Features :
*The ADL5801 uses a high linearity, doubly balanced, active mixer core with integrated LO buffer amp lifier to provide high dynamic range frequency conversion from 10 MHz to 6 GHz.
*The mixer benefits from a proprietary linearization architecture that provides enhanced input IP3 performance when subject to high input levels.
*A bias adjust feature allows the input linearity, SSB noise figure, and dc current to be optimized using a single control pin.
*An optional input power detector is provided for adaptive bias control.
*The high input linearity allows the device to be used in demanding cellular applications where in-band blocking signals may otherwise result in degradation in dynamic performance.
*The adaptive bias feature allows the part to provide high input IP3 performance when presented with large blocking signals.
*When blockers are removed, the ADL5801 can automatically bias down to provide low noise figure and low power consumption.
*The balanced active mixer arrangement provides superb LO-to-RF and LO-to-IF leakage, typically better than −40 dBm. The IF outputs are designed to provide a typical voltage conversion gain of 7.8 dB when loaded into a 200 Ω load.
*The broad frequency range of the open-collector IF outputs allows the ADL5801 to be applied as an up-converter for various transmit applications.
*The ADL5801 is fabricated using a high performance IC process for SiGe.
*The device is available in a compact 4 mm x 4 mm, 24-lead LFCSP package and operates over a -40°C to +85°C temperature range. An evaluation board is also available.
Specifications:
*Broadband up-converter/down-converter:
Power conversion gain:1.8 dB
Broadband: RF, LO, and IF ports
SSB noise figure (NF) : 9.75 dB
Input IP3: 28.5 dBm
Input P1dB: 13.3 dBm
Typical LO drive: 0 dBm
Single-supply operation: 5 V at 130 mA
*Adjustable bias for low power operation:
Exposed paddle, 4 mm x 4 mm, 24-lead LFC
Exposed paddle, 4mm x 4mm, 24-lead LFCSP package
*Applications:
Cellular base station receivers;
Radio link down-converters;
Broadband block conversion;
Instrumentation;
*Specifications:
- RF: 10Mhz-6Ghz
- IF: LF-600MHz
- VCC=+5vdc
- Balun: TC4-1WG2
Package Included:
1pcs x RF Mixer
1pcs x Cable
Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.
POLICES ShippingPaymentWARRANTYWe only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.
Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
It takes about 7-15 working days to Canada; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.