Fan Switch Kit (Gauge Style) Radiator Cooling (PART #0500) (Davies Craig)

DIGITAL FAN SWITCH KIT (GAUGE style) Radiator Cooling (PART NO #0500)

A bright, attractive, compact high visibility 52mm round gauge with LED digital display for mounting in the driver’s compartment!

Automatically activates single or twin fans or a fan and Electric Water Pump at your set / targeted temperature when extra cooling is required. It c an also detect transmission fluid temperature.

It senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section or alternatively the sensor can also be placed directly into the coolant system in combination with a Temperature Sensor Adaptor Kit (Part 0409).

24 Volt Application

Kit sold in 12-volt configuration, for 24-volt application, you will need to purchase 2 x 24-volt relays.

Simply search for part 10534 in our store.

 

KIT CONTENTS
DESCRIPTION	UNITS
Digital Thermatic Fan Switch - 52mm Gauge	1
Digital Gauge Stand	1
Digital Gauge Thermatic Fan Switch - Wiring Loom	1
Fan Wiring Harness	2
Fuse 15 AMP	2
Fuse 30 AMP	2
Red Wire Joiner	2
Blue Wire Joiner	2
Relay - 12V 40 Amp 5 Pin	2
Blue 6mm Ring Terminal	2
Red 6mm Ring Terminal	3
Screw - Self Tapping 8X3/8	3
Temperature Probe Mounting Kit	1
Installation Instructions	1

AIR TEMPERATURE APPLICATION

The kit is set up for air temperature sensor application. For water / coolant applications, please read below.

It senses air temperature as it passes through the radiator and has an adjustable temperature range of 5ºC to 110ºC (41ºF to 230ºF). 
The Temperature Sensor is placed in the radiator fin section as close to the hot coolant inlet as possible, no need to cut hoses or can be placed directly into the coolant system.

WATER / COOLANT APPLICATION
Part #0500 sensor can also be placed directly into the coolant system. 

• Use #0465  for OE style 1/4 “NPT port install
• Use #0409  for radiator hose install

 

The DIGITAL GAUGE THERMATIC® FAN/EWP® SWITCH must be mounted inside the vehicle’s driving compartment for easy reading and quick adjustment.

• Convenient push-button control allows you to accurately set/target temperature for automatic activation of the Thermatic® Fan #1 and Fan #2 at independent temperatures when extra cooling is required.
• Simple, do-it-yourself installation instructions.
• This flexible switch can also be used to activate an Electric Water Pump and/or an Electric Booster Pump.

This new DIGITAL GAUGE THERMATIC® FAN/EWP® SWITCH complements the highly successful #0400 Combo, #0401, #0404 and #0444 Thermatic® Switches

 

FEATURES

• Temperature Sensor Display Range 0o C ~ 130o C (32F ~ 266F)
• Temperature Sensor Setting Range 5o C ~ 110o C (41F ~ 230F)
• Temperature Units interchangeable between o C & o F
• 12V and *24V compatible
• *For 24 Volt application: 2 x 24V Relays required, sold separately (Part #10534)
• Can detect ambient temperature (air) as standard
• Can detect coolant temperature
  • Use #0465 for OE style 1/4 “NPT port install
  • Use #0409 for radiator hose install
• Can detect transmission fluid temperature
  • Use #0465 and requires (sourced externally)
    • 1 x Female Fitting Pipe Tee 1/4' NPT
    • 2 X 3/8' Barb Fitting To 1/4' NPT
• Independent set temperature for Fan 1 and Fan 2
• Independent control of A/C override (fan 1, fan 2 or both)
  • Can be used as manual override
• Can Manually turn off Fans (press and hold Fan + A/C)
  • For river crossing as example
• Led indicators for Fan1, Fan2 and A/C
  • LED lights show operating condition
  • See table below
• Over temperature warning with audible alarm
  • See functions table below
• Audible alarm has 5min Snooze function.
• Universal 52mm gauge design.
• Built in display dimmer with headlight trigger
• Extra-long temperature sensor wires 380 cm
• Interchangeable/replicable sensor

 

Specs	Part #0401	Part #0444 & 0445	Part #0500	Part #8002
Operating Voltage	12 & 24 Volt	12 Volt standard 24 Volt relays required	12 Volt standard 24 Volt relays required	12 & 24 Volt
Maximum Current	20 Amps	40 Amps	40 Amps or relay rating	12 Amps EWP®  Only
Single Fan Control	YES	YES	YES	YES
Duel Fan Control	Wiring Dependant	YES	YES	Wiring Dependant
EWP®  control	ON / OFF ONLY (USE 8002)	ON / OFF ONLY (USE 8002)	ON / OFF ONLY (USE 8002)	YES
EBP control	YES	YES	YES	NO
EWP® /EBP and Fan control	Wiring Dependant	YES	YES	EWP and Fans only
Single Fan/EWP® /EBP Application	All DCPL Fans, EWP®  & EBPs	All DCPL Fans, EWP®  & EBPs	All DCPL Fans, EWP®  & EBPs	All DCPL Fans & EWP®
Duel Fan Application	Relay Switching Current MAX 15A	All Fans (MAX 30A Each)	All Fans	All Fans (Wiring Dependant)
Speed	Single Speed	Single Speed	Single Speed	Single speed Fan & Variable EWP®
AC Override	Wiring Dependant ( use 0404)	YES	YES  Selectable Fan Override	NO
Sensor Wire Length	110cm	142cm in total (Wire from switch 112cm plus sensor connector 30cm)	380cm	250cm Increase to 380cm (Oct 2020)
Coolant Temperature Detection	YES	YES (0444 Requires #0409 or #0465) (0445 comes with 1/4" NPT Thermal Sensor)	YES  (Requires #0409 or #0465)	YES
Duel Fan Start-Up Delay	NO	10 Seconds	Independent set Temp	NO
Temperature Setting Range	40°C To 100°C (104°F To 212°F)	40°C To 110°C (104°F To 230°F)	5°C To 110°C (41°F To 230°F)	40°C To 110°C (104°F To 230°F)
Temperature Setting Method	Turn Knob	Push Button	Push Button	Push Button
Mounting position	Engine bay	Engine bay	Vehicle Cabin	Vehicle Cabin
Dimensions	35mm x 58mm x 45mm	95mm x 65mm x 56mm	Universal 52mm Gauge	98mm x 95mm x 25mm
IP66 Rated	NO	YES	NO	NO
Temperature Display	NO	YES	YES	YES
Set Temperature Display	NO	YES	YES	YES
Fan Operation Indicator	NO	NO	YES	EWP®  and Fan
Temperature Set Indicator	NO	NO	YES	YES
Fault Display	NO	NO	YES	YES
°C Setting	NO	YES	YES	YES
°F Setting	NO	YES	YES	YES
°C D °F Change	NO	YES	YES	YES
Air Temperature Detection	NO	YES	YES	NO
Accessories	Part #1000, 1001, 1002, 1003	Part #1000, 1001, 1002, 1003	Part #1000, 1001, 1002, 1003	Part #1000, 1001, 1002, 1003
	Part #0400 (#0401 + #0409)	Part #0409	Part #0409, #0465, #10534	Thermatic®  Fan
	Part #0422 (Duel Fan Only)	Part #0422 (Duel Fan Only)	Part #0422 (Duel Fan Only)	EWP®  Header Adaptor Kit
				EWP®  Digital Controller Combo

 

 

OPTIONAL PARTS   (SOLD SEPARATELY)

¼ NPT THERMAL SENSOR ADAPTOR KIT SUITS #0444, 0500, 8001 (PART #0465)

The Davies, Craig ¼" NPT Thermal Sensor Adaptor Kit is designed to fit a ¼ NPT Sensor to Part Number 0444 or 0500 (Digital Thermatic® Fan Switch or Gauge).

This will enable you to change the sensor type and fitment options from the 5mm  diameter probe sensor provided in these kits as standard.

THERMAL SENSOR PROBE (PART #10460)