White Ash Burl wood veneer 6” X 12” raw no backer 1/42" thickness

$23.68 Buy It Now or Best Offer, Click to see shipping cost, 30-Day Returns, eBay Money Back Guarantee
Seller: cardinalveneer ✉️ (549) 95.2%, Location: Louisville, Kentucky, US, Ships to: WORLDWIDE, Item: 134464087874 White Ash Burl wood veneer 6” X 12” raw no backer 1/42" thickness.

White Ash Burl wood veneer sample 6” x 12” with no backer raw veneer A" grade 1/42" thickness.  One piece as pictured. The width of 6" is measured at the midpoint. The piece is not square. It is bigger at base and smaller at other end. 

About pictures : Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. 

Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

 

Thickness : (will not always be exactly correct, but relatively close)

Paper-backed veneers = 1/40”  

Wood-backed veneers = 1/25”

Raw plain veneer with no backing = 1/32”-1/42”

Phenolic backed veneer = 1/16th"-1/25th"

How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge.

How to apply : Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.

How to finish : most any conventional finishing products can be used with veneer that is applied correctly.

 

Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection

  • Condition: New
  • Brand: White Ash Burl wood veneer sample size piece small
  • Burl Ash White wood veneer sample thin: Sheet grade quality 1/42" thickness small piece
  • Veneer Type: Raw
  • Model: Wood veneer Ash White Burl knots 1/42" thickness
  • MPN: 6" x 7" x 1/42"
  • Wood Type: Ash
  • Item Type: Veneer Sheet

PicClick Insights - White Ash Burl wood veneer 6” X 12” raw no backer 1/42" thickness PicClick Exclusive

  •  Popularity - 0 watchers, 0.0 new watchers per day, 400 days for sale on eBay. 0 sold, 2 available.
  •  Best Price -
  •  Seller - 549+ items sold. 4.8% negative feedback. Good seller with good positive feedback and good amount of ratings.

People Also Loved PicClick Exclusive