Norton 500 Domiracer Doug Hele 1961 3RD place Isle of Man Senior TT photo

$13.19 Buy It Now or Best Offer, $9.47 Shipping, eBay Money Back Guarantee
Seller: aherl ✉️ (5,554) 99%, Location: Utr., NL, Ships to: WORLDWIDE, Item: 374404661077 Norton 500 Domiracer Doug Hele 1961 3RD place Isle of Man Senior TT photo.

A superb and rare photo of the magnificent Norton 500cc Domiracer that finished in the hands of Tom Phillis third in the 1961 Senior TT on the Isle of Man! Holding this great machine is its brilliant designer: Doug Hele ! The works Domiracer project was originally started to compete in the Daytona 200 races and later thought of as a possible successor to the successful single cylinder Norton Manx production racer.

 

In 1961 Doug Hele converted the Norton Dominator in pure racing version, called the Domiracer . Dennis Greenfield and Fred Swift rode a first 500cc prototype to victory in the 1961 Thruxton 500. Compared to the standard Dominator, the racer featured a special racing camshaft that ran on needle roller bearings, had eccentric rocker adjustment, hollow tappets and pushrods, larger crankpins, shorter conrods, and a pressurized oil supply to the rockers that was fully independent from the regular lubrication system. Ken Sprayson of Reynolds Tubes made a new featherbed chassis for the new racer, which developed a hefty power output of 55 bhp at 8,000 rpm. At the end of 1962 Norton closed off the Domiracer project and sold all bikes, parts and designs to Paul Dunstall.

 

The original Norton company was formed by James Lansdowne Norton (Known as Pa) in Birmingham in 1898. In 1902 Norton began building motorcycles with French and Swiss engines. In 1907 a Norton ridden by Rem Fowler won the twin-cylinder class in the first Isle of Man TT race, beginning a sporting tradition that went on until the 1960s – The Isle of Man Senior TT, the most prestigious of events, was won by Nortons ten times between the wars and then every year from 1947 to 1954. The first Norton engines were made in 1908, beginning a line of side-valve single cylinder engines which continued with few changes until the late 1950s. In 1913 the business declined, R.T. Shelley & Co., the main creditors, intervened and saved it. Norton Motors Ltd was formed shortly afterwards under joint directorship of James Norton and Bob Shelley. J.L. Norton died in 1925 aged only 56, but he saw his motorcycles win the Senior and sidecar TTs in 1924.  Designed by Walter Moore, the CamShaft One (CS1) engine appeared in 1927, based closely on the ES2 (pushrod) engine and using many of its parts. On his departure to NSU in 1930, an entirely new OHC engine was designed by Arthur Carroll, which was the basis for all later OHC and DOHC Norton singles. ( Moore 's move to NSU prompted staff to claim that NSU stood for "Norton Spares Used") That decade spawned the Norton racing legend. Of the nine Isle of Man Senior TTs (500 cc) between 1931 and 1939 Norton won seven. Up to 1934, Norton bought the excellent Sturmey Archer gearboxes and clutches. When Sturmey decided to discontinue production, Norton bought the design rights, and had them made by Burman, a manufacturer of proprietary gearboxes. Nortons also appealed to ordinary motorcyclists who enjoyed the reliability and performance offered by single-cylinder engines with separate gearboxes. The marque withdrew their teams from racing in 1938, but between 1937 and 1945 nearly one quarter (Over 100,000) of all British military motorcycles were Nortons, basically the WD 16H (solo) and WD Big Four outfit (with driven sidecar wheel). After the War, Norton reverted to civilian motorcycle production, gradually increasing the range. A major addition in 1949 was the Dominator, also known as the Model 7, a pushrod 500 cc twin cylinder machine designed by Bert Hopwood. Its chassis was derived from the ES2 single, with telescopic front and plunger rear suspension, and an updated version of the gearbox known as the 'horizontal' box. Post war, Norton struggled to reclaim its pre-WWII racing dominance, since the single cylinder machine was facing fierce competition from the multi-cylinder Italians, and AJS at home. In the 1949 Grand Prix motorcycle racing season, the first year of the world championship, Norton only made fifth place, and AJS won. That was before the Norton Featherbed frame appeared, developed for Norton by the McCandless brothers of Belfast in January, 1950, used in the legendary Manx Norton, and raced by riders including Geoff Duke, John Surtees and Derek Minter. Overnight the featherbed frame was the benchmark by which all other frames were judged. Nortons were winners again. Norton also experimented with engine placement, and discovered that moving the engine slightly up/down, forward/back, or even right/left, could deliver a "sweet spot" in terms of handling. In 1951 the Norton Dominator became available in export markets as the Model 88 with the Featherbed frame. Later, as production of this frame increased, it became a regular production model, and was made in variants for other models, including the ohv single cylinder machines. The racing successes were transferred to the street through Cafe racers, some of whom would use the feather bed frame with an engine from another manufacturer to make a hybrid machine with the best of both worlds. The most famous of these were Tritons - Triumph twin engines in a Norton feather-bed frame. Despite, or perhaps because of the racing successes, Norton was in financial difficulty. Reynolds could not make many of the highly desired featherbed frames, and customers lost interest in buying machines with the older frames. In 1953, Norton was sold to Associated Motorcycles ( AMC ), who also owned the brands AJS, Matchless, Francis-Barnett and James. The Birmingham factory was closed in 1962 and production was moved to AMC 's Woolwich factory in south east London . Under AMC ownership, a much improved version of the Norton gearbox was developed, to be used on all the larger models within the corporation under the AJS, Matchless and Norton banners. Again, the major changes were for improved gear selection. In late 1955 a 600 cc Dominator 99 appeared.

In 1960, a new version of the featherbed frame was developed, with the upper frame rails bent inwards to reduce the width between the rider's knees for greater comfort. The move was also to accommodate the shorter rider, as the wide frame made it difficult to reach the ground. This frame was made in-house by AMC , and is known as the 'slimline' frame - the earlier frames then became known as the 'wideline'. The last Manx Nortons were sold in 1963. Even though Norton had pulled out of racing in 1954, the Manx had become the backbone of privateer racing, and even today are quite sought after. In January 1961 a new Norton Manxman 650c was launched for the American market only. One year later a Norton 650SS appeared,for the UK market along with the Norton Atlas 750 in 1962. For the American market more power was desired. Featherbed frames were still used, but the increases to the vertical twins engine capacity had caused a vibration problem at 4500 rpm. A 500 cc vertical twin is smoother than a single cylinder, but if you enlarge the vertical twin's capacity, vibration increases. The 750 Norton Atlas proved too expensive, and costs could not be reduced. Financial problems gathered. There was an export bike primarily for use as a desert racer, sold up until 1969 as a Norton P11, AJS Model 33, and as a Matchless G15, which used the Norton Atlas engine in a modified Matchless G85CS scrambler frame, with Norton wheels and front forks. This bike was reputed to vibrate less than the featherbed frame model. AMC singles were also sold with Norton badging in this era. By the late 1960s competition from Japan and a rapidly declining home market had driven the whole British motorcycle industry into a precipitous decline. In 1966 AMC collapsed and was reformed as Norton-Villiers part of Manganese Bronze. The 750 Norton Atlas, was noted for its vibration. Rather than change engines, Norton decided to change the frame, and the isolastic-framed Norton Commando 750 was the result. In 1969 the Commando was introduced; its styling, innovative isolastic frame, and powerful engine made it an appealing package. The Commando easily outperformed Triumph and BSA, and was the most powerful and best-handling British motorcycle of its day. The "isolastic frame," derived from the Featherbed, made it much smoother than the Atlas. It used rubber bushings to isolate the engine and swingarm from the frame, forks, and rider. As the rubber bushings wore, however, the bike became prone to fishtailing in high-speed turns. The customer could choose between single and dual carburettors, and the bike came in several different styles: the standard street model, a pseudo-scrambler with upswept pipes, and the Interstate, packaged as a tourer. Electric start was introduced in 1974. Sales were respectable, but the company declined financially and went into liquidation in 1975. In 1976 a Norton with a US-flag theme on the tank could be purchased for $1976. The 'Combat' engine was released in January 1972, with a twin roller bearing crank, 10:1 compression and making 65 bhp (48.5 kW) at 6,500 rpm. Reliability immediately proved a problem. (Older engines had used one ball bearing main, and one roller bearing main.) This fragility did not show up well, especially when compared to the reliability of the Japanese bikes. In 1972, the former giant of British motorcycle manufacturing BSA was also in trouble. It was given government help on the condition that it merged with Norton-Villiers, and in 1973 the new Norton-Villiers-Triumph (NVT) was formed. The Triumph Motorcycles name came from BSA's Triumph subsidiary. In April 1973 an 8.5:1 compression 828 cc "850" engine was released with German SuperBlend bearings, which made 51 bhp (38 kW) at 6,250 rpm however the stated power does not give a true picture of the engine performance because increased torque seemed to make up for the lower horsepower. In 1974, the outgoing government withdrew the subsidies, although the incoming government restored them after the election. Rationalisation of the factory sites to Wolverhampton and Birmingham (BSA's Small Heath site) only caused industrial disputes at Triumph's Coventry site; Triumph would go on as a workers cooperative alone. Despite mounting losses, 1974 saw the release of the ‘828 Roadster’, ‘Mark 2 Hi Rider’, ‘JPN Replica’ (John Player Norton) and ‘Mk.2a Interstate’. In 1975 this was down to just two models, the 'Mark 3 Interstate' and the 'Roadster', but then the Government asked for a repayment of its loan and refused export credits, further damaging the company's ability to sell abroad. Production of the two lone models still made was ended and supplies dwindled. During the 1990s, Kenny Dreer of Oregon evolved from restoring and upgrading Commandos to producing whole machines. He modernised the design and in the early 2000s went into series production, but then suspended operations in April 2006. After fifteen years of US ownership the Norton brand has now been secured by Stuart Garner, UK businessman and owner of Norton Racing Ltd. Garner plans to develop a new 15000 sq foot Norton factory at Donnington Park . In the UK a number of firms such as the remnant of the Shenstone Norton factory, Norvil, Unity Equipe and Norman White, a former team racer and mechanic, supply parts for various generations of Norton motorcycles.

 

We have more photos listed on Ebay, also motorcycle (racing) photos! Check them out and use the shipping discount! You can always contact us for any requests.

 

This is your rare chance to own this non period photo that reflects a very interesting and historic piece of motorcycle and Norton ’s history. Therefore it is printed in a nice large format of ca. 7.7" x 12" (ca. 19.4 cm x 30 cm ).

Shipping costs will only be $ 7.00 regardless of how many photos you buy.   For 5 or more photos, shipping is free!

  (Note: A. Herl, Inc. does not appear on photo, for ebay purposes only)

No copyright expressed or implied. Sold as collectable item only. We are clearing out our archives that we have gathered from various sources.

All items always sent well protected in PVC clear files and board backed envelopes.

 

We have photographs that came from professional collections and/or were bought from the original photographer or press studio! They are all of professional and excellent quality.

 

After many decades of professionally collecting photographs and posters we are clearing out our archives. They make the perfect gift and are perfectly suited for framing. They will look gorgeous unframed and will be a true asset nicely framed with a border. They are a gorgeous and great asset in every home, workshop, workplace, restaurant, bar or club!

 

First come - first served. And you can always contact us for your requests. Please ask any questions before the auction ends.

  • Condition: New

PicClick Insights - Norton 500 Domiracer Doug Hele 1961 3RD place Isle of Man Senior TT photo PicClick Exclusive

  •  Popularity - 0 watchers, 0.0 new watchers per day, 472 days for sale on eBay. 0 sold, 1 available.
  •  Best Price -
  •  Seller - 5,554+ items sold. 1% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive