|
|
|
|
|
|
|
|
|
|
|
The Following Items Are Included:
- Fluke 725Ex Intrinsically Safe Multi-function Process Calibrator (BC# 24900)
- (2) Fluke Banana To Alligator Clips Cables
- (2) Fluke Flexible Test Leads
- User Manual On CD-ROM
- Carrying Case
|
|
|
|
|
|
|
|
|
|
|
|
|
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
|
This Item Has A Current Calibration! |
|
|
Fluke 725Ex Intrinsically Safe Multi-function Process Calibrator
Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
Two channel simultaneous source and measure capability for calibration of transmitters
Power transmitters with internal loop supply
Includes Carrying Case & Accessories As Listed Above!
Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange Warranty
The Simply Powerful Intrinsic Safe Calibration Tool
The new 725Ex Intrinsically Safe Multi-function Process Calibrator is powerful yet easy-to-use. Combined with one of the (8) new Fluke-700PEx pressure modules, the 725Ex is able to calibrate almost any process instrument likely to need service in an area where explosive gasses may be present.
Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.
Do you need to calibrate transmitters? The 725Ex split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. The 725Ex has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.
From the moment you pick it up, the Fluke 725Ex is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do.
Features:
Use the measure and source functions to test and calibrate almost any process parameter. The Fluke 725Ex Intrinsically Safe Calibrator is a powerful, multi-function calibration solution that offers:
- ATEX II 1 G Ex ia IIB 171°C KEMA 04ATEX 1303X
- I.S. Class I, Division 1 Groups B-D, 171°C compliance
- Measure Volts dc, mA, RTDs, thermocouples, frequency and ohms
- Source or simulate Volts dc, mA, RTDs, thermocouples, frequency and ohms
- Two channel simultaneous source and measure capability for calibration of transmitters
- Power transmitters with internal loop supply
- Store frequently-used test setups for later use
- Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
- Pressure switch test function to capture set, reset and deadband values
- Compact size and weight
- Simple, push-button user interface
- Rugged and reliable, for field use
Specifications:
Measurement Accuracy |
Voltage DC |
30.000 V |
0.02%+ 2 counts (upper display) |
10.000 V |
0.02%+ 2 counts (lower display) |
90.00 mV |
0.02%+ 2 counts |
-10.00 mV to 75.00 mV |
0.025 % + 1 count (via TC connector) | |
Current DC |
24.000 mA |
0.02%+ 2 counts | |
Resistance |
0.0 to 400.0 Ω |
0.1Ω (4-wire), 0.15Ω (2- and 3-wire) |
401 to 1500 Ω |
0.5Ω (4-wire), 1Ω (2- and 3-wire) |
1500 to 3200 Ω |
1Ω (4-wire), 1.5Ω (2- and 3-wire) | |
Frequency |
2.0 to 1000.0 CPM |
0.05 % + 1 count |
1.0 to 1100.0 Hz |
0.05 % + 1 count |
1.00 to 10.00 kHz |
0.05 % + 1 count |
Sensitivity |
1 V peak-to-peak-minimum | |
Pressure |
Accuracy |
from 0.025% of range using any of 8 intrinsic safe pressure modules. |
|
(for detailed specifications refer to pressure modules in options and accessories) |
|
Modules available for differential, gage, vacuum, absolute, dual and high pressure. | |
Source Accuracy |
Voltage DC |
100.00 mV |
0.02%+2 counts |
10.000 V |
0.02%+2 counts |
-10.00 mV to 75.00 mV |
0.025 % + 1 count (via TC connector) | |
Current DC |
24.000 mA (Source) |
0.02%+ 2 counts |
24.000 mA (Simulate) |
0.02%+ 2 counts | |
Resistance |
15.0 to 400.0 Ω |
0.15 Ω (exc. current 0.15 to 0.5 mA), 0.1 Ω (exc. current 0.5 to 2 mA) |
401 to 1500 Ω |
0.5 Ω(excitation current 0.05 to 0.8 mA) |
1500 to 3200 Ω |
1 Ω(excitation current 0.05 to 0.4 mA) | |
Frequency |
2.0 to 1000.0 CPM |
0.05% |
1.0 to 1100.0 Hz |
0.05% |
1.00 to 10.00 kHz |
0.25% |
Waveform: |
5 V p-p squarewave, -0.1 V offset | |
RTDs and Thermocouples |
Measure Accuracy: |
NI-120 |
0.2 °C |
PT-100 (385) |
0.33 °C |
PT-100 (393) |
0.3 °C |
PT-100 (JIS) |
0.3 °C |
PT-200 (385) |
0.2 °C |
PT-500 (385) |
0.3 °C |
PT-1000 (385) |
0.2 °C |
Resolution: |
0.1 °C |
J: |
0.7 °C |
K: |
0.8 °C |
T: |
0.8 °C |
E: |
0.7 °C |
R: |
1.8 °C |
S: |
1.5 °C |
B: |
1.4 °C |
L: |
0.7 °C |
U: |
0.75 °C |
N: |
0.9 °C |
Resolution |
J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F |
XK |
0.6°C |
BP |
1.2°C | |
Source Accuracy: |
NI-120 |
0.2 °C |
PT-100 (385) |
0.33 °C |
PT-100 (393) |
0.3 °C |
PT-100 (JIS) |
0.3 °C |
PT-200 (385) |
0.2 °C |
PT-500 (385) |
0.3 °C |
PT-1000 (385) |
0.2 °C |
Resolution: |
0.1 °C |
Note: |
Accuracy stated for 4-wire measurement. |
J: |
0.7 °C |
K: |
0.8 °C |
T: |
0.8 °C |
E: |
0.7 °C |
R: |
1.4 °C |
S: |
1.5 °C |
B: |
1.4 °C |
L: |
0.7 °C |
U: |
0.75 °C |
N: |
0.9 °C |
Resolution |
J, K, T, E, L, N, U: 0.1 °C, B, R, S: 1 °C |
XK |
0.6°C |
BP |
1.2°C | |
Specifications |
Ramp Functions |
Source functions: |
Voltage, current, resistance, frequency, temperature |
Ramps |
Slow ramp, Fast ramp, 25% step-ramp | |
Loop Power Function |
Voltage: |
12 V |
Accuracy: |
10% |
Maximum current: |
22 mA, short circuit protected | |
Step Functions |
Source functions: |
Voltage, current, resistance, frequency, temperature |
Steps |
25% of range, 100% of range | |
Safety Specifications |
Agency Approvals |
|
ATEX II 1 G Ex ia IIB 171°C |
|
I.S. Class I, Division 1 Groups | |
Mechanical & General Specifications |
Size |
|
130 x 236 x 61 mm |
|
5.188" x 9.291" x 2.402" | |
Weight |
|
Batteries |
|
Battery Replacement |
|
Separate battery compartment, accessible without breaking calibration seal | |
Side port connections |
|
Pressure module connector | |
|
|
|
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. |
| | |
|
|
|
|
|
|
|
|
|
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 |
| | |
|
|
|
|
|
|
|
|
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
|
|
|
|
|
|
| UPS Ground | United States | USD 0.00 |
|
| USPS Express Mail International (EMS) | Worldwide | USD 0.00 |
|
|
|
|
|
|
| | | |
|
|
|
|
|
|
|
|
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED
| | |
|
|
|
|
document.write('');
document.write('');
document.write('');
document.write(' ');
|
|