TotalBoat TotalProtect Epoxy Barrier Coat System White Quart

$92.08 Buy It Now, Click to see shipping cost, 30-Day Returns, eBay Money Back Guarantee
Seller: sellsim_2day_shipping ✉️ (198,082) 96.4%, Location: Miami, Florida, US, Ships to: US & many other countries, Item: 224444052541 TotalBoat TotalProtect Epoxy Barrier Coat System White Quart.

TotalBoat TotalProtect Epoxy Barrier Coat System
  • High-build two part epoxy primer and barrier coat for use above and below the waterline
  • Excellent for gelcoat blister prevention and repair work on fiberglass boats
  • Provides superior corrosion protection on all underwater metals
  • Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat.
  • Available in your choice of White or Gray in Quart or Gallon size kits. Coverage: 225 sq. ft. per gallon (at 7 mils wet, not accounting for waste)

Total Protection for Gelcoat, Fiberglass, & Metals—Above & Below the Waterline. TotalBoat TotalProtect Epoxy Barrier Coat and Primer forms a waterproof barrier to protect against osmotic blistering and corrosion. Read more TotalProtect Epoxy Barrier Coat System Kits Provide Greater Value for the Same High-Quality Barrier Coat Performance as More Expensive Marine Epoxy Primers. High-Build, Flexible Epoxy Barrier Coat Prevents Water Absorption and Migration from Causing Costly Damage to Fiberglass/Gelcoat Hulls, Keels, Props, and Other Underwater Metals. A barrier coat is recommended on fiberglass boats as a watertight primer applied before application of antifouling bottom paint. TotalBoat TotalProtect is a heavy- duty, epoxy-based barrier coat and primer preferred by professionals to prevent water intrusion from creating blisters in gelcoat & fiberglass. It also acts as a tie-coat to help any coatings applied over it adhere as strongly as possible. Its anti-corrosive properties prevent underwater metals from deteriorating. Compatible with all paints. For maximum adhesion, recoat or overcoat when the surface is thumbprint tacky. Overcoating times vary based on temperature & humidity. The "thumbprint test" lets you know when to begin overcoating. For this simple test, press your thumb gently into the primer. If you leave a thumbprint, but don't see paint on your thumb, TotalProtect is ready to overcoat. To begin, apply the first coat of TotalProtect. After 45 minutes, do the thumbprint test. If not ready, check again every 15 minutes. The Number of Coats Needed Depends on How You Apply TotalProtect. To Create a Watertight Barrier, it Takes a Minimum of 10 Mils Dry Film Thickness (DFT). Beware of competing products claiming to create an effective barrier coat with just 2 coats, as all application methods do not lay down the barrier coat at the same mil thickness per coat. Sprayer type, brush type, & roller cover thickness all make a difference in mil thickness per coat. Regardless of application method 8-12 mils DFT is key. Easy to Apply by Brushing, Rolling, or Spraying Apply TotalProtect with a brush (natural bristle), roller (3/16" nap or foam solvent-safe roller cover is best), or spray gun (airless, conventional, or HVLP). Mil thickness/number of coats for rolling depends on the roller cover: 4-5 coats (3/16" roller)3-4 coats (1/4" roller)2-3 coats (3/8" roller) Thin up to 10% (max) with TotalBoat Epoxy Primer Thinner 200. TotalProtect Epoxy Barrier Coat System Features Compare to Interlux InterProtect 2000 & HS, Pettit Protect, and Sea Hawk Tuff Stuff. Universal, epoxy barrier coat and no-sand primer features high film build for maximum protection. Great for preventing or repairing gelcoat blister damage. Anti- corrosive properties protect metals. Excellent adhesion to properly prepared fiberglass, steel, stainless steel, lead, bronze, cast iron. Easy to mix at a 3:1 ratio by volume. Easy to apply by brushing, rolling, or spraying. Comes in White and Gray colors, ideal for alternating coats to indicate where you've already primed. Quart Kit: (3/4 qt. Base + 1/2 pt. Activator) Gallon Kit: (3/4 gal. Base + 1 qt. Activator) Read more TotalBoat TotalProtect Epoxy Barrier Coat System Protects Against Corrosion Prevents Osmotic Blistering Creates a Stable Surface for Coatings Read more TotalBoat TotalProtect Epoxy Barrier Coat Primer TotalBoat Aluminum Boat Barrier Coat TotalBoat 2-Part Surfacing and High-Build Epoxy Primers TotalBoat Premium Topside Primer Uses for TotalBoat primers Universal high-build epoxy primer & barrier coat. Use as a water-tight moisture barrier to protect aluminum hulls & pontoons from corrosion, fill small imperfections & ensure a solid foundation for antifouling paints or 1 & 2-part topside finishes. Provides excellent finish adhesion & corrosion protection on fiberglass, steel, wood & aluminum. Premium marine undercoat compatible with one-and two-part topside finishes. Resin Type / Mix Ratio / Induction time Epoxy resin / 3:1 mix ratio / Induct for 20 minutes prior to reduction and application. Epoxy resin / 3:1 mix ratio / Induct for 20 minutes prior to reduction and application. Epoxy resin / 1:1 mix ratio / Induct 30 minutes before reduction or application. Phenolic modified short oil alkyd resin (no mix ratio, no induction period. Compatible Substrates Fiberglass, metals, wood, previously painted surfaces in good condition (not 1-part paints) Aluminum, metals, fiberglass, previously painted surfaces in good condition (epoxy products only) 2-Part High Build & Surfacing Epoxy Primers: Fiberglass, wood, aluminum, steel, and previously painted surfaces in good condition. 2-Part Clear Epoxy Primer: Fiberglass, carbon fiber, Kevlar, and previously painted surfaces in good condition. Fiberglass, wood, and previously painted surfaces in good condition. Application Temperature / RH 50-95°F / 0-85% RH 50-95°F / 0-85% RH 45-125°F 50-90°F / 0-90% RH Application Methods Brush, roll, or spray Brush, roll, or spray Brush, roll, or spray Brush, roll, or spray Thinner / Reducer TotalBoat Epoxy Primer Thinner 200 TotalBoat Special Brushing Thinner 100 TotalBoat 2-Part Epoxy Primer Reducer Brush/Roll Application: TotalBoat Special Brushing Thinner 100. Spray Application: Xylene Recommended Number of Coats 2-3 (minimum), using a 3/8" roller; 3-4, using a 1/4" roller; 4-5, using a 3/16" roller. It's more important to ensure 8-12 mils of dry film thickness than number of coats. More than 3 coats may be required based upon the application thickness. 4-5 1-3 1-2 Overcoat With... TotalBoat TotalProtect or TotalBoat Antifouling Bottom Paints, including Krypton, JD Select, and Spartan. TotalBoat Aluminum Boat Barrier Coat, TotalBoat AlumiPaint AF Antifouling Bottom Paint, or TotalBoat Outdrive AF 2-part polyurethane topcoats. Polyurethane or enamel topside paints, such as TotalBoat Wet Edge Topside Paint and TotalBoat TotalTread. Colors / Sizes / Coverage White, Gray / Quart Kit (3/4 qt. Base + 1/2 pt. Activator), Gallon Kit (3/4 gal. Base + 1 qt. Activator) / Yield: 225 sq. ft. (at 7 mils wet, not accounting for waste). Gray / Quart Kit (3/4 qt. Base + 1/2 pt. Activator), Gallon Kit (3/4 gal. Base + 1 qt. Activator) / Yield: 400 sq. ft./gal. @ 2 mils dry (not accounting for waste). Containers will not come filled completely. White, Gray, Clear / Quart Kit, Gallon Kit / Surfacing Primer: 400 sq. ft./gallon @ 2 mils dry; High-Build Primer: 75-100 sq. ft./gallon @ 3 mils dry; Clear Primer: 175-200 sq. ft./gallon @ 3 mils dry White, Gray / Quart, Gallon / 250-300 sq. ft./gallon Above / Below Waterline Use above and below the waterline. Use above and below the waterline. Use above and below the waterline. Use above the waterline only. It all started simply enough. As boaters, we wanted better stuff for our own boats. Even our favorite products, the ones we'd come to rely on, had room for improvement. It'd be nice if they could hold up longer, cure faster, coat better, apply easier, and—since we all know boat ownership creates a mini maelstrom in your pocket—cost less. So we took everything we knew from 35 years of customer feedback, combined that with our own boating knowledge, and after a few years of rigorous R&D, TotalBoat was born. Launched, rather. By boaters, for boaters. Need help? Our TotalBoat Tech Team is a bunch of boat owners who really know their stuff. So whether you're trying to figure out what to buy or what's the best solution for your particular project, they have years of hands-on training and experience—and a passion to help you succeed. Read more

  • Condition: New
  • EAN: 0811932021700
  • MPN: 487739
  • Brand: TotalBoat
  • UPC: 811932021700
  • Color: White
  • Size: Quart

PicClick Insights - TotalBoat TotalProtect Epoxy Barrier Coat System White Quart PicClick Exclusive

  •  Popularity - 12 watchers, 0.0 new watchers per day, 1,055 days for sale on eBay. Super high amount watching. 17 sold, 30 available.
  •  Best Price -
  •  Seller - 198,082+ items sold. 3.6% negative feedback. Good seller with good positive feedback and good amount of ratings.

People Also Loved PicClick Exclusive