Newest good quality XTC 2 Clip Tool for HTC phone M8 M9 unlock without Y cables

$204.57 Buy It Now, FREE Shipping, eBay Money Back Guarantee
Seller: dcdr ✉️ (29) 75%, Location: GUANGZHOU, CN, Ships to: WORLDWIDE, Item: 283381359444 Newest good quality XTC 2 Clip Tool for HTC phone M8 M9 unlock without Y cables.

Newest good quality XTC 2 Clip Tool for HTC phone M8 M9 unlock without Y cables

Note: 

1.please note all our items are original and activated, but if you are not familiar with this

item or you don ’t know how to use it, we suggest you don ’t buy it as we can only provide

simple technical support, such as install the driver. In order to convenient for our shipment,

please leave your phone number when you buy this item not leave your Email address and please

make sure the city name and zip code is corresponding when you write your address, otherwise

you need cancel the transaction and make new order with correct address.

2. we don't ship the item to PO BOX address , and we only ship the item to English address, so

please leave us your physical English address when you pay

Supported Models

XTC 2 Clip is supposed to support the whole range of HTC phones, however the features may differ from model to model.

Below is the list of tested models as per 1 May 2015:

New age

·                                  HTC M9

·                                  Butterfly

·                                  Butterfly 2

·                                  Desire 200

·                                  Desire 300

·                                  Desire 400 DualSim

·                                  Desire 500 dualsim

·                                  Desire 510

·                                  Desire 526G+ dualsim

·                                  Desire 600 dualsim

·                                  Desire 601 Dualsim

·                                  Desire 601 singlesim

·                                  Desire 610 singlesim

·                                  Desire 620 Dual

·                                  Desire 700 Dual

·                                  Desire 816 dual sim

·                                  Desire 816 SingleSim

·                                  Desire 816G

 

·                                  Desire 820

·                                  Desire 820 Dual sim 820u

·                                  Desire 820 mini

·                                  Desire 820s

·                                  Desire 826w

·                                  Desire C

·                                  Desire Eye

·                                  Desire SV

·                                  Desire U dualsim

·                                  Desire V

·                                  Desire X

·                                  Droid Verizon

·                                  E8 SingleSim Sprint

·                                  Nexus 9

·                                  One

·                                  One E8 dual

·                                  One E8 M8Sx Red

·                                  One J (KDDI Japan)

 

·                                  One M7

·                                  One M8 DualSim

·                                  One M8 SingleSim

·                                  One Max

·                                  One Mini

·                                  One Mini 2

·                                  One Remix Verizon

·                                  One S

·                                  One SV

·                                  One V

·                                  One X

·                                  One XL

·                                  Rider 4G

·                                  Sensation (Pyramid)

·                                  Sensation XL (X315e)

·                                  Vivid

How does it work?

In order to use its functions – you have to connect it to the SD card port of your phone. The SD port may be located on the left, right or rear (battery) part of your phone. If your phone has no SD port – you must use Y-cable.

Operation mode

There are 2 operation mode for XTC 2 Clip device:

·                                  direct – when the phone is in fastboot mode & connected to the PC, using the XTC 2 Clip software

·                                  offline – when using a SIM Lock menu of bootloader. To use the offline mode you must first save special service files on XTC 2 Clip device.

Direct mode

To use direct mode:

·                                  Insert XTC 2 Clip device into phone SD card slot, power on phone into bootloader mode using “vol-down + pwr” button. And select “FASTBOOT” option.

·                                  Connect phone to your PC.

·                                  Run the XTC 2 Clip software and select “Direct mode”.

·                                  Choose the desired operation and press corresponding button.

SIM LOCK FUNCTION IS NOT AVAILABLE IN DIRECT MODE! PLEASE USE OFFLINE MODE FOR SIM LOCK MANAGEMENT.

Important

IF YOU GET A ‘SD CARD NOT FOUND’ MESSAGE – IT MEANS THAT THE XTC 2 CLIP WAS CONNECTED AFTER PHONE WAS POWERED ON. IN THIS CASE PRESS THE ‘REBOOT BOOTLOADER’ BUTTON AND REPEAT THE DESIRED OPERATION.

 

Offline mode

How to prepare service files on XTC 2 Clip device:

`

·                                  Connect the XTC 2 Clip device to your PC using any compatible microsd card reader.

·                                  The device will be detected as a flash/disk drive.

·                                  Run the XTC 2 Clip software and select “SD editor” tab.

·                                  If you have previously had your service files on your device, please press “Read from drive” button, otherwise you will lose all your existing files once used the “Save to drive”.

·                                  Select the options you need and press “Save to drive”

·                                  Insert XTC 2 Clip device into phone SD card slot, power on phone into bootloader mode using “vol-down + pwr” button and select “SIMLOCK” option.

Important

THE SIM LOCK SETTINGS ARE BOUND TO THE PHONE’S IMEI. IN OTHER WORDS, IF YOU NEED TO LOCK/UNLOCK A PHONE, YOU MUST ADD PHONE’S IMEI TO SPECIAL ‘CONFIG.DAT’ FILE USING THE ‘SD EDITOR’ TAB.  OTHERWISE YOU WILL GET ‘IMEI CHECKING FAIL’ AND YOUR PHONE WILL NOT BE UNLOCKED/LOCKED! CID, IMEI, SECURITY FLAG SETTINGS ARE NOT BOUND, YOU CAN USE IT ON AS MANY PHONES AS YOU WISH WITHOUT HAVING TO CONNECT THE DEVICE TO PC EACH TIME.

 

Offline mode – manual files creation

It may happen that you need to create service files on a PC with no XTC 2 Clip software installed. In this case you can manually create the files for:

·                                  IMEI change/repair – imei.txt

·                                  Security level change – sf.txt

·                                  CID change – cid.txt

Please note, that unlike mentioned files, SIM lock configuration ‘config.dat’ is a binary file, and you may need to use a hex editor to create it. Therefore it’s recommended that you use an XTC 2 Clip software to create/manage this file.

TO CREATE/MODIFY THE FILES YOU CAN USE SIMPLE ‘NOTEPAD’ SOFTWARE

IMEI file

To modify the phone’s IMEI you need to create a text file called ‘imei.txt’ in the root folder of a XTC 2 Clipdevice disk drive. Once created, put inside a 14 digits of a new IMEI, for example: 12345678901234

SF file

To modify the phone’s security level (S-ON/S-OFF) you need to create a text file called ‘sf.txt’ in the root folder of a XTC 2 Clip device disk drive. Once created, put inside a number that corresponds to the desire security level:

·                                  0  means security OFF (S-OFF)

·                                  1  means (S-ON level 1)

·                                  2  means (S-ON level 2)

·                                  3  means (S-ON level 3, highest)

CID file

To modify the phone’s CID you need to create a text file called ‘cid.txt’ in the root folder of a XTC 2 Clip device disk drive. Once created, put inside a 8 symbols of a new CID, for example: HTC__001

Shipping Policy

 

We will send out the item within 2-3 days through DHL/FEDEX/USPS/EUB to the below countries:

 Germany, France, United Kingdom, 

Australia  ,

USA , Canada

Please note: we ship the item to the aboving country and district:. other countries, pls contact me to 

confirm the shipping cost. Thank you very much!!!

We will send tracking number to your eBay email within 1 day after sending out your item

We will mark the item at the very low value, so that you do not need to pay for the tax or pay a little tax.

Payment policy:

We accept Paypal only.

Payments must be finished within 5 working days after bid, otherwise, Unpaid Item dispute will be reported

to eBay.

Refund &Return policy

We take all the responsibility during delivery. If you do not receive your item, we will refund you the full 

money or send you a new item according to your request.

We can accept the return item within 60 days after the buyer receives it. Once we receive the return item,

then we will refund you full money.

Feedback Policy

We will very appreciate you give us positive feedback (5 star) ASAP.  If the item you got in any problem, 

 PLS don’t hesitates to contact us.  We will do our best to help solve the problem

 

  • Condition: New

PicClick Insights - Newest good quality XTC 2 Clip Tool for HTC phone M8 M9 unlock without Y cables PicClick Exclusive

  •  Popularity - 1 watcher, 0.0 new watchers per day, 1,869 days for sale on eBay. Normal amount watching. 1 sold, 3 available.
  •  Best Price -
  •  Seller - 29+ items sold. 25% negative feedback. OK seller. eBay Money Back Guarantee: Get the item you ordered, or your money back!

People Also Loved PicClick Exclusive