Inkbird Temperature and Humidity Controller ITC-608T Pre-wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage, 1800w, ETL listed (With Temperature and Humidity Sensor)
Bullet point
1. US ETL Certificate Listed and Warranty.
ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for QUALITY control and SAFETY. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)
2.Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output.
ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment . Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
3. Supporting calibration, compressor delay and saving reset setting values.
Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
4. More power up to 1800W.
Temperature control range is -40-212°F(-40-100 °C ), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
5. Multifunction usage.
Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
Please note:
If you want to control the temperature and humidity at the same time, please choose the item with temperature sensor and humidity sensor
Main features:
* Plug and play design, easy to use, can control temperature and humidity at the same time
* Dual relay output, can connect with refrigeration and heating equipment at the same time ; can connect with humidifier and dehumidifier equipment at the same time ;
can connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time
* Support reading with Centigrade or Fahrenheit unit
* Maximum output load: 1800W (120V, 15A)
* Dual display window, be able to display measured temperature/humidity and set temperature/humidity at the same time
* Supporting Temperature and humidity calibration
* Compressor delay protection for refrigeration control
* High and low temperature/humidity alarms are available
* Over-temperature/humidity and sensor fault alarm
* Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity control
* Support setting 12 different temperatures in 12 different time period
Specification
Maximum output load: 120Vac, 60Hz, 15A, 1800W
Temperature measurement range : -40- 100 °C /-40 °F -212 °F
Temperature display accuracy: 0.1 °C / °F (<100 °C / °F )
Relative humidity measurement range: 5~99%RH
Humidity display accuracy: 0.1%RH
Display unit : temperature: Celsius °C or Fahrenheit °F ; humidity : %RH
Ambient temperature: -20 °C to 60 °C or -4 °F to 140 °F
Storage environment : temperature: 0 °C- 60 °C or 32 °F -140 °F ; humidity : 20~80%RH(Unfrozen or condensation state )
Temperature sensor cable Length: 2m ( 78.74in )
Humidity sensor cable Length: 2m ( 78.74in
Input Power Cable Length: 1.5m ( 59.05in )
Unit Dimension: 20.8cm*8.5cm*3.5cm ( 8.19*3.35*1.38in )
Warranty:
2 year for the ITC-608T
1 year for the sensor
Package Content:
1x ITC-608T temperature and humidity controller;
1x Temperature sensor (depending on your purchased sensor)
1x humidity sensor (depending on your purchased sensor)
1x Manual
Shipping Policy Payment Method Returns Policy
Copyright©2017 DataCaciques
Inkbird ITC-608T+(Temp.Humid Sensor)SAFE & RELIABLE:
Inkbird ITC-608T+(Dual Temp.Sensors)
SAFE & RELIABLE:
MULTI-PURPOSE & CONVENIENT DESIGN: