Model: i LED
Power input AC110V 50Hz/60Hz
Power Output: DC5V/1A
Light source: 5W high power blue light LED
Checking method: the LED light is fine when the light is on during operating correctly
He wavelength of this product can match with the clinical dental resin solidification, such as 3M, Dentsply etc.
Wave length: 420mm-480mm
Light intensity: 1000mW/cm² ~ 2500mW/cm²
Working Condition:
Environment temperature: +5°C to +40°C
Relative humidity: 30%~75%
Atmosphere pressure: 70kPa to 106kPa
Equipment safety:
Operating mode: intermittent operation
Protection type against electrical shock: class 2
Protection degree against electrical shock: type B
Protection against harmful ingress of water or particular matter: ordinary equipment (1PX0)
TWO Modes:
TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.Its output light intensity is about 2300 mW/cm2-2500 mW/cm2.
NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about 1000 mW/cm2-1200 mW/cm2.
Safety in the presence of flammable anesthetic mixture with air, oxygen or nitrous oxide: not suitable under this condition
Operation: Turbo mode: screen shows P1, press the time button to select of time which could be 1 and 3 seconds. Its output light intensity is about 2300mW/cm²~25mW/cm²
FDA Statement: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller name: woodpeckerdent