This Atom Adhesives' Defroster and Antenna Repair Kit fixes the most common problems related to heated automotive glass. The kit includes: two-part Conductive Tab Repair
Epoxy if an existing bed of solder is not on the glass, to bond the tabs onto the glass forming an electrical and structural connection; Grid Repair for scratched or broken defroster
lines; This handy kit pays for itself.
Note: There are many YouTube video that will visually guide you through this process.
1. Clean the tab and the contact area with the alcohol prep. Then apply activator to both surfaces and let it dry.
2. Apply the completely mixed adhesive kit to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds;
howeve r, maintain
contact for 24 Hours with a tape for example until the adhesive is completely cured to get the best result.
3. Press the tab onto the contact area. Hold it in place until the adhesive sets up, usually about two minutes. Wait 24 hours to use the defogger.
The tabs located along the sides of the defroster connect the defroster electrically to the vehicles defrost circuit. One tab is the positive and the other ground. If a tab comes
off the defroster this will mean total instantaneous failure of the defroster.
1. Our kit is an epoxy adhesive. To use, carefully clean and dry all surfaces to be bonded from all dirt, dust, debris and handprints from the rear window.
2. Apply the completely mixed adhesive kit to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds;
however, maintain contact until adhesive is completely cured.
3. Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly
mixed prior to use.
4. Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to
mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
FEATURES:
See instruction for contained easy mixing easy mixing.