12pcs/lot Magnetic 130 310 motor Solar electric small engine for DIY Accessories
12.83 USD 13.8 USD
2.0 USD
7% offRadioLink 2.4Ghz 6CH R6F Receiver for RC6GS RC4GS RC3S RC4G T8FB RC Transmitter
11.13 USD 11.97 USD
2.0 USD
7% offJMT Stubby 5.8G 2.5Dbi RHCP SMA RP-SMA FPV Antenna for RC Drone
6.12 USD 6.72 USD
2.0 USD
9% offBGNING Diving Lights Ball Butterfly Clip Arm Clamp Mount For GOPRO 3+/4/5
6.92 USD 7.44 USD
2.0 USD
7% offInternal Single Bay Tray-Less Mobile Rack Enclosure for 2.5" 3.5" SATA HDD SSD
25.06 USD 26.95 USD
2.0 USD
7% offUSB3.0 OTG Adapter For iPhone 13 12 11 Pro XS Max XR X 8 Plus 7 6s iPad U Disk
4.9 USD 5.38 USD
3.0 USD
9% offJMT SPP-SBUS PPM PWM Signal Converter Switch 3.3-20V 8CH Module for RC Receiver
8.3 USD 8.93 USD
2.0 USD
7% offBGNing Aluminum Alloy Extension Mount Arm for Gopro Max Hero 8 Sports Cameras
5.95 USD 6.4 USD
2.0 USD
7% offBGNING ES-78 Camera Lens Hood Shade for Canon EF 50mm F1.2L USM Camera Len Parts
5.64 USD 6.2 USD
Free shipping
9% offGemfan CNC Spinner 30mm 35mm 40mm 45mm 50mm Diameter For Folding Propeller
11.47 USD 12.6 USD
2.0 USD
9% offCord Angle 90 Cable to Micro-B Downward 5G/bps to USB3.0 Extension Flat Degree
7.09 USD 7.62 USD
2.0 USD
7% offSNT Y60 3005 1:64 RC Car FPV Car/Non FPV Car with Removable Mangtic FPVBOX 4WD
100.32 USD 107.87 USD
Free shipping
7% offBaseus USB Bluetooth 5.0 Wireless Stereo Audio Music Adapter Dongle Receiver TV
5.71 USD 6.27 USD
2.0 USD
9% offMotorcycle Handlebar Clamp Mount Bar Holder Clip for Gopro Insta360 ONE X2/X
3.6 USD 3.96 USD
3.0 USD
9% offUSB3.0 OTG Adapter für iPhone 13 12 11 Pro XS Max XR X 8 Plus 7 6s iPad U Disk
4.73 USD 5.2 USD
3.0 USD
9% offGPU Riser Cable PCI-E 3.0 16x Extender Universal 90° Adapter3060 Graphic Card
16.19 USD 17.41 USD
Free shipping
7% off
BETAFPV SuperP 14CH Diversity Receiver ELRS 2.4GHz/915MHz/868MHz Built-in a TCXO For Multirotors Fixed-wing aircraft Cars Boats
Being the first to market! SuperP 14CH Diversity Receiver has been designed not only for long-range flying, aerial photography but also suitable for the application of fixed-wing, helicopters, RC cars, boats and etc. It has TCXO oscillator, two antennas, dual receiver chains, and Plug-N-Play ports, and adds more features, which support 14 channels for the external barometer, RGB light strip, and other external sensors that are currently under development. It offers 2.4GHz, 915 MHz and 868MHz versions, and greatly fulfills the requirements of reliability for long-range flying, aerial photography, or FPV freestyle tricks. With this receiver, users are able to get a more stable and reliable experience on RC models.
A ton of ExpressLRS items are available now!
Based on BETAFPV SuperD True Diversity Receiver and Micro Receiver, the SuperP 14CH Diversity Receiver takes the good features of them. For example, 14 PWM channels, two antennas, dual receiver chains, TCXO oscillator, etc. Besides, it has an I2C serial port for more external sensors such as a barometer, and a 3-pin port is reserved for RGB light strip. With the combination of the good points, SuperP RX ensures stability and reliability for users.
SuperP RX | Micro RX | SuperD RX | |
Weight | 15.5g (2.4GHz), 15.8g (915/868MHz) | 3.5g(2.4GHz) | 1.1g (2.4G Hz ) , 1.2g (915/868MHz) |
Antenna | IPEX MHF 1 Antenna | IPEX MHF1 + T antenna | IPEX MHF1 + T antenna |
PWM Channel | 14 CH | 5 CH | - |
Frequency | 2.4GHz ISM, 915MHz (FCC), 868MHz (EU) | 2.4GHz ISM | 2.4GHz ISM, 915MHz (FCC), 868MHz (EU) |
Telemetry Power | 100mW(2.4GHz), 50mW(915/868MHz) | 17mW(2.4GHz) | 100mW(2.4GHz ), 50mW(915/868MHz) |
Serial Protocol | PWM, CRSF or SBUS | PWM, CRSF | CRSF |
Input Voltage | 3.5~8.4V | 5~9V | 5V |
Battery Voltage Detector | 1-6S | 1-6S | - |
Supported Device | Barometer(SPL06) | - | - |
Model Type | Fixed-wing aircraft, Helicopter, RC Cars, RC Boats | Fixed-wing aircraft, Helicopter, RC Cars, RC Boats | FPV Drone, Fixed-wing aircraft |
The ExpressLRS receiver protocol can be widely used for more models such as multi-rotors, fixed-wing planes, helicopters, RC cars, RC Boats and etc. The two antennas and dual receiver chains design greatly fulfill the requirements for long-range flying and aerial photography.
It is recommended to place the antenna separately and vertically as far as possible for a better signal.
SuperP 14CH Diversity Receiver is built-in a TCXO (temperature compensated crystal oscillator), which is shared by two RF chips for a super accurate clock source. The true diversity receiver including two RF chips and PA+LNA will generate a large amount of heat when working. With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long-range flight. Click to learn more about the TCXO.
The diagram for SuperP 14CH Diversity Receiver is below.
RGB status indication for SuperP 14CH Diversity Receiver is shown below.
RGB Color | Status | Description |
Rainbow | Fade effect | Power on |
Green | Slow flash | WIFI upgrading mode |
Red | Quick flash | No RF chip detected |
Orange | Double flash | Binding mode |
Orange | Triple flash | Connected, but mismatched model-match configuration |
Orange | Slow flash | Waiting for connection |
Solid on | Connected and color indicates packet rate |
The below picture shows the RGB light color for the 2.4GHz version corresponding to the packet rate.
The below picture shows the RGB light color for the 915MHz and 868MHz versions corresponding to the packet rate.
Note: F1000 and F500 are packet rates in FLRC mode, providing faster modulation and lower latency, but at the same time having shorter reception distance than normal Lora mode. This mode is great for racers.
D500 and D250 are packet rates in DVDA (Deja Vu Diversity Aid) mode. This mode works at the F1000 data packet rate of FLRC mode, providing better link connection in the case of complex interference by sending the same data packet multiple times. D500 and D250 indicate that the same data packet is sent twice and four times respectively .
D50 is an exclusive mode under ELRS 900M. It will send packets four times repeatedly under 200Hz Lora Mode. Its receiving distance is equivalent to 200Hz.
100Hz Full is the mode that can achieve 16-channel full resolution output at the 200Hz packet rates of Lora mode. Its receiving distance is equivalent to 200Hz.
Enter the configuration page via WiFi mode.
On the configuration page, users can set the PWM pin, CRSF pin, I2C pin, etc. The pin number corresponds to specified channels. You can refer to the chip I/O function table.
Note: Please do not modify other function pins.
Pin | 13 | 15 | 2 | 0 | 4 | 9 | 10 | 5 |
Main | CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 |
Second | ||||||||
Pin | 18 | 23 | 19 | 22 | 3 | 1 | 21 | 36 |
Main | CH9 | CH10 | CH11 | CH12 | CH13 | CH14 | RGB | VBAT |
Second | SCL | SDA | RX | TX | ||||
Third | SBUS |
Note: VBAT is the battery voltage detection port, which supports 1~6S battery voltage detection.
When the RX is configured to use CRSF output, CH13 becomes RX and CH14 becomes TX.
When the RX is configured to use SBUS output, CH13 has no output, and CH14 becomes SBUS.
The CH11 and CH12 of the receiver have been configured as I2C serial ports by factory default. At this time, CH13 becomes CH11, and CH14 becomes CH12.
For example, I2C communication serial port settings are as follows:
Note: The CH11 and CH12 of the receiver have been configured as I2C serial ports by factory default. Then CH13 becomes CH11, and CH14 becomes CH12.
The default firmware of the SuperP 14CH Diversity Receiver uses the ExpressLRS V3.3.0 protocol and has no preset binding phrase. Therefore, the firmware version of the transmitter module must be ExpressLRS V3.0.0 or later versions. Both the receiver and transmitter module should not have any binding phrase.
Note: After the device has been successfully bound, the receiver will record the device, and future binding will be automatic. There would be no need to go through the binding process again.
The setting method is as follows:
Failsafe settings are as follows: The output value of the servo can be obtained when the out-of-control protection value is inputted and the system goes out of control.
Note: Do not click "Reverse". If you click the "750us", the failsafe value needs to be halved. When the failsafe value is greater than 1500, the mode will automatically switch to "On/Off" mode.
Channel output settings are as follows: Select the desired mode from the dropdown menu of the mode, and the following are descriptions of all output modes.
CRSF/SBUS output settings are specified below:
Note: When the receiver is configured to use CRSF output, CH13 becomes RX and CH14 becomes TX; When the receiver is configured to use SBUS output, CH13 has no output, and CH14 becomes SBUS.
ExpressLRS is an open-source RC link for RC applications. Everyone could find this project on Github or join the discussion in the Facebook Group . Choosing a suitable receiver to fly quadcopter or other RC models is very important. BETAFPV ExpressLRS Receivers greatly fulfill pilots' requirements for FPV flying.
ExpressLRS is an open-source RC link for RC applications. Everyone could find this project on Github or join the discussion in the Facebook Group .
Aluminium Mobile phone mount For DJI Osmo Mobile6/om5/ OM SE Stabiliser 1/4 ale
9.26 USD
Free shipping
Sunnylife Action4 GO3 Universal Headband Bracket GoPro12 for Camera Phone Clip
10.38 USD
2.0 USD
SPECTER 1804-2450KV/3500KV Brushless Motor 7075 Aviation N52H Magnetic Steel New
23.75 USD
Free shipping
Background Suit Photography Background Polyester Screen Invisibility Cloak New
12.93 USD
2.0 USD
Sunnylife Mini 4 Pro Paddle Tyler Spiral Blade Fixing Tyler Protection Cover New
6.62 USD
2.0 USD
Screw Mount Accessories Adapter Metal Conversion 3/8 Connector Camera Photo 1/4
2.66 USD
2.0 USD
ARRI Stabilizer Camera Tripod 1/4 Locating FX30 FX3 Cage 3/8 Metal for Quick
5.66 USD
2.0 USD
11 Adapter Mini Extension Code 7 for Mount for 8 10 Seat Camera MTB Hero Action
3.76 USD
2.0 USD
Slider for Plate Camera Holes ARRI Rig 1/4" Cage Cheese 3/8" Light 120mm Mount
9.32 USD 10.02 USD
2.0 USD
7% offArm Insta360 Magic Motorcycle Adapter for Holder Super Bicycle Phone 1" Clamp
13.93 USD 15.31 USD
Free shipping
9% offRonin Board Accessory Universal Plate Quick for Ballhead Arca Gimbal Tripod
13.38 USD 14.7 USD
Free shipping
9% offHolder Support Gas Conversion Flat Stand Bracket Outdoor Camping Light Extended
3.35 USD 3.68 USD
3.0 USD
9% offCamera 1/4" Position Cheese for ARRI Light Mount Rail Cage 120mm 3/8" Quick
9.12 USD 10.02 USD
2.0 USD
9% offArca Accessories Release Port Cord Camera for Quick Tripod Winder Cable Cable
4.59 USD 5.04 USD
3.0 USD
9% offDSLR Microphone Mount Camera for Flash Hot Monopod Head Screw 1/4" Base Adapter
3.32 USD 3.65 USD
3.0 USD
9% offStandard 1/4 "3/8" Screwdriver For Camera Frame Quick Release Plate H2 Wrench
3.08 USD 3.39 USD
2.0 USD
9% off