DRL Controller Auto Car LED Daytime Running Lights Relay Harness Dimmer On/O-VF

Relay Harness Dimmer On/Off 12-18V Fog Light Controller DRL Controller Auto Car LED Daytime Running Lights Controller Car Lights Product description:  Product voltage: 12-18V Working current: 3A Product size: microminiature 1.7 * 2.1 * 3.9CM Weight: 31.2G   Product features: The product is mini and light. waterproof. Suitable for all models. With dimming delay function! ! Smart LED Daytime Running Light Eagle Eye Light Controller Steady light + dimming + delay + automatic switch When the car is started (the voltage must be higher than 13V +), the daytime running lights automatically turn on, when the headlights (or reading lights) are turned on, the daytime running lights are dimmed (dimmed), when the car is turned off (the voltage must be less than 12.5V ), The daytime running lights are turned off after a delay of 15 seconds!   Warm reminder: Just after connecting the battery, it is normal for the daytime running lights to turn on for about 15 seconds and then turn off the lights (realizing the delay function). After that, it is necessary to start the car and start working when the voltage reaches 13V +! The scope of products 1. The starting voltage is 13V +, and the flameout voltage is lower than 12.5V (if it is higher than this value, it will be extended for a few minutes and the light will not turn off until the voltage drops) 2. The total power of a pair of daytime running lights does not exceed 18W (the total power of most daytime running lights will not exceed)   Wiring: 1. First connect the positive and negative poles of the daytime running lights on the left and right sides 2. Connect the red wire and black wire of the input end with the fuse on the controller to the positive and negative poles of the battery, and the red wire and black wire of the output end to the positive and negative poles of the daytime running light 3. Connect the yellow line on the controller to the positive switch of the headlight (or reading light). When the headlight (or reading light) is turned on, the brightness of the daytime running light will be halved (dimmed) to achieve the dimming function (yellow line) You can choose not to connect, that is to give up this function, does not affect other uses)
Work smart: When the car engine is started, the voltage reaches 13V +, and the daytime running lights automatically turn on. When the car is turned off, the voltage is less than 12.5V (not suitable for cars with a voltage higher than 12.5V after the flameout). The daytime running lights will automatically turn off after a delay of 15 seconds. Lights, easy to illuminate the owner to go home, to achieve delayed light-off function!
Package List:  1 x Daytime Running Lights Controller
Note:  After the battery is connected, the daytime running light will turn on for about 15 seconds and then turn off the light. This is a normal phenomenon (realizing the delay function). After that, you need to start the car. When the voltage reaches 13V+, it will start working!