Speedway Black 6 Gauge Set Kit w/ Speedo, Tach, Fuel, Temp, Volt, Oil Pressure Universal Fit, Analog Gauge Series, Black, Stainless

$382.81 $313.95 Buy It Now, Click to see shipping cost, eBay Money Back Guarantee
Seller: Top-Rated Seller speedway_motors ✉️ (300,589) 99.5%, Location: Lincoln, Nebraska, US, Ships to: US & many other countries, Item: 383482953220 Speedway Black 6 Gauge Set Kit w/ Speedo, Tach, Fuel, Temp, Volt, Oil Pressure. Premium Construction: Premium stainless-steel bezel with a perimeter-lit black face ensures clarity during nighttime use., Comprehensive Monitoring: Set includes 3-3/8" tachometer gauge (8000 RPM), mechanical speedometer (160 MPH), 2-1/16" fuel level, water temperature (100-260 F), oil pressure (100 PSI), and voltmeter (8-16 VDC) gauges., DIY-Friendly Kit: Comes complete with sending units, capillary tubes, lighting, fuel level sender, and mounting brackets for hassle-free installation., Classic Aesthetics: Classic black face design with white lettering and needles complements any vehicle dash or interior., Reliable & Economical: Offers the durability and accuracy of high-end vehicle gauges without breaking the bank, making it perfect for muscle cars, classic trucks, and hot rods. Speedway 6-Gauge Set, Black Face, 3-3/8, Mechanical Sku # 91065026 Mfr. Part # 91065026 Condition New Brand Speedway Motors Sold Set Details Info
  • Full set of vehicle gauges for your muscle car, classic truck, or hot rod project
  • Car gauges set easily allows you to monitor all major vehicle systems
  • Includes sensors, lighting, fuel level sender, and mounting brackets
  • Oil pressure, temperature, and speedometer are mechanical, no expensive electronics to fail
  • Full sweep speedometer, tachometer, oil pressure, and water temperature gauges
  • Short sweep volts and fuel level gauges for cars, trucks, and boats
  • White incandescent perimeter lighting on all vehicle gauges
  • Metal retaining brackets for secure mounting in any dash panel
  • Tachometer requires resistor-core spark plug wires (solid core wires not supported)
  • Classic black face with white lettering and needles matches any dash/interior

A Full Set of Car Gauges That Won’t Break the Bank

Many of our favorite cars and trucks of the past featured the most basic instrument cluster. Often just a speedometer, water temperature, and fuel level were all that the driver had to monitor. If you were lucky, you might have an “idiot light” for oil pressure, and the older the car the bigger that “if” becomes. Early cars also had ammeters which showed state of charge or discharge and not actual charging system voltage. The main issue with ammeters has always been how they read this charge/discharge amperage, which often created charging system issues when the car gauge failed. Not to mention modern high-output alternators are simply not safe to run through an ammeter either.

Updating to a complete set of dash gauges not only ensures you have a way to monitor your vehicle’s vital systems but are usually easier to read at a glance with better illumination and are much more accurate than factory car gauges that are 50 plus years old, if they even work at all! Speedway Motors’ mechanical 6-gauge kit provides all the essentials you need, including a mechanical speedometer gauge, electric tachometer gauge, electric voltmeter gauge, electric fuel level gauge, mechanical water temperature gauge, and mechanical oil pressure gauge. This car gauges set easily fits into many of our available in application specific and universal fitments or simply grab the proper hole saw size and direct mount to any fiberglass, aluminum, or steel sheet/panel.

Build Quality Normally Reserved for Much More Expensive Vehicle Gauges

While our 6-gauge instrument kit is easy on your wallet, it is far from a set of “cheap aftermarket gauges” for your dash to get you on the road. While we kept costs in mind to provide a complete dash gauge solution, we built our automotive gauges with high clarity flat glass lenses instead of just injection molded clear plastic others use. The bezels are stainless steel and not chrome plated plastic or cheap tin either. We include metal mounting hardware (helpful when grounding auto gauges in a fiberglass dashboard for example), incandescent perimeter lighting in all dash gauges, and full instructions.

Dial faces are screen printed in black with white lettering and white needle pointer for a crisp visual appearance that allows for quick identification of engine vitals. We offer this same kit in a option if you prefer the modern white car gauge look. Our 6-gauge set exudes quality and once you have them in your hands, we think you’ll agree that they are one heck of a deal for your hard earned money. These are far from the cheap replacement gauges you’ll find online from some company you’ve never heard of. Shop with Speedway Motors and shop with confidence!

Easy To Install and Wire Up with No Confusing Electronics

Our car gauges are built to industry standard dimensions, with our speedometer and tachometer sized at 3-3/8-inches and the supporting vehicle gauges are 2-1/16 gauges. This allows for easy mounting in accessories like or if you have limited dash surface area to mount the full car gauge kit or wish to leave the factory gauge cluster in place. If space is limited, you may also wish to consider our without tachometer too.

Standard incandescent bulbs illuminate the gauge perimeter in a soft white light for a classic lighting style that fits any muscle car, hot rod, or truck build, and are easily replaced when needed. The mechanical speedometer uses standard GM 5/8-18 threaded cable connection, so all you have to do is determine proper cable length and transmission end style to order the appropriate if you don’t already have the correct cable in place.

The tachometer accepts any standard tach signal from points or electronic ignitions, or from a tach output connection on performance ignition boxes. The included mechanical water temperature gauge comes pre-fitted with a capillary tube assembly and brass adapters to fit any cylinder head or intake water passage, while the mechanical oil pressure gauge includes nylon tubing with compression fittings and adapters to connect to your engine block’s oil gallery port. These simple connections mean no tedious gauge calibrating or running wire harnesses to bulky sending units that get in the way of other engine components.

The included fuel level sender is configured for the popular Stewart Warner universal aftermarket values of 240 ohms full/33 ohms empty. The five-bolt sending unit is adjustable for tank depth from 6 to 24 inches and can be configured for left or right float arm swing, allowing it to be fitted to most any factory or aftermarket fuel tank/cell. If you do not wish to modify your fuel tank and your stock fuel level sending unit is in proper working order, we highly suggest using our . This handy little module allows you to easily configure your stock sending unit to work with any fuel level gauge resistance values for full and empty, saving you the hassle of dropping the fuel tank, draining it, cutting a hole for the aftermarket sending unit, and so on. It can be a huge time saver when installing new automotive gauges.

Install a set of our 6-gauge black face classic aftermarket car gauges today and rest easy knowing exactly what’s going on with your engine’s vitals whether you’re just driving to work or driving cross country.

Charts

Installation Tips

Make wiring your new gauges easier with our .

We offer a matching for this gauge series if your dash or console has the space for one.

On gauges with a single wire bulb socket that wire connects to your dash illumination circuit and the bulb socket grounds through the metal gauge body. In some instances you may need to connect a ground lead directly to the gauge body/mounting bracket for the light to work, for example when installing in a fiberglass dash panel.

We offer a replacement light socket with bulb for and for the as well.

For LS swaps we offer the correct metric adapters to plumb your and gauges.

Specs Sold in Quantity Set Gauge Type Mechanical Bezel Finish Stainless Lettering Color White Needle Color White Gauge Face Color Black Lighting Type Incandescent Notes Includes fuel sending unit. Oil pressure, Water temperature, Fuel level, Voltmeter, Tachometer, and Speedometer. Light Color White Lighted Yes Depth 3.25 Lens Style Flat Gauge Series Analog Gauge Style Mechanical Number of Gauge Housings 6 Gauge Set Design Dash Cluster Auxiliary Gauge Diameter 2-1/16 Inch Tachometer Diameter 3-3/8 Inch Speedometer Diameter 3-3/8 Inch Speedometer Included Yes Tachometer Included Yes Oil Pressure Gauge Included Yes Water Temperature Gauge Included Yes Fuel Level Gauge Included Yes Fuel Pressure Gauge Included No Water Pressure Gauge Included No Oil Temperature Gauge Included No Ammeter Gauge Included No Volt Gauge Included Yes MFG. Part # 91065026 Fuel Sender Included Yes Sending Unit Fuel level sender is 240 ohms empty, 33 ohms full Reviews

Yeah Rated by Olman on February 04, 2022

Summary: Most of the time it's custom and it doesn't always fit but that's the game you play

Yes, I recommend this product.

This is my third set of gauges Rated by Robert on January 12, 2022

Summary: Work great look gteat

Yes, I recommend this product.

The gages were a good fit for my1967 Ford F100 rebuild. Rated by Larry on January 06, 2022

Summary: I replaced the instrument panel with a complete set of gages on my 1967 Ford F100 pickup.

Pros: Very nice look. Panel is very serviceable.

Yes, I recommend this product.

I would buy again Rated by Jr on January 01, 2022

Summary: In a 83 firebird

Yes, I recommend this product.

i would buy again. they look great Rated by Jack on October 18, 2021

Summary: I replaced stock 1967 chevelle instrument panel with metal. they look great and fit well.

Yes, I recommend this product.

Related Items / Suggested Parts Complete 5-Gauge Set, 3-3/8 Inch Speedometer, Mechanical Speedway 6-Gauge Set, White Face, 3-3/8, Mechanical Lokar SP-1500U GM Speedometer Drive Cable Kit, Black Lokar SP-1501HT GM Speedometer Drive Cable Kit, Stainless Lokar SP-1502U Ford Speedometer Drive Cable Kit, Black Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
  • Condition: New
  • Brand: Speedway Motors
  • Type: Gauge Sets
  • Items Included: Water Temperature, Fuel sending unit
  • Color: Black
  • Manufacturer Part Number: 91065026
  • Universal Fitment: Yes
  • Item Height: 4.300
  • Item Width: 8.000
  • Item Length: 20.80
  • UPC: 686175657814

PicClick Insights - Speedway Black 6 Gauge Set Kit w/ Speedo, Tach, Fuel, Temp, Volt, Oil Pressure PicClick Exclusive

  •  Popularity - 229 watchers, 0.2 new watchers per day, 1,479 days for sale on eBay. Super high amount watching. 73 sold, 10 available.
  •  Best Price -
  •  Seller - 300,589+ items sold. 0.5% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive