VICTOR 2004A Dual Channel Function/Arbitrary Wave Signal Generato
Notice:
The standard package don't include batteries.
Because,the international air shipping forbid to ship liquid,powder and batteries,
we can not put them in the package box.
Hope you can understand buy them in your local store or supermarket.
At the same time, please forgive us that we are unable to provide the English user manual.
If you need it, please contact the customer service after purchase.
Thanks for your support!
VICTOR2000A series dual-channel function/arbitrary wave generator
(hereinafter referred to as VICTOR2000A series) adopts direct digital frequency synthesis technology,
which can output high-precision, stable, and low-distortion signals.
The VICTOR2000A series has three models: VICTOR2003A, VICTOR2004A, and VICTOR2006A,
and the corresponding maximum output frequencies are 25MHz, 40MHz and 60MHz respectively
Features
· Using a 3.5-inch 480x320TFT LCD screen with a clear graphical interface;
· Support Chinese and English menu;
· · Key-press help for easy access to information;
· · The two channels are independent of each other, with phase synchronization function;
· · 200MSa/S sampling rate, 13-bit vertical resolution, 8k storage depth;
· · Built-in 5 basic waveforms and 32 arbitrary waveforms;
· · Waveform storage; support internal storage of 50 sets of user-defined and edited waveforms;
· · Pulse wave output with adjustable edge time;
· · Internal/external AM, FM, PM, ASK, FSK, PSK modulation functions
· · Dual-channel output, the highest output frequency is 60M.
· · Linear/logarithmic sweep frequency and pulse train waveform output;
· · With 100MHz high-precision frequency counter and 32-bit counter;
· · Communication interface: standard-RS232 interface, USB Device interface, optional-USB Host, external analog modulation interface.
USB Host supports U disk storage;
· · Equipped with multi-functional arbitrary waveform editing software.
· ·
· Standard accessories
· · 1. One 30A51 three-core power cord
· 2. One 33A52 BNC coaxial cable
· Optional accessories
· · 1. 33P01 BNC-Alligator Clip Cable
· 2. 32P02 type cabinet installation kit
· 3. RS232 serial line
· 4. USB data cable
2. Product technical indicators
Frequency characteristics | ||||||||
VICTOR2003A |
VICTOR2004A |
VICTOR2006A | ||||||
Sine wave |
1μHz ~ 25MHz |
1μHz ~ 40MHz |
1μHz ~ 60MHz | |||||
square wave |
1μHz ~ 15MHz |
1μHz ~ 15MHz |
1μHz ~ 15MHz | |||||
Triangle wave |
1μHz ~ 15MHz |
1μHz ~ 15MHz |
1μHz ~ 15MHz | |||||
Pulse wave |
100μHz ~ 6MHz |
100μHz ~ 6MHz |
100μHz ~ 6MHz | |||||
Arbitrary wave |
1μHz ~ 6MHz |
1μHz ~ 6MHz |
1μHz ~ 6MHz | |||||
Noise (-3dB) |
7MHz bandwidth | |||||||
Frequency resolution |
1μHz | |||||||
Frequency accuracy |
±5ppm | |||||||
Frequency stability |
±1ppm/3hours | |||||||
Waveform characteristics | ||||||||
Wave type |
Sine wave, square wave, triangle wave, pulse, noise, arbitrary wave (including DC).There are 32 arbitrary waveforms and 50 user-defined waveforms. | |||||||
Wave length |
8192 points | |||||||
Waveform sampling rate |
200MSa/s | |||||||
Waveform vertical resolution |
13 bits | |||||||
Sine wave characteristics | ||||||||
Sine wave |
Harmonic suppression |
≥45dBc(<1MHz); | ||||||
Total harmonic distortion |
<0.8%(20Hz ~ 20kHz, 0dBm) | |||||||
Square wave signal characteristics | ||||||||
square wave
|
Rise/fall time |
<20ns | ||||||
Overshoot |
<5% | |||||||
Duty cycle |
Frequency <100kHz: 1%~99%; 100kHz ≤ Frequency <5MHz: 20% ~ 80%; 5MHz ≤ Frequency: 40% ~ 60% (0.1% Resolution) | |||||||
Pulse wave characteristics | ||||||||
Pulse wave
|
Pulse Width |
20ns minimum; 1ns resolution | ||||||
Edge transition time |
20ns minimum; | |||||||
Overshoot |
<5% | |||||||
Jitter |
6ns+0.1% period | |||||||
Sawtooth characteristics | ||||||||
Sawtooth wave |
Learity |
≥98%(0.01Hz~10kHz) | ||||||
Symmetry |
0.0 ~: 100.0% (Resolution: 0.1%) | |||||||
Output characteristics | ||||||||
amplitude | ||||||||
Amplitude range |
Frequency of <10MHz |
110MHz ≤ Frequency <30MHz |
30MHz≤ frequency | |||||
2mVpp ~ 20Vpp |
2mVpp ~10Vpp |
2mVpp ~5Vpp | ||||||
Amplitude resolution |
1mV | |||||||
Amplitude accuracy |
Set value of 1% + 2mVpp (1 kHz sine wave, 0 offset,> 10mVpp) | |||||||
Amplitude flatness |
±0.4dB <10MHz ; | |||||||
(Relative to 1k sine wave, 1Vpp) |
50 Ω ± 10% (typical) | |||||||
Output impedance |
All signal outputs can operate within 60s with a short circuit to load | |||||||
protection | ||||||||
Offset |
Output amplitude>0.1V |
2mV | ||||||
To |
±10Vpk,ac + dc |
±0.250Vpk,ac + dc | ||||||
Output range |
1mV | |||||||
Bias resolution | ||||||||
Phase characteristics |
0~359.9° | |||||||
Phase adjustment range |
0.1° | |||||||
Phase resolution | ||||||||
External measurement function Frequency counter function |
Frequency measurement range |
1Hz ~ 100MHz | ||||||
Gate time |
0.01s ~ 10sContinuous adjustment | |||||||
Counter function |
Counting range |
0 ~ 4294967295 | ||||||
Counting method |
Manual | |||||||
2Vpp~20Vpp | ||||||||
Input signal voltage range |
Two coupling modes: DC or AC | |||||||
Coupling method |
1ns resolution, maximum measurable 20s | |||||||
Pulse width measurement |
1ns resolution, maximum measurable 20s | |||||||
Period measurement | ||||||||
SYNC output |
CH1 or CH2, the default CH1 | |||||||
Output channel |
The TTL is compatible | |||||||
Level |
50Ω | |||||||
impedance |
< 25ns | |||||||
Rise/fall time |
25MHz | |||||||
Maximum frequency | ||||||||
AM modulation |
CH1 or CH2, the default CH1 | |||||||
Output channel |
Sine wave, square wave, sawtooth wave, pulse wave, arbitrary wave (except DC) | |||||||
Carrier |
Internal/external | |||||||
source |
Sine wave, square wave, triangle wave, oblique wave | |||||||
Modulation wave |
2mHz~20kHz | |||||||
Modulation frequency |
0%~120% | |||||||
Modulation depth | ||||||||
FM modulation |
CH1 or CH2, default CH1 | |||||||
Output channel |
Sine wave, square wave, sawtooth wave, pulse wave, arbitrary wave (except DC) | |||||||
Carrier |
Internal/external | |||||||
source |
Sine wave, square wave, triangle wave, oblique wave | |||||||
Modulation wave |
2mHz~20kHz | |||||||
Modulation frequency |
0~maximum carrier frequency | |||||||
Frequency deviation | ||||||||
PM modulation |
CH1 or CH2, default CH1 | |||||||
Output channel |
Sine wave, square wave, sawtooth wave, pulse wave, arbitrary wave (except DC) | |||||||
Carrier |
Internal/external | |||||||
source |
Sine wave, square wave, triangle wave, oblique wave | |||||||
Modulation wave |
0°~360° | |||||||
Phase deviation | ||||||||
ASK modulation |
CH1 or CH2, default CH1 | |||||||
Output channel |
Sine wave, square wave, sawtooth wave, pulse wave, arbitrary wave (except DC) | |||||||
Carrier |
Internal/external | |||||||
source |
Square wave with 50% duty cycle | |||||||
Modulation wave |
2mHz~1MHz | |||||||
Modulation rate |
0~Carrier amplitude | |||||||
Modulation amplitude | ||||||||
FSK modulation |
CH1 or CH2, default CH1 | |||||||
Output channel |
Sine wave, square wave, sawtooth wave, pulse wave, arbitrary wave (except DC) | |||||||
Carrier |
Internal/external | |||||||
source |
Square wave with 50% duty cycle | |||||||
Modulation wave |
2mHz~1MHz | |||||||
Keying frequency | ||||||||
PSK modulation |
CH1 or CH2, default CH1 | |||||||
Output channel |
Sine wave, square wave, sawtooth wave, pulse wave, arbitrary wave (except DC) | |||||||
Carrier |
Internal/external | |||||||
source |
Square wave with 50% duty cycle | |||||||
Modulation wave |
0°~360° | |||||||
Modulation phase | ||||||||
Sweep function |
CH1 or CH2, default CH1 | |||||||
Sweep channel |
Linear scan, logarithmic scan | |||||||
Sweep type |
1ms ~ 500.000s | |||||||
Sweep time |
Arbitrary setting of starting point and ending point | |||||||
Predetermined area |
Forward Reverse | |||||||
Sweep direction |
Internal, external, manual | |||||||
Trigger source | ||||||||
Burst characteristics |
CH1 or CH2, default CH1 | |||||||
Output channel |
Sine wave, square wave, sawtooth wave, pulse wave, noise, arbitrary wave (except DC) | |||||||
Carrier |
1~65535 or unlimited, gated | |||||||
Pulse count |
0~360° | |||||||
Start/stop phase |
1μs~500s | |||||||
Internal cycle |
external | |||||||
Gating source |
Internal, external, manual | |||||||
Trigger source | ||||||||
Trigger input |
2Vpp~20Vpp | |||||||
Input signal voltage range |
Two coupling modes: DC or AC | |||||||
Coupling method |
>100ns | |||||||
Pulse Width Reaction time |
<500ns (burst) | |||||||
<10μs (sweep frequency) | ||||||||
Analog modulation input |
1MΩ | |||||||
input resistance |
±2.5V ac+dc | |||||||
Signal range |