Eucalyptus Smoked Figured wood veneer 7/16" x 120" thin fleece back 1/40" thick

$22.23 Buy It Now or Best Offer, Click to see shipping cost, eBay Money Back Guarantee
Seller: jsowoodproducts ✉️ (6,440) 99.7%, Location: Louisville, Kentucky, US, Ships to: WORLDWIDE, Item: 114029586890 Eucalyptus Smoked Figured wood veneer 7/16" x 120" thin fleece back 1/40" thick.

Eucalyptus  Smoked Figured Australian Bees Wing wood veneer edgebanding 7/16 " x 120" inches with thin see through fleece backing and no adhesive nonglued. Apply with most any adhesive. 10' feet per price. Orders for more than one roll sent in one continuous roll. Ships in small box 6" x 6" x 2". Some photos may show other sizes but the veneer is the same. First photo most accurate color.

Trust the experience, knowledge and reputation that we have offered the wood industry since 1995.

Visit My eBay Store: JSO Wood Products

Unbacked and backed sheet veneer may be available.

About pictures : Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.

Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

 

Thickness : (will not always be exactly correct, but relatively close)

Paper-backed veneers = 1/40”  

Wood-backed veneers = 1/25”

Raw plain veneer with no backing = 1/32”-1/42”

How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge.

How to apply : Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.

How to finish : most any conventional finishing products can be used with veneer that is applied correctly.

 

Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect.

Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.

 

 

  • Condition: New
  • Eucalyptus smoked fumed edgebanding wood: Veneer figured figure smoke fume flexible edge QC
  • Model: Edgebanding edge banding edging band fleece roll
  • Veneer Cut: Quarter Cut
  • Veneer Type: Raw
  • Item Type: Veneer Roll
  • Wood Type: Eucalyptus
  • Brand: Smoked Figured Australian Eucalyptus wood veneer

PicClick Insights - Eucalyptus Smoked Figured wood veneer 7/16" x 120" thin fleece back 1/40" thick PicClick Exclusive

  •  Popularity - 1 watcher, 0.0 new watchers per day, 1,594 days for sale on eBay. Normal amount watching. 1 sold, 9 available.
  •  Best Price -
  •  Seller - 6,440+ items sold. 0.3% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive