 70 gpm Flow Rate @ 10 Ft. of Head, 15 ft Cord Lg
💥Dayton Dual Float Switch 1App4 - MODEL NO. 1APP4. WE ARE HAPPY TO HELP! ORDERS PUT IN BEFORE 12PM WILL GO OUT. AND WE DON'T SEE THEM.
Zoeller 0.5-HP 60GPM Cast Iron Submersible Sump Pump (1075-0001) - Zoeller Cast Iron Sump Pump, non-clogging vortex impeller. All stainless steel hardware. Vertical switch easily fits into as small as a 10 In. sump basin. Rugged cast iron motor housing for long life.
Barnes BP25VF 1/4 .25 HP 3450-RPM 115v Submersible Sump Pump Ejector - Barnes BP25VF Submersible for general purpose residential, commercial and light industrial sump applications.Used and appears to be in good working order. The pump does have some wear and could use a little cleaning. Only comes with what is shown in photos. Motor 1/4 HpRPM 3450Electrical 115 voltCord Length 10 ft.Construction Cast Iron and ThermoplasticImpeller ThermoplasticDischarge 1-1/2 "Solids 1/4 "Manual Operation yesAutomatic Operation Vertical FloatWeight 17 lbs.
*NEW* Liberty Pumps Model 405 Commercial 1/2 HP Drain Pump 115 Volt - *NEW* Liberty Pumps 405 Commercial 1/2 HP Drain Pump. Condition: New - Never UsedShipping: Fast from U.S.ACord Length: 10ftVoltage: 115VCode: 100 (For Seller, Buyer Disregard)Keywords: Liberty Pumps, Liberty Pumps model 405, 405, model 405, liberty pumps drain pump
Dayton Sump Pump 3BB75, 120V AC, 3/4 HP, 113 GPM, 1-1/2" FNPT, 37' Maximum Head - Location 149B*GROUND PRONG ON THE PLUG IS DAMAGED AS SHOWN IN THE PICTURES *SHOWING SOME SIGNS OF SHELF WEAR SUCH AS SCUFFS, SCRATCHES AND CHIPPED OFF FINISH *PLEASE SEE PICTURES FOR CONDITION AND DETAILS New without original packaging. What you see in the pictures is what you will be receiving. Dayton Sump Pump 3BB75, 120V AC, 3/4 HP, 113 GPM, 1-1/2" FNPT, 37' Maximum Head.
DAYTON 1/4 HP 1-1/4" F Plug-In Utility Pump 120V AC No Switch 11C685 - Item : Plug-In Utility Pump. Head 20 ft, Min. Sump Pit Dia. 18 in, Minimum Water Depth 12 in, Body Dia. 5 5/8 in, Width at Widest Point 5 5/8 in. Head : 20.0 ft. Cord Length : 20 ft. Shaft Seal : Ceramic, Buna N, Stainless Steel.
1/3 HP Cast Iron / Cast Aluminum Submersible Sump Pump - The ST Series 1/3 HP Cast Iron / Cast Aluminum Sump Pump is built with premium components for the professional contractor. It is thermally protected, has stainless steel fasteners, and dual carbon-ceramic shaft seals for long life.
Zoeller N98 Submersible Sump Pump Effluent Septic 1/2 HP 115V Dewatering Water - THIS IS A GENUINE OEM ZOELLER PUMP! Non-Automatic Pump 1/2 HP 115V. Fits: (may fit various models, you are responsible to verify this is the correct part number for your application). This is the CHEAPEST price ANYWHERE on a genuine part.
LITTLE GIANT 508913 Submersible Sump Pump, 115V 50/60Hz 10A 1PH - Location 56B*THIS PUMP DOESN'T LOOK TO HAVE BEEN USED MUCH IF ANY BUT THE DIAPHRAGM OUTER CASE IS BROKEN AS SHOWN IN THE PICTURES *USED UNTESTED UNKNOWN WORKING CONDITION AS-IS *FOR PARTS OR REPAIR LITTLE GIANT 508913 Submersible Sump Pump, 115V 50/60Hz 10A 1PH.
Dayton 3BB74 1/2 HP 120VAC 32 Ft Max Head Submersible Sump Pump - The body and impeller are made of cast iron. Head 32 ft. We have inspected this item and it powers on when plugged in. We do not have the capability to install the unit to test it any further. Body Material Cast Iron.
Dayton 4LE13 2 HP 3450 RPM 460VAC 86 Ft Max Head Effluent Pump - Item Effluent Pump. RPM 3,450 RPM. Head 86 ft. Sump Pit Dia. We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional.
Dayton 3BB79 1/2 Hp Submersible Sump Pump, 120VAC, 80 GPM, 1-1/2" Discharge - Flow Rate @ 5 Ft. of Head 80.0 gpm. Flow Rate @ 10 Ft. of Head 70.0 gpm. Flow Rate @ 15 Ft. of Head 62.0 gpm. Flow Rate @ 20 Ft. of Head 50.0 gpm. Switch Actuation Diaphragm. Body Material Cast Iron. Impeller Material Cast Iron.
ZOELLER 10-0763 High Water Alarm,Battery Powered, AquaNot 100763 Box11 - AquaNot water alarm by Zoeller 10-0763. Low battery alarm designed into circuit board. Flexible sensor wire allows this alert to be used in many applications. Alerts you of overflowing sump pump failure, toilets, dishwashers, broken pipes, air conditioning pans, bath tubs, laundry sinks, hot tubs and washing machines.
Pompe Kraft & Dele pour flotteur de fosse septique sale et propre KD752 - Conception unique, faite de matériaux de la plus haute qualité. Modèle : KD752. Commutateur automatique : oui - flotteur. L'appareil est conçu pour pomper l'eau sale, y compris les fosses septiques, les eaux usées et autres liquides contaminés.
DAYTON Basin Cover , PPSFO6LG - Item : Basin Cover. Product Type : Basin Cover. Country of Origin (subject to change) : United States. For Use With Grainger Item Number : 12F738, 12F740, 12F741, 2F739. Quick Links. Everything Else.
Stainless Steel Electric Corrosion Resistant Magnetic Centrifugal Water Pump - Magnetic Drive Centrifugal Pump is crystallization in the hi-tech field of magnetic pump. (MP-40RM) Stainless Steel Electric Corrosion Resistant Magnetic Portable Centrifugal Water Pump 220V. MP magnetic pump has a unique design with stylish appearance.
DAYTON 1APP4 Dual Float Switch Caged Dual Micro Reed, Piggyback, 120VAC, 12A - Location FC24-5Used in very good condition. Unable to test the Float. Does power on and seems to work as it should. Float cage does come apart.DAYTON 1APP4 Dual Float Switch Caged Dual Micro Reed, Piggyback, 120VAC, 12A.Float Switch: 110V AC, 10 ft Cord Lg, 12 A Amps, Adj, 104°F Max. Liquid Temp.
PHCC PRO SERIES Water Sensor Accessory, Cord 10 ft. L PS-WS - VSC2, 1APP4, Includes Float Switch Bracket, Alarm No, Float Material ABS, Handle No, Manufacturers Warranty Length 1 yr, Max. Liquid Temp. 104 Degrees F, Off Point 1/4 in, On Point 1/4 in. Item : High Water Sensor Accessory.
TEEL 1/4 HP HEAVY DUTY Submersible Sump Pump Model 1P67 - Manufacturer: TEEL. Test Results: Tested for key functions. Electronics Cafe specializes in used electronics. Local pickup is always an option. This item is used and in good working order. The item powered on.
Zoeller N161 1/2 HP 3450 RPM 115VAC 56.0 Ft Max Head Effluent Pump (D) - This is a Zoeller effluent pump. Item Effluent Pump. RPM 3,450 RPM. Sump Pit Dia. We have inspected this item and it powers on when plugged in. We do not have the capability to install the unit to test it any further.
Gorman-Rupp 27515-561 Submersible Pump Control Panel S-Series -NIB - WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. has a way to unload the pallet/item or if we need to arrange for a lift. • Local pick up. THIS ITEM IS NEW IN THE BOX. SEE ALL PHOTOS FOR FULL CONDITION.
Liberty Pumps HT41A-2 4/10 115VAC High-Temperature Submersible Effluent Pump (D) - Minimum Water Depth 18 in. Cord Length 25 ft. On Point 12 in. Flow Rate @ 15 Ft. of Head 31.0 gpm. Head 20 ft. Flow Rate @ 10 Ft. of Head 51 gpm. My driver will be 100% responsible for the item after it is signed for and released to him/her.
DAYTON 3BB86 1 HP Effluent Pump USED - They are used to drain treated water containing small solids from septic tanks and out to a drain field. Sea Gull Lighting 84031 Oxford Bronze Kent 1 Light Outdoor Lantern Wall Sconce. WeldingCity Nozzle 25CT-75 3/4" for Tweco Lincoln 500/600A MIG Gun.
Liberty Pumps 241 1/4 HP 3400 RPM 115VAC 21.0 Ft Max Head Sump Pump (C) - Item Sump Pump. Sump Pit Dia. RPM 3,400 RPM. We have inspected this item and it powers on when plugged in. We do not have the capability to install the unit to test it any further. Head 21.0 ft. Flow Rate @ 5 Ft. of Head 30.0 gpm.
Drummond 1/2 HP Submersible Sewage Pump W/ Tether Switch **NEW FACTORY SEALED** - I live out in the country where I take care of my own sewer system which consists of a Septic Tank, Sump and a Lagoon. I have been using these Drummond Sump pumps for years without any problems. If you have a question about this pump and usages let me know because I can probably answer it. Drummond 1/2 HP Submersible Sewage Pump W/ Tether Switch **NEW FACTORY SEALED**. Condition is New. Shipped with USPS Priority Mail.
Zoeller 1/3-HP 115-Volt Cast Iron Submersible Sump Pump 1073 - Zoeller 1/3-HP 115-Volt Cast Iron Submersible Sump Pump 1073. The 0.33 HP pump quickly eliminates water from your sump pit providing up to a 42 GPM performanceThe rugged cast iron construction and non-clogging vortex impeller provides long-term peace of mindThis pump features a premium electro-magnetic float switch for reliable water removal and long pump lifeProtect your basement or crawl space with the Zoeller pro 0.33 HP sump pumpMinimum 10 in. X 18 in. basin size required1-1/2 in. NPT discharge9 ft. cord***Works properly, Mistreated packaging
ZOELLER High Water Alarm, Battery Powered 10-0763 - Item : Indoor High Water Alarm. Product Type : Indoor High Water Alarm. Includes : Water Sensor with 5 Ft Lead. Best Match. Country of Origin (subject to change) : Taiwan, Province of China. Quick Links.
DAYTON 4HU80- Submersible Sewage Ejector Pump, 120VAC 1/2 HP, Cast Iron, 2” Flow - DAYTON 4HU80 1/2 HP,Sewage Ejector Pump,120VAC. These general purpose 110 to 120V sewage ejector pumps remove sewage containing solids from drains where a gravity system won't work, such as in septic systems that are below the main sewer line. They are compatible with most standard U.S. residential electrical wall outlets.New unused
Dayton 3BB77 1/2 HP 120VAC 32.0 Ft Max Head Submersible Sump Pump (D) - We have inspected this item and it powers on when plugged in but makes a humming noise. We do not believe it is functioning properly but we do not have the capability to test the unit any further. This unit shows signs of wear and appears to have been used before.
Dayton 4HU69 1/2 HP 3450 RPM 120VAC 30 Ft Max Head Submersible Sump Pump (D) - Sump Pit Dia. RPM 3,450 RPM. We have inspected this item and it powers on when plugged in but does not sound like it is functioning properly. It is making a humming noise. We do not have the capability to test the unit any further.
EBARA DWXU6.4S2 DOMINATOR Automatic Sewage Pump, 1/2 HP, 1 x 230 P/N 373000004 - Up for sale is a Brand New / Unused / Old Stock EBARA DWXU6.4S2 DOMINATOR Automatic Sewage Pump, 1/2 HP, 1 x 230 P/N 373000004. Please look at the pictures. Shipped with USPS Priority Mail Package or similar service. Location: A2-SI-30
New Flotec Fpzt7350 1/2 Hp 6000Gph Water Cannon Submersible Sump Pump - Uni Body Motor Housing, Eliminates Leak Points And Maximizes Pump Life. Corrosion Resistant Zinc Construction - Dissipates Heat Quickly And Extends Motor Life. Quadra Seal Technology - Provides Superior Motor Protection Over Single Seal Designs.
Dayton 3BB75 3/4 HP 120VAC 37.0 Ft Max Head Submersible Sump Pump (D) - We have inspected this item and we were unable to get it to power on when plugged in. We do not have the capability to test the unit any further. This unit shows signs of wear and appears to have been used before.
Dayton 3BB75 3/4 HP 120VAC 37.0 Ft Max Head Submersible Sump Pump - The maximum liquid temperature 104 degrees Fahrenheit, the duty cycle is continuous and the cord length is 15 feet. We have inspected this item and it powers on when plugged in. We do not have the capability to install the unit to test the unit any further.
Ozito 500W Vortex Submersible Sump Pump - Vortex impeller – Ideal for grey & dirty water transfer, sump draining, stormwater channels and drainage. Vortex Sump Pump. The spinning creates a vortex (similar to that found in a toilet bowl when it is flushed or a tornado).
New Flotec Fpzt7350 1/2 Hp 6000Gph Water Cannon Submersible Sump Pump 6732838 - MODEL FPZT7350. FLOTEC SUMP PUMP. Uni Body Motor Housing, Eliminates Leak Points And Maximizes Pump Life. Corrosion Resistant Zinc Construction - Dissipates Heat Quickly And Extends Motor Life. Quadra Seal Technology - Provides Superior Motor Protection Over Single Seal Designs.
DAYTON 1XHV4 Plug-In Utility Pump, 1/2 HP, 120VAC - They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.
PHCC PRO SERIES B-2200 Sump Pump Battery,140Ah,Requires Acid - PHCC PRO SERIES B-2200. They require filling with battery acid before installation. These batteries are designed to work with specific sump pump models. Sump Pump Battery,140Ah,Requires Acid. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
SUMP PUMP Industrial/Commercial - Cast Iron - 1/2 Hp - 115V - 1 Ph - 6,240 GPH - Flow Range: 3,300 GPH (55 GPM) to 6,240 GPH (104 GPM). Flow: 6,240 GPH (104 GPM). Features: Available in cast iron, bronze and stainless steel, stainless steel shaft, screen and float, carbon bearings, semi-open clog resistant impeller, TEFC motor, 8 Ft 16/3 pwer cord, designed to handle liquids with solids (see solids handling capability below) or dissolved solids and debris, Made in the USA.
SUMP PUMP Commercial/Industrial - Stainless Steel - 1/2 Hp - 115V - 6,240 GPH - Flow Range: 3,300 GPH (55 GPM) to 6,240 GPH (104 GPM). Flow: 6,240 GPH (104 GPM). Motor Horsepower Range: 1/3, 1/2 and 3/4 Hp. Horsepower: 1/2 Hp TEFC. Features: Available in cast iron, bronze and stainless steel, stainless steel shaft, screen and float, carbon bearings, semi-open clog resistant impeller, TEFC motor, 8 Ft 16/3 pwer cord, designed to handle liquids with solids (see solids handling capability below) or dissolved solids and debris, Made in the USA.
SUMP PUMP Commercial/Industrial - Stainless Steel - 1/3 Hp - 115V - 3,300 GPH - Flow Range: 3,300 GPH (55 GPM) to 6,240 GPH (104 GPM). Flow: 3,300 GPH (55 GPM). Motor Horsepower Range: 1/3, 1/2 and 3/4 Hp. Horsepower: 1/3 Hp TEFC. Features: Available in cast iron, bronze and stainless steel, stainless steel shaft, screen and float, carbon bearings, semi-open clog resistant impeller, TEFC motor, 8 Ft 16/3 pwer cord, designed to handle liquids with solids (see solids handling capability below) or dissolved solids and debris, Made in the USA.
SUMP PUMP Commercial/Industrial - Cast Iron - 1/2 Hp - 115V - 1 Ph - 6,240 GPH - Flow Range: 3,300 GPH (55 GPM) to 6,240 GPH (104 GPM). Flow: 6,240 GPH (104 GPM). Features: Available in cast iron, bronze and stainless steel, stainless steel shaft, screen and float, carbon bearings, semi-open clog resistant impeller, TEFC motor, 8 Ft 16/3 pwer cord, designed to handle liquids with solids (see solids handling capability below) or dissolved solids and debris, Made in the USA.
SUMP PUMP Commercial/Industrial - Cast Bronze - 1/3 Hp - 115V - 1 Ph - 3,300 GPH - Flow Range: 3,300 GPH (55 GPM) to 6,240 GPH (104 GPM). Flow: 3,300 GPH (55 GPM). Features: Available in cast iron, bronze and stainless steel, stainless steel shaft, screen and float, carbon bearings, semi-open clog resistant impeller, TEFC motor, 8 Ft 16/3 pwer cord, designed to handle liquids with solids (see solids handling capability below) or dissolved solids and debris, Made in the USA.
SUMP PUMP Commercial/Industrial - Stainless Steel - 3/4 Hp - 115V - 5,040 GPH - Flow Range: 3,300 GPH (55 GPM) to 6,240 GPH (104 GPM). Flow: 5,040 GPH (84 GPM). Motor Horsepower Range: 1/3, 1/2 and 3/4 Hp. Horsepower: 3/4 Hp TEFC. Features: Available in cast iron, bronze and stainless steel, stainless steel shaft, screen and float, carbon bearings, semi-open clog resistant impeller, TEFC motor, 8 Ft 16/3 pwer cord, designed to handle liquids with solids (see solids handling capability below) or dissolved solids and debris, Made in the USA.
SUMP PUMP Industrial/Commercial - Stainless Steel - 1/2 Hp - 115V - 3,900 GPH - Flow Range: 3,300 GPH (55 GPM) to 6,240 GPH (104 GPM). Flow: 3,900 GPH (65 GPM). Motor Horsepower Range: 1/3, 1/2 and 3/4 Hp. Horsepower: 1/2 Hp TEFC. Features: Available in cast iron, bronze and stainless steel, stainless steel shaft, screen and float, carbon bearings, semi-open clog resistant impeller, TEFC motor, 8 Ft 16/3 pwer cord, designed to handle liquids with solids (see solids handling capability below) or dissolved solids and debris, Made in the USA.
SUMP PUMP Commercial/Industrial - Stainless Steel - 1/2 Hp - 115V - 3,900 GPH - Flow Range: 3,300 GPH (55 GPM) to 6,240 GPH (104 GPM). Flow: 3,900 GPH (65 GPM). Motor Horsepower Range: 1/3, 1/2 and 3/4 Hp. Horsepower: 1/2 Hp TEFC. Features: Available in cast iron, bronze and stainless steel, stainless steel shaft, screen and float, carbon bearings, semi-open clog resistant impeller, TEFC motor, 8 Ft 16/3 pwer cord, designed to handle liquids with solids (see solids handling capability below) or dissolved solids and debris, Made in the USA.
SUMP PUMP Commercial/Industrial - Cast Iron - 1/3 Hp - 115V - 1 Ph - 3,300 GPH - Flow Range: 3,300 GPH (55 GPM) to 6,240 GPH (104 GPM). Flow: 3,300 GPH (55 GPM). Features: Available in cast iron, bronze and stainless steel, stainless steel shaft, screen and float, carbon bearings, semi-open clog resistant impeller, TEFC motor, 8 Ft 16/3 pwer cord, designed to handle liquids with solids (see solids handling capability below) or dissolved solids and debris, Made in the USA.
VINTAGE PENBERTHY MODEL No. 60B, 115 VAC, ALL BRASS SUMP PUMP WITH FLOAT SWITCH - VINTAGE PENBERTHY MODEL No. 60B, 115 VAC, ALL BRASS SUMP PUMP WITH FLOAT SWITCH. Condition is Used. Shipped with Standard Shipping.... please consider this pump is vintage it does work good.. condition is Used.... always try to ship the next business day and provide tracking information. If you leave a good feedback I would do the same soon as possible. Thanks for looking
DAYTON 3BB78 Submersible Sump Pump 1/3 HP Cast Iron 120V AC Diaphragm - Switch Actuation Diaphragm. Body Material Cast Iron. Impeller Material Cast Iron. Base Material Cast Iron. Flow Rate @ 5 Ft. of Head 65.0 gpm. Flow Rate @ 10 Ft. of Head 57.0 gpm. Flow Rate @ 15 Ft. of Head 45.0 gpm.
Liberty Model 260 1/6 hp Submersible Utility Pump - Lightweight, portable and weighing only 7.5 lbs., the model 260 is perfect for miscellaneous water removal from pool covers, flooded areas or other clear water transfer applications. Garden hose connection.
Liberty Pumps LE41A Submersible Automatic Sewage Pump 4/10 HP 115V & Tank Alarm - Solids-handling: 2". Featuring all cast iron construction with an epoxy powder coat finish, stainless steel fasteners, quick-disconnect power cord and a vortex style impeller for superior solids handling, the LE40-series combines solid performance with exceptional value.
Mo22 Sump Pump - PUMP, SUMP; 2HP, 460V,3 PH FOR MO22 AND TLO PIT.
Dayton 3BB75 3/4 HP 120VAC 37.0 Ft Max Head Submersible Sump Pump (D) - We have inspected this item and we were unable to get it to power on when plugged in. We do not have the capability to test the unit any further. This unit shows signs of wear and appears to have been used before.
Everbilt 1/3 Hp AC Motor Model SCN250-LQ - Make me an offer;Taken from a sump pump that was one month old. The impeller pump broke off the pump and the part was not available. The electric motor and switch were removed. Can easily repair your worn out motor or work great for some type of project. Works great, no noise and runs smooth. Weighs 10 pounds. Everbilt 1/3 Hp AC Motor Model SCN250-LQ. Condition is "Used". Shipped with USPS Priority Mail.
Outdoor/Indoor Tank Alarm High Water Alarm with 15 foot Mechanical Float Switch - The float switch is a normally open switch (pump down). Float Specs OBSERVER 500 SERIES INDOOR/OUTDOOR HIGH WATER ALARM. The Observer 500 Series high water alarm is designed for monitoring liquid levels in many applications including septic tanks, sump and sewage basins, aeration systems, cisterns, etc.
NOS - Dayton Submersible Sewage Pump - 2JGA4 - Item Sewage Ejector Pump. What you see in the photo is what you will be getting. RPM 3,450 RPM. Thermal Protection Yes. Duty Cycle Continuous. Head 25.0 ft. Liquid Temp. 130 Degrees F.
Dayton 4HDZ8 1/3 HP 3450 RPM 120VAC Tether Float Effluent Pump - Item Effluent Pump. Switch Actuation Tether Float. RPM 3,450 RPM. Duty Cycle Continuous. Flow Rate @ 10 Ft. of Head 68 gpm. Flow Rate @ 15 Ft. of Head 60 gpm. Flow Rate @ 20 Ft. of Head 43 gpm. Minimum Water Depth 18 in.
Goulds LSP0311AT 1/3HP Submersible Sump Pump 115V Piggyback Wide Angle Switch - Upper and lower heavy duty ball bearings construction. The shaft is hard coated 400 series stainless for improved corrosion resistance. The motor is permanently lubricated for extended service life and is powered for continuous operation.
Goulds A2N33U Pump And Control Switch 5 Amps - Pump switches are available with piggyback plugs and with bare leads. -16 AWG, SJOW cord is available with or without piggyback plug. -For non-potable water, water or sewage applications. -UL Recognized for use in water and sewage.
Goulds LSP0311A 1/3HP Submersible Sump Pump 1PH 115V Built-in Wide Angle Switch - Upper and lower heavy duty ball bearings construction. The shaft is hard coated 400 series stainless for improved corrosion resistance. The motor is permanently lubricated for extended service life and is powered for continuous operation.
Goulds A2D33 Wide Angle Pump Float Switch Bare, 13 Amps - Pump switches are available with piggyback plugs and with bare leads. -16 AWG, SJOW cord is available with or without piggyback plug. They are used to pump down or empty a tank. -For non-potable water, water or sewage applications.
Goulds GSP0311 Cast Iron Sump and Effluent Pump 1/3HP 115V Vertical Float Switch - The Goulds Water Technology GSP0311 Cast Iron Sump Pump is made of a cast iron body, and corrosion resistant fasteners. The motor on this pump is oil cooled, and permanently lubricated for extended service life and is powered for continuous operation.
Goulds GSP0511 Cast Iron Sump and Effluent Pump 1/2HP 115V Vertical Float Switch - The Goulds Water Technology Cast Iron Sump Pump is made of a cast iron body, and corrosion resistant fasteners. The motor on this pump is oil cooled, and permanently lubricated for extended service life and is powered for continuous operation.
Goulds LSP0311 1/3HP Submersible Sump Pump, Single Phase, 115V, Plug/No Switch - Upper and lower heavy duty ball bearings construction. The shaft is hard coated 400 series stainless for improved corrosion resistance. The motor is permanently lubricated for extended service life and is powered for continuous operation.
Goulds LSP0311F 1/3HP Submersible Sump Pump, Single Phase, 115V, Plug/No Switch - Upper and lower heavy duty ball bearings construction. The shaft is hard coated 400 series stainless for improved corrosion resistance. The motor is permanently lubricated for extended service life and is powered for continuous operation.
Tsurumi 4HF (100AB2.4S) 1/2hp, 115V, Submersible Pond & Waterfall Pump - Designed to pump maximum flow at low head applications. - Stainless steel Impeller for maximum durability and maintaining pump performance. - 304 Stainless steel body. - Oil Lifter provides lubrication of the seal faces.
Tsurumi Pump Lb-800 Submersible Dewatering Pump 115v 2" bore - Was reburbished with seals and propeller 2 years ago and stored away not been used. Tsurumi Pump Lb-800 Submersible Dewatering Pump. Condition is Remanufactured. Shipped with USPS Parcel Select Ground.
Dayton 3BB88 Submersible Sewage Pump 1/2 HP Automatic Tether Switch 2 in inch - Switch Type. Get your genuine high end part for much cheaper here. BETTER BUILT! GPM of Water @ 5 Ft. of Head. GPM of Water @ 10 Ft. of Head. Get the best price ANYWHERE HERE! Top Material. This is the CHEAPEST price ANYWHERE on a genuine part.
Ashland 1/2 H.P. Effluent Pump - Ashland 1/2 H.P. Effluent Pump. Condition is New. Shipped with USPS Parcel Select Ground.
DAYTON 3BB69 SUBMERSIBLE PUMP 0.5HP, 3450RPM, 120V, 60Hz, PH: 1 - Local Pickup After we receive the item back at our facility, we will confirm that the item is indeed ours and defective. After we make our confirmations then we will replace the defective item with an equivalent item.
DAYTON 2 HP Manual Submersible Sewage Pump, 460 Voltage - Pump Type Manual. Pump Body Material Cast Iron. GPM of Water @ 20 Ft. of Head 165. GPM of Water @ 25 Ft. of Head 155. GPM of Water @ 30 Ft. of Head 140. GPM of Water @ 40 Ft. of Head 120. GPM of Water @ 50 Ft. of Head 95.
Heavy Duty 2-Part Radon Mitigation Sump Cover + Accessories - A hole saw can be used to modify this cover if needed. This will allow these pipes to remain stationary when the pump needs to be serviced. 28" wide stationary base plate is designed to be sealed permanently to the floor.
Wayne Submersible Sump Pump 115-Volts 8-Ft. Cast Iron Vertical Float Switch - Wayne 1/3 HP Cast Iron Submersible Sump Pump with Vertical Float Switch Item Description Wayne's CDU790 features a durable cast iron base and epoxy-coated housing for long life and quiet operation. This submersible pump is designed for 11 in. or larger sump pits. The CDU series is one of the most popular replacement pumps in America. The ceramic mechanical seal assures long life in the most demanding applications and the 1-1/2 in. discharge allows easy installation plus maximum flow. ---Submersible cast iron and coated steel sump pump with vertical float switch ---Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit ---Epoxy-coated steel motor housing and rugged, cast iron pump base ---Fully submersible ---1/3 HP; max. flow rate is 3800 GPH; 2700 GPH at 10 ft. of discharge lift ---1-1/2 in.
WAYNE SPF33 Thermoplastic Submersible Sump Pump With Vertical Float Switch - Part Number: SPF33. This product is assembled in the USA. Easy installation and easy handling. Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and corrosion resistant, thermoplastic pump base.
Dayton 3Bb93 Manual Submersible Sewage Pump, 1 Hp, 240 Volt, New! - Pump Type Manual. Pump Body Material Cast Iron. GPM of Water @ 20 Ft. of Head 135. GPM of Water @ 25 Ft. of Head 117. GPM of Water @ 30 Ft. of Head 100. GPM of Water @ 40 Ft. of Head 70. GPM of Water @ 50 Ft. of Head 17.
DuroMax XP650WP 208cc 220-Gpm 3" Gasoline Engine Portable Water Pump - It is capable of moving 220 Gallons Per Minute. It has a wide variety of uses from draining a backyard pool in minutes to steadily working to lower reservoir levels. The XP650WP also has a Cast-Iron Impeller and Volute for maximum life and durability.
Indoor Outdoor Sump Pump Alarm Well Overflow Power Failure AC or DC - Applications Include: Septic Systems - Outdoor Sump Pump Alarm / Crawl Space Pump Failure - Outdoor Sump Pump Monitor / Septic Pump Failure Alarm - Swimming Pool Sump Pump Monitor / Sump Pump Alarm System - 120 Volt Sump Pump Failure Alarm / Sump Pump Failure Warning - Sump Pump Alert.
ABS Sump Cover with Installed Inspection Port 21" - Easily inspect your sump pump with this sump cover that has an installed screw off inspection port. Port is installed about 2" from the edge of the cover. The cover can be cut to fit the size of the sump crock.
ABS Sump Cover with Installed Inspection Port 23.5" - Easily inspect your sump pump with this sump cover that has an installed screw off inspection port. Port is installed about 2" from the edge of the cover. The cover can be cut to fit the size of the sump crock.
Sump Cover Inspection Port 4" White - This inspection port has a single non-jamming (no cross thread), self-cleaning buttress thread and self centering lid combine for a fluid tight seal without cross threading. Clear inspection window in port.
Hazleton Weir 250 GPM 4" Twin Volute VS Vertical Sump Pump - NOS - Unused and ready for your use. 4" twin volute pump About 105" from the bottom of the deck to the bottom of the pump. About 133" tall, overall The buyer is responsible for arranging shipping on this item or for picking it up. Or if you want us to quote and arrange, we can provide that for a modest service fee. If you are arranging freight, we will need a Bill of Lading from your common carrier. Pick-up location has a forklift.
Liberty Pumps 283 - 1/2 HP Submersible Sump Pump w/ Piggyback Float - Cast Iron - With a shut-off head of 37 feet and 3/4" solids-handling capability, the 283 byLiberty covers a wide-range of low-head to mid-range pump applications. Designed withLiberty's unique one-piece cast iron body and quick-disconnect cords available in 10' and 25' lengths.
Monarch Industries Submersible 1/3 Hp Sewage Pump Ws30A/620030 Nib - We apologize in advance for any inconvenience this may cause you. JOBCODE SM42716 . The color of the photo may vary from the actual product due to translation and reproduction limitations of photography.
DAYTON 4HU73 1/2 HP Submersible Effluent Pump ,1/2 HP New in Box 120VAC 1.5" Dia - Solids 3/4", GPM of Water @ 5 Ft. of Head 90, GPM of Water @ 10 Ft. of Head 78, GPM of Water @ 20 Ft. of Head 52, Max. Head 31 ft., Off Point 4-1/4", On Point 13-1/4", GPM of Water @ 15 Ft. of Head 65, GPM of Water @ 25 Ft. of Head 35, GPM of Water @ 30 Ft. of Head 10, Max.
3/8" Submersible Sump Pump - 0.33HP, 115V, 2.9 Amps, Plug, No Switch - This lightweight, portable sump pump is made with corrosion resistant stainless steel motor casing and fasteners. Upper and lower heavy duty ball bearing construction for long life. Handles solids up to 3/8".
2 HP, 1750 RPM, 230V, 16 Amps - Submersible Sewage Pump 2-1/2" - Sewage pump is made with heavy duty cast iron casing. Handles solids up to 2-1/2". 300 series stainless steel keyed design. 300 series stainless steel fasteners. High grade turbine oil surrounds motor for efficient heat dissipation.
3 HP, 1750 RPM, 230V, 21.5 Amps - Submersible Sewage Pump 2-1/2" - Sewage pump is made with heavy duty cast iron casing. Handles solids up to 2-1/2". 300 series stainless steel keyed design. 300 series stainless steel fasteners. High grade turbine oil surrounds motor for efficient heat dissipation.
460V - 3 HP, 1750 RPM, 470 GPM - 6 Amps - Submersible Sewage Pump 2-1/2" - 60H - Sewage pump is made with heavy duty cast iron casing. Handles solids up to 2-1/2". 300 series stainless steel keyed design. 300 series stainless steel fasteners. High grade turbine oil surrounds motor for efficient heat dissipation.
5 HP, 1750 RPM, 230V, 16.4 Amps - Submersible Sewage Pump 2-1/2" - Sewage pump is made with heavy duty cast iron casing. Handles solids up to 2-1/2". 300 series stainless steel keyed design. 300 series stainless steel fasteners. High grade turbine oil surrounds motor for efficient heat dissipation.
60 Hertz 5 HP, 1750 RPM, 230V, 26.5 Amps - Submersible Sewage Pump 2-1/2" - Sewage pump is made with heavy duty cast iron casing. Handles solids up to 2-1/2". 300 series stainless steel keyed design. 300 series stainless steel fasteners. High grade turbine oil surrounds motor for efficient heat dissipation.
2-1/2" Submersible Sewage Pump 470 GPM - 5 HP - 1750 RPM - 460V, 8.2 Amps - Sewage pump is made with heavy duty cast iron casing. Handles solids up to 2-1/2". 300 series stainless steel keyed design. 300 series stainless steel fasteners. High grade turbine oil surrounds motor for efficient heat dissipation.
60 Hertz - 3" Submersible Sewage Pump - 2HP, 1750 RPM, 230V, 11.6 Amps - This sewage pump is made with heavy duty cast iron casing. Sewage pump is compatible with A10-40 guide rail assembly or base elbow rail systems. Handles solids up to 3". 300 series stainless steel keyed design.
Heavy Duty Submersible Sewage Water Drainage Sump Pump - Industrial Grade - Draining for all sewage waste water needs. It is mainly use as Septic Tanks;. Industrial Grade Sump Pump which suitable dewatering in industrial, mining and architectural operations ;. Stainless Steel Motor Housing & Heavy Duty Cast iron Base for durability;.
1HP Sewage Pump 4400GPH 110V Stainless Steel Submersible Water Pump Sump 30FT - Shaft with rotor: AISI 416 stainless steel. Max height Lift: 4400 GPH (20 m3/H ). max lift: 39 ft (12m). Pump body: Cast iron. WARNING: Many food and beverage cans have linings containing bisphenol A (BPA), a chemical known to the State of California to cause harm to the female reproductive system.